서평 : 자료소개 ; 박덕일. 박덕일 역사(朴德逸 歷史)

박정규 ( Jung Gyu Park ) 현대기독교역사연구소 2006 성결교회와 신학 Vol.16 No.-

주변난류유동이 단일액적의 증발에 미치는 영향에 대한 수치적 연구

박정규,Park, Jung Kyu 대한기계학회 1995 대한기계학회논문집 Vol.19 No.10

This investigation reports on the study of the ambient turbulent effects on the droplet vaporization in the fuel spray combustion. For tractability, this discussion considers a single droplet in an infinite turbulent flow. In this numerical study, the low-Reynolds-number version of k-.epsilon. turbulence model was used to represent the turbulence effects. The set of two-dimensional conservation equations which describe the transport phenomena in turbulent flow using the mean flow quantities including the droplet internal laminar motion, are solved numerically with the finite difference procedure of Patankar(SIMPLER). The evaluation of the computational model is provided by two limiting cases: turbulent flow over the solid sphere and the laminar flow over a liquid drop. The results show that the turbulence effects are noticeable for the vaporization at high turbulence intensity (10-50%) which is encountered in a typical spray. The magnitude of turbulence effects mainly depends on the turbulent intensity. These effects are not sensitive to the Reynolds number in the range of 50 to 200, ambient temperature in the range of 700 to 1000.deg. K and the volatility.

공압 매니퓰레이터의 강인 힘제어

박정규,노리츠구토시로,Park, Jeong-Gyu,Noritsugu, Toshiro 대한기계학회 1996 大韓機械學會論文集A Vol.20 No.2

In this paper, a compensation method of disturbance using a disturbance observer is proposed for a force control of a pneumatic robot manipulator. The generated torque by a pneumatic actuator can be estimated based on the pressure signals. The inner torque control system is constructed by feeding back the generated torque to improve the dynamic characteristics of the actuator. In order to reduce the influence of disturbances comprising friction torque, parameter variations of plant and environment and so on, the reaction torque control system is constructed with a disturbance observer which estimates the disturbances based on the reference input to the inner torque control system and the reaction torque sensed with a forced sensor. From some simulations and experiments, it is confirmed that the proposed control system is effective to improve the robustness for the friction torque and the parameter change of object in the force control of a pneumatic robot manupulator.

공압매니퓰레이터의 임피던스제어를 위한 마찰보상법

박정규,Park, Jung-Gyu 대한기계학회 1997 大韓機械學會論文集A Vol.21 No.2

In this paper, a friction compensation method using a disturbance observer is proposed for an impedance control of pneumatic manipulator. It is assumed that the generated torque by a pneumatic actuator can be estimated based on the pressure signals and the discharge volume. In order to improve the dynamic characteristics of the pneumatic actuator driven by meter out method, we construct the inner torque control system by feeding back the generated torque. In order to reduce the influence of disturbances comprising friction torque and parameter variations of plant, the impedance control system is constructed with a disturbance observer which estimates the disturbances based on the generated torque of pneumatic actuator, the angular velocity and the reaction torque. From some experiments, it is confirmed that the proposed control system is effective to improve the robustness for the friction torque in the impedance control of a pneumatic manipulator.

출판저널 칼럼

박정규,Park, Jeong-Gyu 대한출판문화협회 1998 출판저널 Vol.238 No.-

TPA로 분화된 U937 세포에서 사람 세포거대바이러스에 의한 c-jun Promoter 활성도의 변화

박정규,김대중,김진희,한태희,황응수,최명식,국윤호,최성배,차창룡,Park, Chung-Gyu,Kim, Dae-Joong,Kim, Jin-Hee,Han, Tae-Hee,Hwan, Eung-Soo,Choi, Myong-Sik,Kook, Yoon-Hoh,Choi, Sung-Bae,Cha, Chang-Yong 대한미생물학회 1999 Journal of Bacteriology and Virology Vol.28 No.1

Transient transfection assay has been done to evaluate whether the c-jun activation would be prerequisite to the induction of permissiveness against human cytomegalovirus using in vitro cell model in which U937 has been induced to express CD11b and CD14 to become potential monocyte/macrophage cells by TPA treatment. U937 cells were treated with $10\;{\mu}M$, $50\;{\mu}M$ or $100\;{\mu}M$ of TPA. The cell morphology change was observed and the expression of the CD11b and CD14 was confirmed by FACS. Differentiated cells were transfected with pJLuc reporter vector which contained the wild type murine c-jun promoter spanning the SP1, CTF, ATF/CREB and MEF-2 binding sites upstream of the firefly luciferase gene. After 48 hrs of transfection, the cells were infected with HCMV Towne strain and the luciferase activity was assessed at 1 hand 4 h pi. The transfection assay showed no activation of the c-jun promoter at 1 h pi, instead, it showed 2 times increase of the its activity at 4 h pi. There was no difference of the c-jun promoter activation between TPA treated and untreated U937 cells, implying that c-jun activation might not be prerequisite for allowing cells to be premissive to HCMV, although HCMV infection itself could activate c-jun promoter.

F-18 FDG PET/MRI와 PET/CT 전신 영상에서 VOI를 이용한 정상부위의 $SUV_{LBM}$-최대치에 의한 영상평가

박정규,김성규,조인호,공은정,박명환,Park, Jeong-Kyu,Kim, Sung-Kyu,Cho, Ihn-Ho,Kong, Eun-Jung,Park, Meyong-Hwan 한국의학물리학회 2013 의학물리 Vol.24 No.1

본 연구의 목적은 26명의 건강한 검진자들을 대상으로 PET/CT와 PET/MRI의 전신 영상에서 조기 정밀/ 진단 수준을 향상하고자 관심부피를 이용하여 정상부위의 $SUV_{LBM}$-최대치를 이용하여 PET/CT와 PET/MRI를 조영제 사용 유무와 관계없이 동시 평가할 수 있는 데이터를 구축하고자 하였다. 전신 F-18 FDG PET/CT와 전신 F-18 FDG PET/MRI의 정상부위의 VOI를 이용한 $SUV_{LBM}$-최대치평가는 PET/CT를 기준으로 PET/MRI의 영상은 매우 유의한 차이를 보였다(p<0.0001). 그러나 통계학적으로 높은 상관관계를 가진다(R>0.8). PET/MRI의 $SUV_{LBM}$ 평가 시 26.3% 감소하여 판단할 것과 조영제를 사용할 경우는 29.3% 감소하여 판단할 것으로 생각한다. PET/CT와 PET/MRI의 모든 영상의 판독에서는 $SUV_{LBM}$-최대치를 사용하는 것이 편리성과 효율성을 고려하여 임상의나 연구자들에게 많은 도움이 되리라 판단된다. The purpose of this research is to compare and analyze $SUV_{LBM}$-maximum of normal regions using VOI (the volume of interest) in order to enhance the diagnostic level in whole body images of PET/CT and PET/MRI for 26 health check-up participants. In particular, we try to set up $SUV_{LBM}$-maximum data that can be used in synchronous evaluation for PET/CT and PET/MRI without contrast media. The evaluation of $SUV_{LBM}$-maximum for normal regions of whole body PET/CT and whole body PET/MRI shows that the image of PET/MRI differs very significantly from the reference image of PET/CT (p<0.0001). However, they exhibit high correlations in view of statistics (R>0.8). From this research, we suggest that the decision in the evaluation of $SUV_{LBM}$-maximum for PET/MRI should be made with the reduction of about 26.3%, while one should decide with the reduction of about 29.3% when the contrast media is used. It is helpful to interpret all image of PET/CT and PET/MRI using $SUV_{LBM}$-maximum for convenience and efficiency.

PDP용 수직형 구조의 근접 노광장치 개발

박정규,정수화,이항부,Park, Jeong-Gyu,Jeong, Su-Hwa,Lee, Hang-Bu 대한기계학회 2000 大韓機械學會論文集A Vol.24 No.9

In this paper, we developed the proximity exposure system with the vertical structure of glass and mask stage to minimize the mask's warp caused by the pull of gravity. This system, which canirradiate the ultra violet through 1440 H 850 $\textrm{mm}^2$ and 1330X 1015 $\textrm{mm}^2$ exposure area, has the followingcharacteristics. The glass stage can be inclined by 80 degrees at vertical structure to load substrate withsafety on it. When the glass stage is the vertical state, the gap control, alignment control and exposureof ultra violet are executed. So, it enhances the pattern uniformity by minimizing the mask's warp. Theglass stage can also control the gap between the mask and the substrate by the coarse and fine motioncontrol. The mask stage can adjust the posture of photomask to the position of substrate by imageprecessing method. The galss stage for the gap control and the mask stage for the alignment aredesigned independently for each function.

TESS 보고 양식을 활용한 대전 지역의 중독 양상

박정규,정성필,김승환,유인술,박준석,유진현,양영모,정시경,Park Jung Kyoo,Jeong Sung Phil,Kim Seung Hwan,Yoo In Sui,Park Joon Seok,Yoo Jin Hyun,Yang Yeong Mo,Jeong Si Kyung 대한임상독성학회 2004 대한임상독성학회지 Vol.2 No.1

Purpose: A number of reports about the intoxicated patients have been introduced, but there were few multicenter studies. The purpose of this study was to analyse the patients with toxic exposure in the Daejon province. Methods: The patients who were presented to the four academic emergency departments in Daejon with toxic exposure were enrolled from January to June 2003. The collected variables were according to the form which modified from the Toxic Exposure Surveillance System (TESS) of the American Association of Poison Control Centers. Results: The toxic exposure patients were 362 cases which is $0.78\%$ of total patients presented to the emergency department. The most common exposure site was home ($84\%$). Eighteen percent of cases were exposed by two or more substances. The most common substance was the pesticides ($34.8\%$), and the non-prescription drugs ($32.6\%$) was followed. The suicidal attempt was the top reason for exposure ($67.1\%$). The route of exposure other than ingestion was $3.6\%$. Although the most patients left the hospital within a day, the average treatment period was 4.4 days. Thirty-one patients ($8.6\%$) were expired, and 22 among them were exposed to the paraquat. Conclusion: We reported the current status of toxic exposure in Daejon province by modified TESS style.

저전압용 $SrTiO_3$ : Al, Pr 적색 형광체 합성 및 발광특성

박정규,류호진,박희동,최승철,Park, Jeong-Gyu,Ryu, Ho-Jin,Park, Hui-Dong,Choi, Seung-Cheol 한국재료학회 1998 한국재료학회지 Vol.8 No.7

고상반응법으로 $SrTiO_3$ : AI, Pr 적색 형광체를 합성하였다. PL 스펙트럼과 CL 스펙트럼의 발광 강도를 소결 온도와 소결 시간등의 형광체의 제조 변수에 대하여 최적화 하였다. 열처리한 분말은 XRD 분석 결과 페로브스카이트구조를 보였고, PSD 분석결과 평균입자크기는 약 3~5$\mu\textrm{m}$이었다. 또한 분말의 주사 전자 현미경 사진에 의한면 구형을 갖는잘 결정화된 입자들이 관찰되었다. 특히, 본 연구에서 합성된 분말의 특성은 상용화된 $Y_2O_3: Eu 형광체 보다 저전압에서의 CL 특성이 더 우수하였으며, 이 형광체는 저전압에서 구동하는 FED에 응용할 가능성이 높을 것으로 생각된다. The $SrTi0_3$:Al, Pr red phosphors were prepared by solid state reaction method. Phosphor preparation parameters such as sintering temperature and time were optimized for the photoluminescence(PU intensity and the cathodoluminescence(CL) intensity. Powder samples showed the characteristic X-ray diffraction patterns of the perovskite structure and the average particle size of 3~5/$\mu\textrm{m}$ for particle size distribution(PSD) analysis. Also, scanning electron microscopy for the powder samples showed that the particles are reasonably crystallized with spherical shape. Especially, higher low voltage CL properties of $SrTi0_3$:Al, Pr phosphors than commercial $Y_2O_3$:Eu phosphors are expected to be applied for a low voltage field emission display(FED).