Microstructural Stability and Creep Performance of a Novel Low-Cost Single Crystal Superalloy

Z. H. Tan,X. G. Wang,Y. L. Du,Y. M. Li,Y. H. Yang,J. L. Liu,J. D. Liu,J. G. Li,Y. Z. Zhou,X. F. Sun 대한금속·재료학회 2022 METALS AND MATERIALS International Vol.28 No.7

The increasing pursuit of advanced aero-engines with lower ratio between the cost and performance has greatly promotedthe demanding of single crystal superalloys characterized by low cost and outstanding temperature capability. In this study,a novel low-cost single crystal superalloy was designed and the creep tests as well as micro-characterization were carried outon the experimental alloy. The results illustrated that the novel single crystal alloy exhibited an ideal microstructural stabilitywithout precipitating TCP phases, after long-term thermal exposure at the ultimate service temperature of third generationsingle crystal superalloys. Moreover, the experimental alloy with only 3 wt% Re addition demonstrated remarkable creepresistance and maintained a very low minimum creep rate at 1100 °C/137 MPa and 1120 °C/137 MPa, while the accumulationand coalescence of micro-pores had eventually led to the alloy fracture. Apart from that, the compact interfacial dislocationnetworks the 2nd γ′ phase were observed after high-temperature creep rupture, and the typical a < 010 > superdislocationswith relatively poor mobility was found at 1120 °C. At 760 °C/800 MPa, both the minimum creep velocity and entire creepstain was increased evidently, however, the ultimate creep rupture life of the alloy had still reached 200 h. The correspondingdeformation mechanism was identified as the combination of superdislocation pairs shearing and a/3 < 121 > partial dislocationcutting the γ′ phase with a SISF being generated. In general, the novel single crystal alloy characterized by remarkablemechanical properties and cost reduction possesses a great potential for future application in the advanced aircraft engines.

Separation dynamics of hydrogen isotope gas in mesoporous and microporous adsorbent beds at 77 K: SBA-15 and zeolites 5A, Y, 10X

Chu, X.Z.,Cheng, Z.P.,Xiang, X.X.,Xu, J.M.,Zhao, Y.J.,Zhang, W.G.,Lv, J.S.,Zhou, Y.P.,Zhou, L.,Moon, D.K.,Lee, C.H. Pergamon Press ; Elsevier Science Ltd 2014 International journal of hydrogen energy Vol.39 No.9

The separation of a hydrogen isotope mixture on porous materials was studied using equilibrium and breakthrough experiments. The adsorption equilibria of H<SUB>2</SUB> and D<SUB>2</SUB> on SBA-15 with mesopores and molecular sieves 5A, Y, and 10X with micropores were measured at 77 K using the volumetric method. The breakthrough experiments of a H<SUB>2</SUB> and D<SUB>2</SUB> mixture in each adsorbent bed were carried out at various conditions of flow rate and pressure. The equilibrium ratio of D<SUB>2</SUB> to H<SUB>2</SUB> on mesoporous molecular sieves was larger than the ratio on microporous molecular sieves (SBA-15 > 10X > Y > 5A), but the difference among the adsorbents decreased with increases in pressure. On the other hand, the order of breakthrough separation factor showed the opposite result (SBA-15 < 10X < Y < 5A). The breakthrough separation factors for zeolite 10X was approximately equal to the equilibrium ratio of D<SUB>2</SUB> to H<SUB>2</SUB> at the corresponding partial pressures, whereas zeolites 5A and Y showed higher breakthrough separation factors than their equilibrium ratios. In SBA-15, the separation factors from breakthrough results were even smaller than the corresponding equilibrium ratio. In the microporous adsorbent with a limited pore size (zeolite 5A in the study), the diffusion mechanism contributed to the separation of hydrogen isotope gases as one of key factors.

Graded finite element simulation of thermal stress in inhomogeneous high-T_c superconductor

Gao, Z.W.,Zhou, Y.H.,Lee, K.Y. North-Holland 2010 Physica. C, Superconductivity Vol.470 No.22

YBa<SUB>2</SUB>Cu<SUB>3</SUB>O<SUB>y</SUB> is an orthotropic material with different material properties in a, b and c directions, such as Young's modulus, coefficient of thermal expansion (CTE), and thermal conductivity. It is assumed that the material properties of inhomogeneous high temperature superconductor (HTS) vary with different height coordinate and temperature. A model is presented in this paper to calculate the thermal stress of inhomogeneous HTS when temperature decreases from ambient to operating conditions (cryogenic temperatures). By fitting a second order polynomial to the experimental data, value of the material properties of inhomogeneous HTS can be obtained. Then, through the proposed graded finite element method, the coupled thermo-mechanical equations were solved numerically. The numerical results show that the temperature profiles distribute the function of time after soaking. It is notable that the temperature profile reaches steady in a very short period of time, so the thermal stress suddenly increases to a very high level for a bulk superconductor. It is also shown that the closer to the sample internal region it is, the larger the heat fluxes are. Besides, the maximum tensile stresses, i.e. the peeling stresses, occur near bottom corner of inhomogeneous HTS. It is intended that the model presented in this paper could be useful to researchers who are interested in mechanical properties of inhomogeneous HTS.

Effects of Korea Red Ginseng on Substance Metabolism and Endocrinic Funciton in Animals

Zhou, Z.M.,Li, Z.L.,Nie, S.Q.,Li, L.X.,Sun, X.M.,Wang, Y.L.,Liang, E.H.,Li, G.Q.,Yang, L.X. The Korean Society of Ginseng 1990 Journal of Ginseng Research Vol.14 No.2

Use of negative capacitance to simulate the electrical characteristics in double-gate ferroelectric field-effect transistors

Y.G. Xiao,M.H. Tang,Y. Xiong,J. C. Lin,C.P. Cheng,B. Jiang,H.Q. Cai,Z.H. Tang,X.S. Lv,X.C. Gu,Y.C. Zhou 한국물리학회 2012 Current Applied Physics Vol.12 No.6

The surface potential and drain current of double-gate metal-ferroelectric-insulator-semiconductor (MFIS) field-effect transistor were investigated by using the ferroelectric negative capacitance. The derived results demonstrated that the up-converted semiconductor surface potential and low subthreshold swing S = 34 (<60 mV/dec) can be realized with appropriate thicknesses of ferroelectric thin film and insulator layer at room temperature. What’s more, a reduction gate voltage about 260 mV can be reached if the ON-state current is fixed to 600 mA/mm. It is expected that the derived results can offer useful guidelines for the application of low power dissipation in ongoing scaling of FETs.

Optoelectronic Materials : EPITAXIALGROWTH AND CHARACTERIZATION OF RbTiOPO4 FILMS ON KTiOPO4 SUBSTRATES

Z . G . Liu,J . M . Liu,N . B . Ming,Z . C . Wu,Z . Y . Zhou 대한금속재료학회 ( 구 대한금속학회 ) 1995 Advanced Material and Processing Vol.2 No.-

Solidification and Evolution of β-NiAl Phase in a Re-Containing Single Crystal Superalloy

Y. M. Li,X. G. Wang,Z. H. Tan,Y. H. Yang,J. L. Liu,J. D. Liu,J. G. Li,Y. Z. Zhou,X. F. Sun 대한금속·재료학회 2022 METALS AND MATERIALS International Vol.28 No.10

The β-NiAl phase, which may exacerbate the high-temperature mechanical properties of Ni-based superalloy, was observedin a designed Re-containing single crystal superalloy. The solidification mechanism of β-NiAl phase and its evolutionafter solution treatment as well as long-term aging at 1120 °C were systematically investigated. The β-NiAl phase wasconfirmed by the analyses of XRD and TEM in as-cast specimen. Combined the analyses of TEM, DSC, phase diagramsand chemical segregation behaviors obtained via EPMA, the solidification path in interdendritic region was determined asL → (β-NiAl + Cr) eutectic, L → β + δ, L + β → γ′, L → γ′. The β-NiAl phase could be diminished by solution treatment and/or long-term aging treatment. After the solution treatment at 1330 °C for 30 min, the β-NiAl phase split into small bulks andthe δ phase dissolved, contributing to the formation of the γ + γ′ structure and large blocky δ phase. During the long-termaging at the 1120 °C, the β-NiAl phase transformed into γ and γ′ phase. With aging time prolonging, the Cr-rich phase dissolved,which promoted the precipitation of TCP confirmed as μ phase with three morphologies.

Effect of Feeding Enzymolytic Soybean Meal on Performance, Digestion and Immunity of Weaned Pigs

Zhou, S.F.,Sun, Z.W.,Ma, L.Z.,Yu, J.Y.,Ma, C.S.,Ru, Y.J. Asian Australasian Association of Animal Productio 2011 Animal Bioscience Vol.24 No.1

The objective of this study was to investigate the effect of enzymolytic products of soybean meal (ESBM), as one of the protein sources in the diet, on the growth performance, nutrient digestibility and immune function of weaned piglets. Soybean meal produced by bioprocessing with fermentation and enzymolysis contains reduced anti-nutritional factors and improved protein utilization. A total of 240 weaned piglets (Duroc${\times}$Landrace${\times}$Yorkshire, $9.01{\pm}0.22\;kg$ body weight) were randomly allocated to 4 treatments with 6 pens per treatment and 10 piglets per pen. The diets were based on corn-soybean meal and ESBM partially replaced soybean meal and soybean protein isolate at the inclusion level of 5, 10 or 15% in the basal diet. Feed intake and body weight were measured weekly. On days 24 to 27, faeces of each replicate were proportionally collected to determine the nutrient digestibility. On day 28 of the experiment, one piglet from each replicate was slaughtered humanely to collect immune organs. The results showed that inclusion of ESBM increased (p<0.05) the final weight, daily feed intake and daily gain of weaned pigs compared with the control diet, and ESBM at the inclusion levels of 10 and 15% improved (p<0.05) the feed/gain compared with the control diet. There were no differences (p>0.05) in daily feed intake among the levels of ESBM, but increasing the levels of ESBM from 5 to 15% improved (p<0.05) the final weight, average daily gain of pigs and feed/gain. The inclusion of ESBM at 5 to 15% increased (p<0.05) the digestibility of crude protein (CP) by 5 to 16%, and ESBM at 15% increased (p<0.05) the digestibility of digestible energy (DE), Ca and P compared with the control diet. ESBM increased (p<0.05) the relative weights of thymus and mandibular lymph nodes by 57.7 and 29.6%, respectively. The percentages of T lymphocytes, CD4+ and CD8+ in peripheral blood of weaned piglets were also increased (p<0.05) by feeding ESBM. The results suggest that ESBM can be a better protein source in improving growth performance, nutrient digestibility and immune function of weaned piglets.

Microstructure and infrared emissivity property of coating containing TiO_2 formed on titanium alloy by microarc oxidation

Z.W. Wang,Y.M. Wang,Y. Liu,J.L. Xu,L.X. Guo,Y. Zhou,J.H. Ouyang,J.M. Dai 한국물리학회 2011 Current Applied Physics Vol.11 No.6

Ceramic coatings containing TiO_2 were formed on Ti6Al2Zr1Mo1V alloy surface by microarc oxidation (MAO) method. The microstructure, phase and chemical composition of the coatings were analyzed by SEM, XRD and EDS techniques. The coating mainly consists of rutile TiO_2 and a small amount of anatase TiO_2. The infrared emissivity values of coated and uncoated titanium samples when exposed to 700 ℃were tested. It was found that the coating exhibits a higher infrared emissivity value (about 0.9) in the wavelength range of 8―14 mm than that of the uncoated titanium alloy, although which shows a slight increase from 0.1 to 0.3 with increasing exposure time at 700 ℃. The relatively high infrared emissivity value of the MAO coating is possibly attributed to the photon emission from the as formed TiO_2 phase.

Effect of Extenders and Temperatures on Sperm Viability and Fertilizing Capacity of Harbin White Boar Semen during Long-term Liquid Storage

Zhou, J.B.,Yue, K.Z.,Luo, M.J.,Chang, Z.L.,Liang, H.,Wang, Z.Y.,Tan, J.H. Asian Australasian Association of Animal Productio 2004 Animal Bioscience Vol.17 No.11

In this study the effect of extenders and temperatures on sperm viability and fertilizing capacity of boar sperm during long-term storage was investigated. Acrosomal integrity, membrane integrity, motility and hypo-osmotic resistance were evaluated by fluorescence and light microscopy. An in vitro fertilization test was performed to assess the fertilizing capacity of stored spermatozoa. The five diluents tested were ranked according to their ability to maintain sperm functional parameters and Zorlesco (ZO) extender with BSA or with PVA instead of BSA produced the best results. Zorlesco extender substituted with PVA (ZO+PVA) was found to maintain motility both at 15 and 20$^{\circ}C$. within 5 days of storage, but the quality of semen stored at 15$^{\circ}C$ decreased thereafter as compared to semen stored at 20$^{\circ}C$ Semen stored at 5$^{\circ}C$ demonstrated rapid loss of motility already within 24 h. Both fertilization and cleavage of semen stored at 20$^{\circ}C$ in ZO substituted with PVA instead of BSA did not change significantly until day 8 of storage. It is therefore concluded that PVA can be used to substitute for BSA and 20$^{\circ}C$ was more suitable than 15$^{\circ}C$ for boar semen storage, and in vitro fertilizing capacity of spermatozoa was maintained for at least 8 days in ZO+PVA at 20$^{\circ}C$.