http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
환자 SET-UP ERROR에 따른 선량분포와 DVH 변화 분석
김경태,주상규,안재홍,박영환,Kim KyoungTae,Ju SangGyu,Ahn JaeHong,Park YoungHwan 대한방사선치료학회 2004 大韓放射線治療技術學會誌 Vol.16 No.2
Introduction : The setup error due to the patient and the staff from radiation treatment as the reason which is important the treatment record could be decided is a possibility of effect. The SET-UP ERROR of the patient analyzes the effect of dose distribution and DVH from radiation treatment of the patient. Material & Methode : This test uses human phantom and when C-T scan doing, It rotated the Left direction of the human phantom and it made SET-UP ERROR , Standard plan and 3mm, 5mm, 7mm, 10mm, 15mm, 20mm with to distinguish, it made the C-T scan error. With the result, The SET-UP ERROR got each C-T image Using RTP equipment It used the plan which is used generally from clinical - Box plan, 3Dimension plan( identical angle 5beam plan) Also, ( CTV+1cm margin, CTV+0.5cm margin, CTV+0.3,cm margin = PTV) it distinguished the standard plan and each set-up error plan and The plan used a dose distribution and the DVH and it analyzed Result : The Box4 the plan and 3Dimension plan which it bites it got similar an dose distribution and DVH in 3mm, 5mm From rotation error and Rectilinear movement( $0\%{\sim}2\%$ ). Rotation error and rectilinear error 7mm, 10mm, 15mm, 20mm appeared effect it will go mad to a enough change in treatment ( $2\%{\sim}^11\%$ ) Conclusion : The diminishes the effect of the SET-UP ERROR must reduce move with tension of the patient Also, we are important accessory development and the supply that it reducing of reproducibility and the move 목적 : 방사선 치료에서 환자와 근무자에 의한 setup error등은 치료성적이 결정될 수 있는 중요한 요인이라고 볼 수 있다. 이에 환자와 근무자에 의한 SET-UP ERROR가 환자치료에 미치는 영향에 대하여 비교 분석하고자 한다. 대상 및 방법 : 실험은 human phantom을 이용하여 C-T scan시 Left방향의 Lateral Level을 0mm, 3mm, 5mm, 7mm, 10mm, 15mm, 20mm로 변화시켜 SET-UP ERROR를 유발하였고, 각각에 대하여 C-T scan을 시행하였고, SET-UP ERROR가 유발된 각각의 C-T image를 얻어 RTP장비를 이용하여 임상에서 많이 사용되는 plan을 사용하여 7개의 C-T image에 각각의 plan-대향이문조사plan, Box-4문조사plan, 3Dimension plan-3개를 시행하여 총 21개의 plan을 실시하였다. (CTV+1cm margin, CTV+0.5cm margin, CTV+0.3cm margin = PTV) 이렇게 얻어진 plan을 이용하여 SET-UP ERROR가 유발이 안된 0mm image의 plan 3개와 SET-UP ERROR가 있는 6개 image의 총 18개의 plan을 대향이문조사plan, Box4문조사plan, 3Dimension plan으로 나누어 선량분포와 DVH를 이용하여 비교 분석하였다. 결과 : SET-UP ERROR를 유발시킨 3mm, 5mm, 7mm C-T image에서는 대향이문조사plan을 제외하고는 모든 plan에서 충분히 치료에 영향을 미칠만한 변화가 나타났으며, Box4문조사plan에서는 SET-UP ERROR에 의한 CTV가 Field 밖으로 빠짐으로 선량분포와 DVH가 나빠지는 현상이 나타났다. 결론 : 환자의 움직임, CTV 3차원형태, CTV margin등이 치료에 영향을 미친다. 이러한 영향을 줄이기 위해서는 환자의 긴장감과 움직임을 줄일 수 있는 환자교육과 정확한 환자setup능력이 치료의 승패를 좌우한다고 생각된다. 또한 재현성과 움직임을 줄일 수 있는 accessory 개발과 보급이 중요하다.
FTTH망에서 호스트멀티캐스트를 이용한 개인 인터넷 방송 시스템 설계 및 구현
김경태(Kyoungtae Kim),손승철(Seungchul Son),허권(Kwon Heo),이형옥(Hyungok Lee),김경훈(Kyunghun Kim),남지승(Jiseung Nam) 한국정보과학회 2006 한국정보과학회 학술발표논문집 Vol.33 No.1
본 논문에서는 FTTH 환경에 의해 가입자까지 100Mbps 이상의 대역폭을 보장하면서 실제 서비스 되어질 수 있는 응용 시스템인 개인 인터넷 방송 시스템을 호스트 멀티캐스트 Scheme을 이용하여 설계 및 구현하였다. 전송 방식인 호스트 멀티캐스트에 대해 알아보고 개인 인터넷 방송 서버(Contents Provider)와 클라이언트(Host)의 구조에 효율적인 호스트 멀티캐스트 알고리즘인 Data Delivery Tree Algorithm(DDTA)를 제안하고, DDTA 알고리즘이 FTTH 환경에서 HDTV급 고화질 영상을 전송할 수 있는 개인 인터넷 방송 시스템에 효율적인 알고리즘이라는 것을 보인다.
김경태(Kyoungtae Kim),Marie-Helene Duby,Weiwei Deng,Tommaso Gomez,Alessandro Gomez,김상수(Sangsoo Kim) 대한기계학회 2006 대한기계학회 춘추학술대회 Vol.2006 No.6
The multiplexing system which can retain the characteristics of the cone-jet mode is indispensable for the<br/> electrospray capabilities to have an impact in high-value-added application. This experiment reports a novel<br/> approach to multiplexing based on a well-known, but hitherto unexploited, the multi-jet mode. Ordinarily,<br/> such a mode is rather unsteady and the range of flow rates at which appreciable multiplexing is achieved is<br/> small. However, if the multi-jet mode is anchored by grooves machined at the outlet of the atomizer, to<br/> intensify the electric field at discrete points around its perimeter, then the cone-jets are simultaneously<br/> anchored at these grooves and a stable mode of operation is identified over several hundreds of volts and<br/> abroad range of flow rates. So long as the machining is accurately reproduced, droplets generated uniformly at<br/> each spray. As a result, a compact, inexpensive and versatile multiplexing system is realized without<br/> sacrificing droplet monodispersity.
김경태(Kyoungtae Kim),김상수(Sangsoo Kim) 대한기계학회 2008 대한기계학회 춘추학술대회 Vol.2008 No.5
The electrospray in the cone-jet mode has attracted a great deal of attention because it can produce highly charged ultrafine droplets with the monodispersity. However, the production of droplets via the cone-jet mode requires very low flow rates. This experiment reports a nonconducting grooved nozzle to increase the flow rates based on multi-jet mode. We investigated the characteristics of this grooved nozzle in terms of voltage domains, droplet size distributions, and spray currents. Each jet which generated in the grooved mode is anchored by grooves and fixed over several hundreds of volts. The grooves are acted by the flow paths which are easy to flow, not enhancing the electric field like a conducting grooved nozzle. The generated droplets were found to obey the same scaling law of the current with the cone-jet mode. Also, the nonconducting grooved nozzle is suitable for high compactness through the miniaturization using MEMS technique.