주차원단위 산정 모형 개발에 관한 연구 -광주광역시 공동 주택 아파트를 대상으로-

권성대,고동봉,박제진,하태준,Kwon, Sung-Dae,Ko, Dong-Bong,Park, Je-Jin,Ha, Tae-Jun 대한토목학회 2014 대한토목학회논문집 Vol.34 No.2

도시의 급격한 팽창과 함께 주택부족 현상이 나타나게 되자, 정부는 주택부족 문제 해결을 위해 대규모 택지개발을 통하여 주택보급을 확대시켰다. 이러한 현상으로, 공동주택은 우리나라 전체 주택의 83% 수준을 유지하고 있고, 그 중 아파트가 차지하는 비중은 50%로 꾸준한 증가 추세를 보이고 있다. 이로 인해 아파트의 경우 입주민들의 승용차 보유 증가에 따른 아파트 단지 내 주차공간 부족문제 등 제반 주차 관련 문제가 발생하고 있다. 특히, 주차계획대수 수립 시 교통영향평가의 주차수요예측 중 전용면적을 고려한 주차원단위 산정 방법은 기존 계획보다 세대수는 증가하여도 전용면적이 작아지면 계획주차대수는 감소하는 것으로 나타나, 보다 현실적인 주차원단위 산정이 필요한 실정이다. 이에 본 연구는 공공주택 아파트를 대상으로 현실에 적합한 주차원단위를 산정하고자 한다. 현장조사 및 설문조사를 실시하고, 구득자료에 대한 분석을 수행함으로써, 기존 교통영향평가의 주차원단위 산정 문제점을 도출하였다. 또한, 주차수요예측에 영향을 미치는 요인 선정을 통해 주차원단위 산정모형을 개발하였다. 마지막으로 실제 조사된 아파트 주차원단위 자료를 통해 기존 교통영향평가의 주차원단위 산정과 본 연구에서 제시한 주차원단위 산정모형을 비교 분석하였다. 향후 본 연구에서 개발된 주차원단위 산정모형은 주차장법 기준 정립은 물론 보다 현실적인 주차수요예측 수행에 적극 활용될 수 있을 것으로 판단된다. The rapid expansion of cities led to the shortage of housing in urban areas. The government compensated for this shortage through large scale residential developments that increased the housing supply. The supply of condominium apartments remains above 83% of the entire housing supply, and the proportion of apartments are at a steady increase, at about 50%. Due to the increase, illegally parked cars resulting from the shortage of parking spaces within the apartment complex have become increasingly problematic as they block the transit of emergency vehicles, and heighten the tension among neighboring residents in obtaining a parking space. Especially, the future residents are considered to plan the parking based on the estimated demand for parking. However, the parking unit method utilized to estimate the parking demand accounts for the exclusive use of space, which is believed to be far from the parking demands in reality. The reason for this discrepancy is that, as the number of households decrease, and area of exclusive space is expanded, the planned parking increases. On the other hand, when the number of households increase, and the area of exclusive space is reduced, the planned parking decreases, thus methods to recalculate the parking units based on estimated parking demand is an urgent concern. To estimate the parking units based on condominium apartments, this study first examined the existing research literature, and appointed the field of investigation to collect the necessary data. In addition, field study data and surveys collected and analyzed, in order to identify the problems underlying parking units, and problems regarding the current traffic impact assessment parking unit calculation method were deduced. Through identifying the influential factors on parking demand estimates, and performing a factorial analysis based on the collected data, the variables were selected in relation to the parking demand estimates, to develop the parking unit estimate model. Finally, through comparing and verifying the existing traffic impact assessment parking unit estimate against the newly developed model using collected data, a far more realistic parking unite estimate was suggested, reflecting the characteristics of the residents. The parking unit estimate model developed in this study is anticipated to serve as the guidelines for future parking lot legislature, as wel as the basis to provide a more realistic estimate of parking demands based on the resident characteristics of an apartment complex.

NSIP와 BOOP의 고해상전산화단층촬영 소견과 비교

백상현,박재성,차장규,홍현숙,김대호,박성진,조준희,이혜경,최진수 순천향의학연구소 2003 Journal of Soonchunhyang Medical Science Vol.9 No.2

Purpose: BOOP and NSIP also share similar clinical features such as subacute flu-like illness, the finding of bronchoalveolar lavage, the result of pulmonary function test and more favourable outcome than usual interstitial pneumonia(UIP). The author try to compare the HRCT findings of NSIP with BOOP by pattern and distribution of diseases. Materials and Methods: HRCT findings of histopathologically proven NSIP(Group Ⅰ; 6, Group Ⅱ; 7, Group Ⅲ; 2) in 15 patients(5 male, 10 female, age range, 39-69 years; mean age, 53 years), BOOP in 15 patients(6 male, 9 female, age range, 26-76 years; mean age, 52 years) were reviewed retrospectively. Results: The common pattern of the two diseases was admixed consolidation, ground glass attenuation & reticular densities with/without architectural distortion(NSIP; 53.3%, BOOP; 46.7%). The main component of the pattern wan predominantly consolidation(NSIP; 46.7%, BOOP; 73.3%) and ground glass attenuation(NSIP; 40.0%, BOOP;20.0%). Architectural distotion was more provinent finding with NSIP(mild ; 3, moderate ; 4, severe; 2) compared with BOOP(mild; 7, moderate; 2, severe; 0). The predominant overall distribution was lower lung, peribronchovascular & peripheral lung field in both of the two entities(NSIP;73.3%, BOOP; 73.3%). Peribronchovascular involvement was more common with NSIP(100%) than BOOP(80%), whereas peripheral involvement was more common with BOOP(93.3%) than NSIP(80%). Conclusion: The HRCT findings of NSIP and BOOP were similar in pattern and distribution. But NIP manifested more frequently ground-glass attenuation, whereas BOOP showed more frequently consolidation. Architectural distortion was more severe with NSIP than BOOP. NSIP invoved more frequently peribronchovascular space and BOOP were more common in peripheral lung field.

Destructive Encephalopathy를 보인 Incontinentia Pigmenti 1예

한진규,최재철,박민규,박건우,은백린,정지태,이대희 대한신경과학회 1998 대한신경과학회지 Vol.16 No.5

다중 네트워크 아키텍처 지원을 위한 객체지향 게임 네트워크 엔진의 설계 및 구현

형대진,이재윤,박경환 동아대학교 정보기술연구소 2007 情報技術硏究所論文誌 Vol.14 No.2

Online game that based on network communication, use various type of communication and network architecture for each character and genre of game. In this paper, we investigated and analyzed communication types used in online games and, based on the results, introduced a method of developing an object-oriented network engine supporting various types of network architecture. The developed network engine not only supports the development of games using various types of communication applicable to online games but also is easily expandable because of its hierarchical structure based on the object-oriented concept. Moreover, since it can support dead reckoning make up for network latency problem, we use very usefully for development of game.

전립선 암종에서 Proliferating Cell Nuclear Antigen(PCNA) 표출에 대한 면역 조직화학적 연구

박대준,김대중,김창진 순천향의학연구소 1996 Journal of Soonchunhyang Medical Science Vol.2 No.2

The prostate carcinoma is one of the frequent malignant tumor in male. Recently its prevalence has been increased along with the increase of the aged. Most of this tumor arise in the aged of above 60 years. The prognostic factors of this tumor are clinical sgres, histologic grades and DNa ploidy. The proliferating cell nuclear antigen(PCNA) is nonhistone DNA polymerase delta auxiliary protein which molecular weight is 36,000. It increased in S-phase of cell cycle in peak stage and it is known to be important in the initiation of cell proliferation. This study was conducted to see the cellular proliferation rate of prostate carcinoma according the Gleason's histologic grade in comparison with benign brpstate hypertrophy(BPH) by immunohistochemistry of PCNA. The results were as follows; 1. The basal cells beneath the glandular epithelial cells showed strong and extensive positivity for PCNA in benign prostatehypertrophy. Some stromal smooth cells also showed strong positivity for PCNA. 2. The intensity score of PCNA positivity for BPH and prostate carcinoma were 236.9±25.4 and 227.4±23.9 respectively.(P>0.05) 3. The intensity score of PCNA positivity according to the Gleason's grade were 234.7±7.8, 263.5±5.4 and 223.6±6.5 for the groups of below 4, between 4 to 8, and above 8 respectively.(P>0.05) Above results showed that the basal cells of hypertrophic glands have high rate of cellular proliferation and there is no significant difference in cell proliferation between basal cells of hypertrophic glands and prostate carcinoma, which implies that PCNA is expressed highly in normal proliferating cells As materials examined were needle biopsied, fragmented tissue. Gleason's histologic grading could be incorrect, and there were no difference of PCNA expression between the Gleason's grading group. Further studies with sufficient materials should be done for the relationship between Gleason's histologic grades and PCNA expression.

크리깅 기법을 이용한 마이크로 믹서의 최적 설계

박재용,김상락,이원구,유진식,김용대,한석영,맹주성 한국공작기계학회 2007 한국공작기계학회 추계학술대회논문집 Vol.2007 No.-

An active micro-mixer, which was composed of an oscillating micro-stirrer in the microchannel to provide rapid, effective mixing at high flow rates was analyzed. The effects of molecular diffusion and disturbance by the stirrer were considered with regard to two types of mixer models: the simple straight microchannel and microchannel with an oscillating stirrer. Two types of mixer models were studied by analyzing mixing behaviors such as their interactionafter the stirrer. The mixing was calculated by Lattice Boltzmann methods using the D2Q9 model. In this study, the time-averaged mixing index formula was used to estimate the mixing performance of time-dependent flow. The mixing indices of the two models were compared. From the results, it was found that the mixer with an oscillating stirrer was much more enhanced and stabilized. Therefore, an optimum design for a dynamic micro-mixer with an oscillating stirrer was performed using Kriging method in order to obtain a optimum solution. The design parameters were established as the frequency, the length and the angle of the stirrer, and the optimal values were determined to be 2.0932, 0.8D and ± 75°, respectively. It was found that the mixing index of the optimal design increased by 88.47% compared with that of the original design.

순차적 크리깅기법을 이용한 미소혼합기의 최적화

박재용,유진식,황승민,임민규,오영규,김용대,한석영,맹주성 한국공작기계학회 2008 한국공작기계학회 추계학술대회논문집 Vol.2008 No.-

An active micro-mixer, which is composed of an oscillating micro-stirrer in the micro-channel to provide effective mixing was optimized. The effects of molecular diffusion and disturbance by the stirrer were considered with regard to two types of mixer models: the simple straight micro-channel and micro-channel with an oscillating stirrer. Two types of mixer models were studied by analyzing mixing behaviors such as their interaction after the stirrer. The mixing was calculated by Lattice Boltzmann methods using the D2Q9 model. In this study, the time-averaged mixing index formula was used to estimate the mixing performance of time-dependent flow. The mixing indices of the two models were compared. From the results, it was found that the mixer with an oscillating stirrer was much more enhanced' and stabilized. Therefore, an approximate optimization of an active micro-mixer with an oscillating stirrer was performed using Kriging method with OLHD (Optimal Latin Hypercube Design) in order to determine the optimal design variables. The design parameters were established as the frequency, the length and the angle of the stirrer. The optimal values were obtained as 1.5754, 0.803D and ±45°, respectively. It was found that the mixing index of the optimal design increased by 83.36% compared with that of the original design.

수소화붕소 리튬을 이용한 카르복시산의 환원

朴昞洙,車震淳,金鍾大 嶺南大學校附設 基礎科學硏究所 1981 基礎科學硏究 Vol.1 No.-

Carboxylic acids are readily reduced to the corresponding alcohols with borane-THF solution (or diborane) at 0°, whereas with lithium borohydride in THF solution the rate of reaction is very sluggish even at room temperature. In this study the possibility for the direct reduction of carboxylic acids to the corresponding alcohols by lithium borohydirde itself have been investigated, forming the reactive acyloxyborane in situ in the reaction mixture of acyloxyborohydride with methyl iodide. Thus, aliphatic acids were reduced rapidly to the alcohols, however, aromatic acid was reduced in a slow rate at room temperature. And in the reaction of α,β-unsaturated carboxylic acids with this reducing system the rduction on carboxylic group and the hydroboration on double bond were occurred competitively. Amino acid and dicarboxylic acid were reduced cleanly to the amino alcohol and diol, respectively. However, amino dicarboxylic acid was inert to this reducing system.

배기 가스 정화용 금속 담체의 브레이징시 제조 변수의 영향

朴大鎭,金容奭 弘益大學校 科學技術硏究所 2000 科學技術硏究論文集 Vol.11 No.-

The effects of brazing temperature and time, and the thickness of filler metal on the joint microstructure of metallic catalytic convertor were investigated. Especially, the formation of brittle eutectic structure was examined. In general, it was found that processing conditions which promote the diffusion of Si in the filler metal reduce the formation of the eutectic structure. The condition includes the higher bonding temperature, longer brazing time, thinner filler metal. The higher bonding temperature and longer brazing time, however, led to extensive dissolution and degradation of the catalytic material. Thus, it was found that the brazing conditions using thinner filler metal at moderate brazing temperature and time are most effective in preventing the formation of the brittle eutectic structure in the brazed joint of the catalytic convertor.

음향방출과 미세역학적시험법을 이용한 단일섬유강화 에폭시 복합재료의 비파괴적 섬유파단 위치표정 및 계면물성 평가

박종민,공진우,김대식,윤동진 한국비파괴검사학회 2003 한국비파괴검사학회지 Vol.23 No.5

섬유파단은 복합재료의 기계적물성을 규명하는 가장 중요한 현상 중 하나이며, 섬유파단 위치는 기지재료의 물성과 섬유표면 처리에 따라 광학현미경에 의한 방법 뿐만 아니라 음향방출법을 이용하여 확인 및 상호비교 할 수 있다. 두 개의 음향방출 센서를 단일섬유강학 에폭시 복합재료 시편 표면에 부착 시켜 연속적인 섬유파단 신호를 변형률과 측정 시간에 따라 감지하였으며, 계면전단강도는 단일섬유강화 복합재료 시험에서 광학적 방법과 음향방출법을 이용하여 측정하였다. 탄소섬유의 파단 수는 섬유표면을 전기증착으로 처리한 경우가 많았으며, 광학적인 관찰 시에 좀 더 많게 나타났다. 하지만 음향방출법과 광학적 방법에 의한 섬유파단의 위치는 작은 오차범위 내에서 상호 잘 일치하는 결과를 얻을 수 있었다. 음향방출법에 의한 섬유파단 위치표정과 파형분석은 투명, 반투명 및 불투명한 복합재료의 계면물성을 비파괴적으로 측정하기 위한 유용한 방법으로 사료된다. Fiber fracture is one of the dominant failure phenomena affecting the total mechanical performance of the composites. fiber fracture locations were measured through the conventional optical microscope and the nondestructive acoustic emission (AE) technique and then were compared together as a function of the epoxy matrix modulus and the fiber surface treatment by the electrodeposition method (ED). Interfacial shear strength (IFSS) was measured using tensile fragmentation test in combination of AE method. ED treatment of the fiber surface enlarged the number of fiber fracture locations in comparison to the untreated case. The number of fiber fracture events measured by the AE method was less than optically obtained one. However, fiber fracture locations determined by AE detection corresponded with those by optical observation with small errors. The source location of fiber breaks by AE analysis could be a nondestructive, valuable method to measure interfacial shear strength (IFSS) of matrix in non-, semi- and/or transparent polymer composites