http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
The prediction of the tooth size in the mixed dentition for Korean
Moon, Sung-Hwan,Kim, Seong-Oh,Yu, Hyung-Seong,Choi, Byung-Jai,Choi, Hyung-Jun,Lee, Jae-Ho 大韓小兒齒科學會 2006 大韓小兒齒科學會誌 Vol.33 No.2
이번 연구의 목적은 혼합치열기 아동에서 미맹출된 견치와 소구치의 크기를 예측하는데 있어서 한국인에 맞는 방정식을 만들기 위함이다. 미맹출 치아의 크기를 예측하는 것은 혼합치열기 교정 진단과 치료계획 수립에 있어서 매우 중요하다. 미맹출된 견치와 소구치 크기를 예측하는 방법은 몇가지가 있지만 그중에서도 가장 흔하게 쓰이는 것이 모이어의 예측표와 다나카와 존스턴의 방정식이 있다. 하지만 그것들은 백인을 위해서 제작된 것이고 치아 크기는 인종에 따라서 다르다고 알려져 있다. 이번 연구에서는 치아크기를 측정하여 하악 영구 절치의 크기 합과 견치 및 소구치의 크기 합 사이의 상관관계를 구하고 회귀방정식을 이용해서 한국인에 맞는 예측표를 만들었다. 연세대학교 치과대학에 재학중인 178명의 한국 학생(남 108명, 여 70명, 평균연령 21.63)을 대상으로 실험하였다. 영구치의 근원심 폭경을 석고모형상에서 calipers를 이용해서 측정하였다. 성별간의 치아 크기는 차이가 있었다(p<0.05). Correlation coefficient는 0.57에서 0.64의 범위였고, standard errors of the estimates 는 여성에서 0.6으로써 남성보다 우수하였다. r^(2)값은 0.27에서 0.41의 범위를 나타내었다. Estimating the size of unerupted teeth is an essential aspect of orthodontic diagnosis and treatment planning in the mixed dentition. Several methods were introduced and used for the prediction. The most common methods among these would be Moyers probability chart and Tanaka and Johnston equations. These are currently used widely, but they were developed for Caucasians. Because there are clear racial differences in teeth size, the objectives of this study were to produce correlation coefficients between the combined mesiodistal widths of the permanent mandibular incisors and those of the canines and premolars for each quadrant, and prediction tables with regression equations, specifically for Korean. 178 young adults (70 women, 108 men, mean age 21.63 years) were selected from the College of Dentistry, Yonsei University, Seoul, Korea. The mesiodistal crown diameters of the permanent teeth were measured with calipers. Significant sexual dimorphism was found in tooth sizes. The correlation coefficients between the total mesiodistal width of the mandibular permanent incisors and those of the maxillary and mandibular canines and premolars were found to be between 0.52 and 0.64. The standard error of the estimatation was better (0.60) for women and the r^(2) values ranged from 0.27 to 0.41 for both sexes, Prediction tables were prepared for Korean. This study showed larger canine and premolar diameters than Tanaka and Johnston's and Moyers' studies which might be due to the racial differences. Further investigations with a larger sample size will be needed for more representative data on the Korean population.
Improved DCT-Based Image Coding and Decoding Methods For Low-Bit Rate Applications
Jung, Sung-Hwan,Sanjit K. Mitra 國立 昌原大學校 基礎科學硏究所 1994 基礎科學硏究所論文集 Vol.6 No.-
The discrete cosine transform (DCT) is well known for highly efficient coding performance, and it is widely used in many image compression applications. However, in low-bit rate coding, it produces undesirable block artifacts that are visually not pleasing. In addition, in many applications, faster computation and easier VLSI implementation of DCT coefficients are also important issues. The removal of the block artifacts and faster DCT computation are therefore of practical interest. In this paper, we outline a modified DCT computation scheme that provides a simple efficient solution to the reduction of the block artifacts while achieving faster computation. We also derive a similar solution for the efficient computation of the inverse DCT. We have applied the new approach for the low-bit rate coding and decoding of images. Initial simulation results on real images have verified the improved performance obtained using the proposed method over the standard JPEG method.
[논문]용접부의 피로 파손모드 평가에 대한 구조응력기법의 적용에 관한 연구
강성원,김명현,김정환 釜山大學校生産技術硏究所 2006 生産技術硏究所論文集 Vol.65 No.-
반복 하중을 받게 되는 하중전달형의 필릿 용접이음에서는 용접 토우부 뿐만 아니라 용입 부족부 선단에서도 응력집중을 일으키고 피로균열이 발생/ 전파하는 경우가 있다. 특히/ 용접 루트부에서 발생한 균열은 육안관찰이 불가능하고 초음파 탐상등에 의한 비파괴 검사에 의해서도 검출이 곤란한 경우가 많다. 이것은 중대한 손상을 일으키기 까지 방치되는 경우가 많기 때문에 용접 루트부에서 발생하는 균열에 대한 연구는 현재 활발히 진행되고 있다. 본 연구에서는 최근 유한요소 해석시 요소의 크기에 둔감하다고 알려진 구조응력 기법을 이용하여 용입 부족부를 가지는 하중전달형 필릿 용접부의 피로 파손모드를 평가하였다. 용접부 다리길이의 변화에 따른 사례 연구를 통하여 용접 루트부의 파손을 피할 수 있는 용접부 시공기준에 관한 연구를 수행하였으며 이에 대한 구조응력 기법의 적용 가능성을 검토하였다.
성낙문,이환승 한국안전교육학회 2002 한국안전교육학회지 Vol.5 No.2
In conducting traffic safety programs, it is very important to identify hazardous sites in appropriate manner. Many experts in the traffic safety fields have performed researches to choose hazardous sites. The method of identifying hazardous sites which prevails in Korea is based on the traffic crash frequencies, which is inevitable because of insufficient database associated with the traffic crash data. This paper analyzed problem related to the method based on accident frequencies, and established an alternative which is named as frequency-quality control method, to make up for the weak points in the current method. As a result of test, the proposed method was reliable enough to be applied in the traffic safety program.
영상의학 진단검사 서비스 이용자의 만족도에 영향을 미치는 요인
신성규,유병철,이용환 고신대학교 의과대학 2009 고신대학교 의과대학 학술지 Vol.24 No.1
Background : To assess the influencing factors of patients satisfaction on service of diagnostic radiology and to recommend for the improving method of patients satisfaction on service of diagnostic radiology. Methods : We conducted a SERVQUAL questionnaire survey during the period from January 2008 till August 2008. The data was collected from questionnaires filled out by 289 patients visiting at 4 tertiary and 5 secondary hospitals located in Busan Metropolis City. Collected data were analyzed descriptive analysis, t-test, one-way ANOVA and multiple regression analysis using SAS Win(ver 9.0k) program. Results : The mean score of patient's satisfaction on diagnostic radiology was -0.01±0.50 and empathy as subcategory of SERVQUAL was only positive satisfaction(0.10±0.72). Patient's satisfaction on diagnostic radiology was high in admission experienced group, operation experienced group and medical administration satisfaction group, respectively. Patient's satisfaction on diagnostic radiology was influenced by appointment of diagnostic radiology examination and satisfaction of medical administration. Conclusion : This study show that patient of diagnostic radiology experienced dissatisfaction and the influencing factors of patient's satisfaction on diagnostic radiology were appointment and satisfaction of medical administration. In order to improve patient's satisfaction of diagnostic radiology, more exact appointment system and advanced medical administration support were needed in the hospital organization.