동결견(凍結肩) 환자의 동서협진 치료의 임상효과 비교연구 : 견관절 가동운동범위(ROM) 변화를 중심으로

남동우,김행범,양동훈,임사비나,김건식,이두익,이재동,최도영,이윤호 경희대학교 동서의학연구소 2006 東西醫學硏究所 論文集 Vol.2006 No.-

Objectives : To establish an effective collaborate medicine treatment of acupuncture and western medicine for treating frozen shoulder patients. Methods : 59 voluntary patients were randomly assigned to Eastern treatment group(E group, n=22), Western treatment group(W group, n=17) and East-West treatment group(EW group, n=20). The E group received acupuncture treatment on LI15, TE14, GB21 and Master Dong's acupuncture points, Shin-gwan and Gyun-joong, twice a week for 4 weeks. The W group received suprascapular nerve block, subacromial injection and trigger point injection, twice a week for 4 weeks. The EW group received acupuncture and injection treatment including nerve block. All groups were instructed to practice self exercise during their daily lives. Evaluations were made before treatment and after treatment based on the change in shoulder Range of Motion(ROM) and the patient's satisfaction concerning the treatment was measured by Visual Analogue Scale(VAS). The obtained data were analyzed and compared. Results : The patient's satisfaction scores were E group 5.67, W group 7.73 and EW group 7.67. The E group and the EW group showed significant improvement in abbduction, adduction and flexion(p<0.05). The W group showed significant improvement in adduction(p<0.05). Abduction significantly improved(p<0.05) in the EW group compared to E group and W group. Flexion also showed improvement in the EW group, but the difference among the 3 groups was statistically insignificant. The three group's difference of change in extension and adduction was insignificant(p>0.05). Conclusion : Acupuncture and nerve block alone significantly improved ROM in frozen shoulder patients. Also collaborate treatment of acupuncture and nerve block significantly improved ROM in frozen shoulder patients. But the difference of the three treatments were significant only for improving abduction(p<0.05).

한의진단명과 진단요건의 표준화 연구 II (표준화 실례) : 2차년도 연구결과 중간 보고

양기상,최선미,최승훈,안규석,박경모,박종현,김성우,신승호,정우열,전병훈,고현,김정범,신상우,김성훈,김동희,권영규,엄현섭,장혜옥 한국한의학연구원 1996 한국한의학연구원논문집 Vol.2 No.1

The diagnostic requirements were suggested and explained regarding the systems of differentiation of symptoms and signs in the second year study of standardization and unification of the terms and conditions used for diagnosis in oriental medicine. The systems were as follows; - differential diagnosis according to condition of body fluid, differentiation of syndromes according to the state of qi and blood, differential diagnosis according to relative excessiveness or deficiency of yin and yang(氣血陰陽津液辨證) - differentiation of diseases according to pathological changes of the viscera and their interrelation - analyzing and differentiating of febrile diseases in accordance with the theory of the six channels(傷寒辨證) The individual diagnosis pattern was arranged by the diagnostic requirements in the following order : another name(異名), notion of diagnosis pattern, index of differentiation of symptoms and signs(辨證指標), the main point of diagnosis, analysis of diagnosis pattern(證候分析), discrimination of diagnosis pattern(證候鑑別), a way of curing a diseases(治法), prescription(處方), herb in common use(常用藥物), diseases appearing the diagnosis pattern(常見疾病), documents(文獻調査). This study was carried out on the basis of the Chinese documents and references.

동결견(凍結肩) 환자의 동서협진 치료의 임상효과 비교연구 - 견관절 가동운동범위(ROM) 변화를 중심으로 -

남동우,김행범,양동훈,임사비나,김건식,이두익,이재동,최도영,이윤호,Nam, Dong-Woo,Kim, Haeng-Beom,Yang, Dong-Hoon,Lim, Sa-Bi-Na,Kim, Keon-Sik,Lee, Doo-Ik,Lee, Jae-Dong,Choi, Do-Young,Lee, Yun-Ho 대한침구의학회 2006 대한침구의학회지 Vol.23 No.5

Objectives : To establish an effective collaborate medicine treatment of acupuncture and western medicine for treating frozen shoulder patients. Methods : 59 voluntary patients were randomly assigned to Eastern treatment group(E group, n=22), Western treatment group(W group, n=17) and East-West treatment group(EW group, n=20). The E group received acupuncture treatment on LI15, TE14, GB21 and Master Dong's acupuncture points, Shin-gwan and Gyun-joong, twice a week for 4 weeks. The W group received suprascapular nerve block, subacromial injection and trigger point injection, twice a week for 4 weeks. The EW group received acupuncture and injection treatment including nerve block All groups were instructed to practice self exercise during their daily lives. Evaluations were made before treatment and after treatment based on the change in shoulder Range of Motion(ROM) and the patient's satisfaction concerning the treatment was measured by Visual Analogue Scale(VAS). The obtained data were analyzed and compared. Results : The patient's satisfaction scores were E group 5.67, W group 7.73 and EW group 7.67. The E group and the EW group showed significant improvement in abbduction, adduction and flexion(p<0.05). The W group showed significant improvement in adduction(p<0.05). Abduction significantly improved(p<0.05) in the EW group compared to E group and W group. Flexion also showed improvement in the EW group, but the difference among the 3 groups was statistically insignificant. The three group's difference of change in extension and adduction was insignificant(p>0.05). Conclusion : Acupuncture and nerve block alone significantly improved ROM in frozen shoulder patients. Also collaborate treatment of acupuncture and nerve block significantly improved ROM in frozen shoulder patients. But the difference of the three treatments were significant only for improving abduction(p<0.05).

풍력 발전기의 모델링 및 피치제어 시뮬레이션

최민호,임종환,허종철,이동현,김건훈 濟州大學校 産業技術硏究所 2000 산업기술연구소논문집 Vol.11 No.1

Wind turbine system converts wind energy into electric energy. Since the velocity of wind is random in nature. control of the angular velocity of the blade is needed in order to generate high quality electric power. The control of a blade can be divided into a stall regulation type and a pitch control type. The stall regulation type which uses an aerodynamic stall is simple and cheap, but it suffers from fluctuation of the resulting power. On the contrary. pitch control type is based on the fact that the torque of the blade can be changed by varying the pitch angle of the blade. It is mechanically and mathematically complicated. but the control performance is better than that of the stall regulation type. This paper derives a mathematical modeling of the wind turbine system, and suggests a pitch control algorithm. The validity of the algorithm is demonstrated with the results produced through sets of simulation.

복합 레진으로 수복된 세 가지 첨와형태 와동의 파절 저항성에 관한 연구

최훈수,신동훈 大韓齒科保存學會 2008 Restorative Dentistry & Endodontics Vol.33 No.3

심미성 복합레진은 자연 치질을 보존시키며 나아가 잔존 치질의 강도를 강화시켜 준다. 복합레진 수복시 더 많은 치질을 남기기 위해 첨와 (undercut) 형태의 교합면 치질을 남긴 채 복합레진으로 수복하는 경무가 많으나,어느 정도 강도가 복원되는지에 대해서는 잘 알려져 있지 않다. 이에 본 연구에서는 첨와 형태의 와동을 잔존 치질의 두께 (법랑질 /법랑질과 상아질)에 따라 형성하고 복합레진으로 충전한 경우, 수복된 치아의 파절 저항성을 손상이 없는 자연치와 비교평가하였다. 상악 대구치 40개의 교합면을 편평하게 삭제한 후 방사선 사진에서 치수각의 위치를 확인하였다. 대상 치아를 각 10개씩 4개군으로 분류하였으며, 1 ~ 3군은 실험군으로 모두 협측에 깊이 7 ㎜, 근원심 폭경 5 ㎜의 첨와 형태 와동을 형성하였고, 와동저에서 치수각까지의 거리를 약 0.5 ㎜로 유지하였으며 교합면쪽의 치질 두께를 달리하였다. 1군은 법랑질과 소량의 상아질로 구성된 치질 두께를 1 ㎜, 2군은 법 랑질과 상아질의 두께를 1.5 ㎜, 3군은 법 랑질과 상아질의 두께를 2 ㎜가 되도록 하였고, 4군은 건전한 자연치를 와동형성 없이 대조군으로 사용하였다. 두께 측정은 방사선 사진을 스캔한 후 길이 확대 프로그램을 이용하였다. 각 와동을 37% 인산으로 산부식한 다음 단일병 접착제 Single Bond™ (3M/ESPE, USA)를 적용하였고 흔합형 복합레진 Filtek Z-250™ (3M/ESPE, USA)을 사용하여 적층 충전하였다. 치아를 실온에서 증류수에 24시간 동안 보관한 다음 Sof-Lex system (3M/ESPE, USA)을 사용하뗘 연마하였다. 이후 자가중합형 레진에 교합면을 기저부에 평행한 상태로 치근부를 매몰한 다음 Universal testing machine (Zwick Z010, Germany)에서 지름 3 ㎜의 staineless steel rod를 1 mm/min의 cross-head speed로 하중을 가하여 파절 강도를 측정하였다. 통계 분석은 95%유의 수준의 One-way ANOVA와 Tukey test를 이용하였으며 다음과 같은 결과를 얻었다. 1. 와동 형성 후 복합레진을 수복한 군들은 대조군에 비해 약 75%의 파절 강도를 보였다. 2. 교합면쪽 잔존 치질의 두께에 따른 파절 저항은 유의한 차이를 보이지 않았다 (p>0.05). 복합레진을 이용하여 첨와 형태의 와동을 수복한 후 파절 강도를 측정 한 결과 건전 치아보다는 강도가 낮았지만, 상부의 잔존 치질이 대부분 법랑질로 이루어진 경우에도 복합 레진으로 수복하면 건전 치아 파절 강도의 75%까지 유지할 수 있다는 결론을 얻었다. It was reported that esthetic composite resin restoration reinforces the strength of remaining tooth structure with preserving the natural tooth structure. However, it is unknown how much the strength would be recovered. The purpose of this study was to compare the fracture resistance of three types of undermined cavity filled with composite resin with that of non-cavitated natural tooth. Forty sound upper molars were allocated randomly into four groups of 10 teeth. After flattening occlusal enamel, undermined cavities were prepared in thirty teeth to make three types of specimens with various thickness of occlusal structure (Group 1 ~ 3). All the cavity have the 5 ㎜ width mesio-distally and 7 ㎜ depth bucco-lingually. Another natural 10 teeth (Group 4) were used as a control group. Teeth in group 1 have remaining occlusal structure about 1 ㎜ thickness, which was composed of mainly enamel and small amount of dentin. In Group 2, remained thickness was about 1.5 ㎜, including 0.5 ㎜ thickness dentin. In Group 3, thickness was about 2.0 ㎜, including 1 ㎜ thickness dentin. Every effort was made to keep the remaining dentin thickness about 0.5 ㎜ from the pulp space in cavitated groups. All the thickness was evaluated with radiographic Length Analyzer program. After acid etching with 37% phosphoric acid, one-bottle adhesive (Single Bond™, 3M/ESPE, USA) was applied following the manufacturer' s recommendation and cavities were incrementally filled with hybrid composite resin (Filtek Z-250™, 3M/ESPE, USA). Teeth were stored in distilled water for one day at room temperature, after then, they were finished and polished with Sof-Lex system. All specimens were embedded in acrylic resin and static load was applied to the specimens with a 3 ㎜ diameter stainless steel rod in an Universal testing machine and cross-head speed was 1 mm/min. Maximum load in case of fracture was recorded for each specimen. The data were statistically analyzed using one-way analysis of variance (ANOVA) and a Tukey test at the 95% confidence level.

접착형 2급 주조 금 인레이의 치은변연 접합도에 관한 연구

최희경,신동훈,홍찬의 大韓齒科保存學會 1994 Restorative Dentistry & Endodontics Vol.19 No.2

연령과 골소주 특성의 골량에 대한 연관관계

최동훈,송영한,윤영남,이완,이병도 대한구강악안면방사선학회 2006 Imaging Science in Dentistry Vol.36 No.2

Purpose : Bony strength is dependent on bone mass and bony structure. So this study was designed to investigate the relationship between the bone mass and bony trabecular characteristics. Subjects and Methods : Study subjects were 51 females (average age 68.6 years) and 20 males (average age 66.4 years). Bone mineral density (BMD, grams/cm²) of proximal femur was measured by a dual energy X-ray absorptiometry (DEXA). Regions of interest (ROIs) were selected from the digitized radiographs of proximal femur. A customized computer program processed morphologic operations (MO) of ROIs. 44 skeletal variables of MO were calculated from ROIs on the Ward’s triangle and greater trochanter of femur. WHO BMD classes were predicted by MO variables of the same ROI. Classification and Regression Tree analysis was used for calculating weighted kappa values, sensitivity and specificity of MO. Results : The discriminating factors of morphologic operation were branch point, branch point [per cm sq]. Age also played important role in distinguishing osteoporotic classes. The sensitivity of MO at Ward’s triangle and Greater Trochanter was 91.8%, 65.6%, respectively. The specificity of MO was 100% at Ward’s triangle and Greater Trochanter. Conclusion : Bony trabecular characteristics obtained using radiological bone morphometric analysis seem to be related to bone mass.

반복 작업 근로자들에서의 경견완장애에 관한 연구

최재욱,염용태,송동빈,박종태,장성훈,최정애 大韓産業醫學會 1996 대한직업환경의학회지 Vol.8 No.2

본 연구는 근골격계 질환중에서 대표적인 질환인 경견완장애를 대상으로 일부 제조업 및 전화교환수 근로자에서의 경견완장애의 유병실태 파악, 경견완장애의 정확한 분류 및 향후 진단기준의 개발에 필요한 기초적인 자료 수집에 목적을 두었다. 조사대상은 반복동작에 폭로되는 생산직 근로자 98명, 모전화국의 전화교환수 115명을 대상으로 근골격계 증상호소, 이학적 검사 및 신경학적검사와 기타 혈중 효소등의 임상검사 및 악력의 차이 등을 조사하였다. 조사대상 사업장 중 B사업장은 전자부품을 생산하는 사업장으로, 제품 조립라인의 작업형태는 주야 2교대 근무이며, 앉아서 하는 작업과 서서하는 작업이 혼재 되어있다. A사업장은 전화교환작업, 즉 컴퓨터단말기를 취급하는 작업으로 전원 앉아서 하는 작업이며, 주야 2교대 작업이다. 조사대상 집단의 일반적 특성은 다음과 같다. A사업장 근로자의 평균 연령은 37.9세, 평균 근속년수는 17년이며, B사업장은 평균 연령 37.7세, 평균 근속년수 10.4년이었다. A 사업장은 대상 근로자 115명이 전원 여자였으며, B사업장은 대상근로자 98명 중 남자 68(69.4%)명, 여자 30(30.6%)명이었다. 조사 결과는 다음과 같다. 사업장별 자각 증상 호소율은 A 사업장의 경우 경부 85.2%, 견관절 81.7%, 주관절 34.8%, 완관절 73.0%의 순으로 특히 경부 및 견관절, 완관절의 증상 호소율이 높았으며, 반면 B 사업장은 경부 51.2%, 견관절 56.1% 주관절 23.5%, 완관절 31.3%의 순이었다. 근속년수별 자각증상 호소율은 경부와 견관절의 자각증상 호소율이 40%이상으로 주관절 및 완관절의 지각 증상 호소율에 비해서 상대적으로 높았으며, 경부와 완관절은 근속년수가 증가함에 따라 자각증상에 호소율이 통계적으로 유의하게 증가하였다. A 사업장, B 사업장 모두 최소 22.8% 이상의 근로자(증상 경험자중)가 병원이나 약국을 방문하여 치료를 받았다고 응답하였으며, 사업장 간의 차이는 보이지 않았다. 조사 대상자 전원에게 신경학적 검사와 근전도 검사를 포함한 정밀건강진단을 실시하였다. 정밀건강진단 결과 A 사업장은 질병자가 10명(8.6%), 요주의자가 31명(26.9%), 재검자가 2(1.7%)이었으며, B 사업장은 질병자가 16(16.3%), 요주의자가 12명(12.2%), 재검자 2명(2.0%)이었다. 이러한 이상자의 질병별 유형은 긴장성 경부증후군에 해당하는 사람이 46명으로 이 중 질병자는 13명, 요주의자 30명 재검자 3명이었으며, 수근관증후군은 16명으로 질병자 3명, 요주의자 8명, 재검자 5명이었다. 기타 드퀘르뱅씨병은 5명으로 질병자 4명, 요주의자 1명이었으며, 외측상과염 3명, 이두근개건염 3명, 회전근개건염 3명, 내측상과염 2명, 경추디스트증후군이 5명 등이었다. 사업장별로는 A 사업장의 경우 긴장성경부증후군이 11명, 수근관증후군이 8명, 드퀘르뱅씨병 3명, 경추디스크증후군이 1명이었으며, B 사업장은 긴장성경부증후군이 35명, 수근관증후군이 8명, 드퀘르뱅씨병 2명등의 순이었다. 이러한 결과는 A 사업장의 경우 작업 조건이 의자에 앉아서 실시하는 컴퓨터 작업인데 반하여 B 작업장은 대부분 기립작업, 반복 조립으로 이러한 작업조건에 차이에 기인하는 것으로 판단된다. 경견완장애의 이상소견과 관련이 있는 성별, 연령, 빈도 위험도 점수 및 힘 위험도를 독립변수로 설정하여 다단계 로지스틱 회귀분석을 실시하였다. 경견완장애 이상소견에 통계적으로 유의한 영향을 미친 변수는 성별(p=0.0005), 연령(p=0.0093)이었으며, 힘위험도는 p값이 0.0567, 빈도위험도는 0.0983으로 유의하지 않았다. The purpose of this study is to investigate the current status of and to collect the basic informations of musculoskeletal diseases of upper extremities in manufacturing and telecommunication companies. The subjects were 213 workers, consisted of 98 manufacturing workers and 115 telephone operators. The musculoskeletal symptom survey, job safety analysis(JSA), and medical examinations including neurologic and nerve conduction velocity(NCV) test were conducted. All workers were women in company A, while the other composed of 68(69.4%) men and 30(30.6%) women. The results were as follows: 1. The rates of self-reporting symptoms in each company were 85.2% at the neck, 81.7% at the shoulder joint, 73.0% at the wrist joint and 34.8% at the elbow joint in company A, while 56.1% at the shoulder joint, 51.2% at the neck and 23.5% at the elbow joint in company B in order. 2. No relationship was observed between the work duration and symptom rate in company A, but the highest symptom rate was observed at the neck in 10-19 year work duration group, at the shoulder, elbow and wrist joint in 5-9 year work duration group in company B. 3. Over the 22.8% of total workers in this study having symptoms got medical treatment at the medical clinics or drug stores, but there was no statistical difference between both companies. 4. In company A, 16(13.9%) workers were classified as D category, 12(10.4%) workers as C category and 2(1.7%) workers as R category among 115 workers. And D category was 10(10.2%), C category 31(31.6%) and R category 4(4.0%) among 98 workers in company B. D category means disease category needed futher treatment, C category means disease category needed no treatment and R category means recheck category needed futher evaluation. 5. The types of musculoskeletal disorders including D, C, and R category were 46 cases(D 13, C 30, R 3)of tension neck syndrome (TNS), 16 cases(D 3, C 8, R 5) of carpal tunnel syndrome (CTS), 5 cases of De Quervain's disease, 3 cases of lateral epicondylitis, 3 cases of bicipital tendinitis, 3 cases of rotator cuff tendinitis, 2 cases of medical epicondylitis, and 5 cases of cervical disc syndrome. 6. In company A, the total cases of 11 TNS, 8 CTS, 3 De Quervain's disease, 3 lateral epicondylitis, 3 rotator cuff tendinitis and 1 cervical disc syndrome were diagnosed and so were total cases of 35 TNS, 8 CTS and 4 cervical disc syndrome in company B. 7. By stepwise multiple regression analysis with dichotomization of musculoskeletal disease, the following odds ratios were significantly high(p<0.05)-sex(2.707) and age (1.926).

佛敎의 唯識思想과 分析精神治療 理論의 比較 試論

崔焄東,李符永 大韓神經精神醫學會 1986 신경정신의학 Vol.25 No.1

While there are many articles on the Son(Zen) Buddhism ad its psychotherapeutic implications in the Eastern and western countries, Yogacara Buddhism was rarely studied in the aspect of psychotherapy. The authors reviewed Yogacara theories and compared them with the theories of analytical psychotherapy, hoping to find out the possibilities to incorporate the Yogacara theories into the theories of psychotherapy. ?? (Store-consciousness) is a consciousness which is the foundation of all acts of thought. The impressions of the whole of past experience are stored up in it. ?? is comparable to the psychological concept of the unconscious. Especially it is very similar to the Jungian unconsciousness which has both personal and collective components. The process of turning avidya(ignorance) into vidya(enlightenment) is comparable to the insight-oriented psychotherapy. Therefore Yogacara Buddism might provide the expanding knowledge and the scope of psychotherapy and the philosophical basis of psychotherapists.

양극산화와 절연파괴로 형성한 인산칼슘 함유 티타늄 산화피막의 특성

최원호,이용승,김동환,권용훈,배태성 大韓齒科器材學會 2003 대한치과재료학회지 Vol.30 No.1

This study was performed to investigate the surface properties of electrochemically oxidized pure titanium by anodic spark deposition technique. Titanium plates of 10×10×1 ㎜ were polished sequentially from # 300 to # 1,000 emery paper. They were ultrasonically washed in ethyl alcohol and acetone for 5 min and dried in a desiccator. Titanium plates and titanium screw implants were anodized in an electrolytic solution that was dissolved calcium and phosphate in water. The electrolytic voltage was set in the range of 190-340 V and the current density was 30 ㎃/㎠. The surface oxide film was characterized by X-ray deffractometer(XRD), scanning electron microscope(SEM) and X-ray photoemission spectroscopy(XPS). The main crystal structure of the titanium oxide was anatase type as analyzed with thin-film X-ray diffractometery. The diameter of micropores increased with increasing the spark forming voltage. The porous coatings showed the growth of cell structure and more compact texture with increasing the spark forming voltage. Microcracks were examined in the coating formed at voltage of 340 V. Ca/P ratio in coatings was increased with increasing the voltage.