High Sustained Virologic Response with Daclatasvir plus Asunaprevir in HCV GT-1b Chinese, Korean and Taiwanese without Baseline NS5A Polymorphisms

( F. Mcphee ),( L. Wei ),( Q. Xie ),( Y. Suzuki ),( J. Toyota ),( Y. Karino ),( K. Chayama ),( Y. Kawakami ),( M. L. Yu ),( S. H. Ahn ),( N. Zhou ),( H. Kumada ) 대한간학회 2016 춘·추계 학술대회 (KASL) Vol.2016 No.1

Aims: Daclatasvir (DCV) plus asunaprevir (ASV) has demonstrated highsustained virologic response (SVR) in HCV genotype (GT-)1b infection.NS5A-Y93H and NS5A-L31 resistance-associated polymorphisms(RAPs) to DCV are known to impact DCV+ASV response in GT-1b-infectedJapanese. The effect of RAPs on SVR at posttreatment week12 (SVR12) to DCV+ASV was explored in mainland Chinese, Korean,and Taiwanese.Methods: Pooled data from 2 studies of DCV (60 mg daily) + ASV(100 mg capsule, twice-daily) for 24 weeks in GT-1b-infected interferon/ribavirin-naive and -experienced patients from mainland China,Korea, and Taiwan. Similar Japanese data (4 studies; n=445) werepooled for comparison. SVR12 with versus without baseline Y93Hand/or L31 RAPs was compared by age (<65 vs ≥65 years), cirrhosisstatus, and baseline HCV-RNA.Results: SVR12 and baseline NS5A sequences were available for 282patients (126 mainland Chinese [45%〕, 80 Koreans [28%〕, 76Taiwanese [27%〕). NS5A-Y93H and/or -L31 RAPs were observed pretreatmentin 8% mainland Chinese, 14% Korean, and 18%Taiwanese patients, compared with 19% in Japanese. SVR12 in allnon-Japanese patients is shown (Figure); rates were broadly similarbetween countries and with Japanese data (Japanese: 96% overallwithout RAPs, 41% with RAPs). Responses were lower among patientswith baseline RAPs. By contrast, SVR12 in patients without RAPs washigh (92-100%), irrespective of cirrhosis, age, or baseline HCV-RNA.Conclusions: At least 95% of HCV GT-1b-infected patients from mainlandChina, Korea or Taiwan without baseline NS5A-Y93H or -L31polymorphisms who had HCV-RNA ≤7 log10 IU/mL achieved SVR12on DCV+ASV, regardless of cirrhosis status and age.

Separation dynamics of hydrogen isotope gas in mesoporous and microporous adsorbent beds at 77 K: SBA-15 and zeolites 5A, Y, 10X

Chu, X.Z.,Cheng, Z.P.,Xiang, X.X.,Xu, J.M.,Zhao, Y.J.,Zhang, W.G.,Lv, J.S.,Zhou, Y.P.,Zhou, L.,Moon, D.K.,Lee, C.H. Pergamon Press ; Elsevier Science Ltd 2014 International journal of hydrogen energy Vol.39 No.9

The separation of a hydrogen isotope mixture on porous materials was studied using equilibrium and breakthrough experiments. The adsorption equilibria of H<SUB>2</SUB> and D<SUB>2</SUB> on SBA-15 with mesopores and molecular sieves 5A, Y, and 10X with micropores were measured at 77 K using the volumetric method. The breakthrough experiments of a H<SUB>2</SUB> and D<SUB>2</SUB> mixture in each adsorbent bed were carried out at various conditions of flow rate and pressure. The equilibrium ratio of D<SUB>2</SUB> to H<SUB>2</SUB> on mesoporous molecular sieves was larger than the ratio on microporous molecular sieves (SBA-15 > 10X > Y > 5A), but the difference among the adsorbents decreased with increases in pressure. On the other hand, the order of breakthrough separation factor showed the opposite result (SBA-15 < 10X < Y < 5A). The breakthrough separation factors for zeolite 10X was approximately equal to the equilibrium ratio of D<SUB>2</SUB> to H<SUB>2</SUB> at the corresponding partial pressures, whereas zeolites 5A and Y showed higher breakthrough separation factors than their equilibrium ratios. In SBA-15, the separation factors from breakthrough results were even smaller than the corresponding equilibrium ratio. In the microporous adsorbent with a limited pore size (zeolite 5A in the study), the diffusion mechanism contributed to the separation of hydrogen isotope gases as one of key factors.

Effect of Extenders and Temperatures on Sperm Viability and Fertilizing Capacity of Harbin White Boar Semen during Long-term Liquid Storage

Zhou, J.B.,Yue, K.Z.,Luo, M.J.,Chang, Z.L.,Liang, H.,Wang, Z.Y.,Tan, J.H. Asian Australasian Association of Animal Productio 2004 Animal Bioscience Vol.17 No.11

In this study the effect of extenders and temperatures on sperm viability and fertilizing capacity of boar sperm during long-term storage was investigated. Acrosomal integrity, membrane integrity, motility and hypo-osmotic resistance were evaluated by fluorescence and light microscopy. An in vitro fertilization test was performed to assess the fertilizing capacity of stored spermatozoa. The five diluents tested were ranked according to their ability to maintain sperm functional parameters and Zorlesco (ZO) extender with BSA or with PVA instead of BSA produced the best results. Zorlesco extender substituted with PVA (ZO+PVA) was found to maintain motility both at 15 and 20$^{\circ}C$. within 5 days of storage, but the quality of semen stored at 15$^{\circ}C$ decreased thereafter as compared to semen stored at 20$^{\circ}C$ Semen stored at 5$^{\circ}C$ demonstrated rapid loss of motility already within 24 h. Both fertilization and cleavage of semen stored at 20$^{\circ}C$ in ZO substituted with PVA instead of BSA did not change significantly until day 8 of storage. It is therefore concluded that PVA can be used to substitute for BSA and 20$^{\circ}C$ was more suitable than 15$^{\circ}C$ for boar semen storage, and in vitro fertilizing capacity of spermatozoa was maintained for at least 8 days in ZO+PVA at 20$^{\circ}C$.

Characterization and Formation Mechanism of Ni3Si–Al2O3 Nanocomposite Prepared by Mechanochemical Reduction Method

H. Chen,D. M. Zhou,L. Cai,Y. Y. Wang,K. Yu 대한금속·재료학회 2020 METALS AND MATERIALS International Vol.26 No.2

In this present work, Ni3Si–Al2O3 nanocomposite powders were synthesized by mechanical milling using NiO, Si and Alas raw materials. The phase transformation, formation mechanism and microstructure evolution of the powders duringmechanical milling were investigated by X-ray difraction (XRD), diferential thermal analysis (DTA), scanning electronmicroscopy (SEM), transition electron microscopy (TEM) and microhardness measurements. Results showed that the Ni3Si,Al2O3 and Ni31Si12 phases formed after 5 h of milling with a rapid mechanically induced self-propagating synthesis mode. The average grain size and internal strain of Ni3Si and Al2O3 after 30 h of milling were (16.8 nm, 1.27%) and (19.6 nm,0.94%), respectively. The maximum microhardness value of 813 HV was obtained in the 30 h milled powder. The relationship between the hardness and grain size of the powders satisfes the Hall–Petch relationship. Ni3Si–Al2O3 nanocompositepowders are very stable during heating at 950 °C. By annealing of the milled powders leads to grain growth, internal strainand microhardness of Ni3Si powder decrease and transformation of disordered structure to an ordered state. A long-rangeordering parameter (LRO) of 0.97 for the ordered Ni3Si can be achieved after annealing at 950 °C for 2 h.

Microstructural Stability and Creep Performance of a Novel Low-Cost Single Crystal Superalloy

Z. H. Tan,X. G. Wang,Y. L. Du,Y. M. Li,Y. H. Yang,J. L. Liu,J. D. Liu,J. G. Li,Y. Z. Zhou,X. F. Sun 대한금속·재료학회 2022 METALS AND MATERIALS International Vol.28 No.7

The increasing pursuit of advanced aero-engines with lower ratio between the cost and performance has greatly promotedthe demanding of single crystal superalloys characterized by low cost and outstanding temperature capability. In this study,a novel low-cost single crystal superalloy was designed and the creep tests as well as micro-characterization were carried outon the experimental alloy. The results illustrated that the novel single crystal alloy exhibited an ideal microstructural stabilitywithout precipitating TCP phases, after long-term thermal exposure at the ultimate service temperature of third generationsingle crystal superalloys. Moreover, the experimental alloy with only 3 wt% Re addition demonstrated remarkable creepresistance and maintained a very low minimum creep rate at 1100 °C/137 MPa and 1120 °C/137 MPa, while the accumulationand coalescence of micro-pores had eventually led to the alloy fracture. Apart from that, the compact interfacial dislocationnetworks the 2nd γ′ phase were observed after high-temperature creep rupture, and the typical a < 010 > superdislocationswith relatively poor mobility was found at 1120 °C. At 760 °C/800 MPa, both the minimum creep velocity and entire creepstain was increased evidently, however, the ultimate creep rupture life of the alloy had still reached 200 h. The correspondingdeformation mechanism was identified as the combination of superdislocation pairs shearing and a/3 < 121 > partial dislocationcutting the γ′ phase with a SISF being generated. In general, the novel single crystal alloy characterized by remarkablemechanical properties and cost reduction possesses a great potential for future application in the advanced aircraft engines.

Fluorinated Metal Hydrides for the Catalytic Hydrolysis of Metal - Hydrogen Complexes

Suda, S,Zhou, Y,Sun, Y M,Uchida, M,Liu, B H,Mormitu, S,Arai, K,Tsukamoto, N,Candra, Y,LI, Z P 대한금속재료학회(대한금속학회) 2001 METALS AND MATERIALS International Vol.7 No.1

This paper is related to the hydrogen storage (H-storage) system composed of an alkaline solution that contains metal-hydrogen complex ions. The BH₄^--complex ions stabilized when it is dissolved in aqueous KOH or NaOH to form homogeneous solutions. However, it is necessary to apply an appropriate catalyst for a high rate generation of hydrogen under atmospheric pressure and temperature conditions. The authors intended to develop catalysts suitable for the hydrolysis of BH₄^--complex ion solutions and found that Mg₂Ni exhibits excellent catalytic functions in the hydrolysis, in particular, after the fluorination treatment (F-treatment). In this work, the effects of F-treatment on the rates of hydrolysis were evaluated between the hydrided and unhydrided Mg₂Ni. No hydrogenation in addition to F-treatment is required in view of hydrolysis kinetics and cost-effectiveness.

Photoelectrochemical water splitting employing a tapered silicon nanohole array

Jung, J. Y.,Choi, M.,Zhou, K.,Li, X.,Jee, S. W.,Um, H. D.,Park, M. J.,Park, K. T.,Bang, J.,Lee, J. H. Royal Society of Chemistry 2014 Journal of Materials Chemistry A Vol.2 No.3

An effective photocathode adopting a tapered Si nanohole (SiNH) array has been developed for photoelectrochemical water splitting. The tapered feature of SiNH photocathodes resulted in a gradation of the refractive indices between Si and air, such that the mismatching of optical impedance was alleviated and light absorption was enhanced. Adjusting the depth of the SiNHs successfully simulated the number of dielectric layers, optimizing the destructive interference for an antireflective coating (ARC). Only a 200 nm-thin NH array was required to absorb similar to 96% of solar spectral irradiance for photoelectrochemical applications. This thickness also minimized the undesirable surface recombination loss. When compared to a similar system using a planar technology, the formation of NHs was observed to cause an increase in the optical bandgap. This could generate a surface-passivation effect, resulting in a lowering of dark current and an increase in photovoltage, which could be utilized for an anodic shift of the onset voltage. Due to the addition of tapered SiNHs, the photogenerated current was improved by similar to 30% (similar to 33 mA cm(-2)) compared to a planar counterpart (similar to 25 mA cm(-2)), while the overpotential required for H-2 evolution was reduced.

Emergence and Persistence of NS5A and NS3 Resistance-Associated Substitutions in HCV Genotype 1b Patients Treated with Daclatasvir and Asunaprevir

( F. Mcphee ),( D. Hernandez ),( N. Zhou ),( F. Yu ),( B. Kienzle ),( Y. Zhao ),( M. Linaberry ),( S. Noviello ),( M. L. Yu ),( S. H. Ahn ),( Y. Karino ),( K. Chayama ),( H. Kumada ) 대한간학회 2017 춘·추계 학술대회 (KASL) Vol.2017 No.1

Aims: A pooled analysis of emergent RAS was performed in HCV genotype (GT-)1b-infected patients receiving daclatasvir and asunaprevir (DCV+ASV) and the persistence of DCV- and ASV-resistant substitutions through ≥post-treatment Week (PTWK)192 was assessed to understand the RAS profile and help guide potential retreatment options. Methods: HCV GT-1b-infected patients without a sustained virologic response (SVR) and with HCV RNA ≥1000 IU/mL on or after DCV+ASV treatment were included from 5 Phase 2 and 3 studies. Baseline and post-baseline plasma samples were sequenced at a sensitivity cut-off ł20%. To determine the persistence of emergent RAS, samples at the end of study (up to PTWK48) and/or from a 3-year long-term follow-up rollover study were sequenced (sensitivity cut-off ≥20%, and ≥1% for select samples). Results: 152 DCV+ASV-treated patients without SVR met the resistance testing criteria: 89% (136/152) had NS5A and 95% (145/152) had NS3 sequences at both baseline and virologic failure (VF). NS5A and NS3 RAS emerged in 99% (134/136) and 89% (129/145), respectively, at VF (Table). Overall, 93% (142/152) of patients with VF had both NS5A and NS3 sequence data at failure, of which 77% (109/142) had RAS at L31, Y93 and D168. Emergent NS5A RAS persisted at PTWK96 (92%;24/26) and ≥PTWK192 (100;7/7compared with 22% (6/27) and 14% (1/7), respectively, for emergent NS3 RAS. Replacement of emergent NS5A and NS3 RAS observed at VF occurred in 8% (2/26) of NS5A and 74% (17/23) of NS3 sequences at PTWK96 and in 0% (0/7) of NS5A and 86% (6/7) of NS3 sequences at ≥PTWK192. Conclusions: NS5A and NS3 RAS emerged in most patients treated with DCV+ASV who experienced VF, and NS5A RAS persisted post-treatment. Therapy options for DCV+ASV treatment failures may depend on the timing of retreatment: an NS3 inhibitor-containing regimen may be possible if NS3 RAS are no longer observed, while regimens not impacted by the NS5A-L31+Y93 and NS3-D168 RAS combination would offer an immediate alternative.

Multiphysics Simulation of Thermal-Fluid Behavior in Laser Powder Bed Fusion of H13 Steel: Influence of Layer Thickness and Energy Input

K. W. Shao,W. H. Zhou,K. Gao,X. G. Zhu,P. Jia,Y. Li 대한금속ᆞ재료학회 2023 METALS AND MATERIALS International Vol.29 No.2

Catastrophic brittle failure prevents the application of bulk metallic glasses (BMGs).The brittle La69Co17Al14BMG showslarge compressive plasticity when compressed in constrained conditions. Here the compressive plasticity of this BMG wassystematically studied by decreasing aspect ratio (height/diameter) of the samples in uniaxial compression and the brittleductiletransition occurs at an aspect ratio of 0.36. With the increase of the plasticity (decrease of the aspect ratio), the hardnessdecreases firstly and then increases, however, the relaxation enthalpy indicating its structure increases monotonically. Our findings provide a powerful experimental support for the application of brittle La-based BMGs.

Effects of Fabric Surface Energy on Human Thermophysiological Responses during Exercise and Recovery

Zhou, L.Y.,Li, Y.,Chung, J.,Tokura, H.,Gohel, M.D.I.,Kwok, Y.L.,Feng, X.W. The Korean Fiber Society 2007 Fibers and polymers Vol.8 No.3

The present paper reports a study on influences of fabric surface energy of cotton and polyester garments on clothing microclimates and human thermophysiological responses during intermittent exercise and recovery. Eight healthy males wearing the garments prepared performed exercises and rest according to the following protocol: rest for 30 min, run on treadmill for total 60 min of three sessions with different intensity and duration, and then sit quietly for 30 min for recovery, all at $30^{\circ}C$ and relative humidity of 30 %, while the microclimate humidity ($H_{mc}$) and temperature ($T_{mc}$), the clothing outside surface humidity ($H_{co}$) and temperature ($T_{co}$), the skin temperatures and ear canal temperature ($T_{ear_canal})$ were measured. The garments are made of: (a) hydrophilic and hydrophobic cotton knitted fabrics, and (b) hydrophilic and hydrophobic polyester knitted fabrics. During and after exercise, for cotton, hydrophilic garment resulted in significant lower ${\Delta}H_{mc}$, ${\Delta}H_{co}$, ${\Delta}T_{mc}$, during recovery, higher ${\Delta}{\bar{T}}_{sk}$, lower ${\Delta}T_{ear_canal}$ and ${\Delta}T_{forehead}$. For polyester, hydrophilic garment resulted in significantly lower ${\Delta}H_{co}$, ${\Delta}T_{co}$, higher ${\Delta}T_{forehead}$, during E1, E2 and recovery session but lower during E3. In summary, surface energy of cotton garments had significant influences on human thermophysiological responses during exercise and recovery, and hydrophilic cotton garment was better than hydrophobic one to reduce heat stress. Surface energy of polyester garments had influences of lower significance, and hydrophilic garment appeared better than hydrophobic garment.