http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
오세천,이창용,장헌주,전현철,이해평,김희택 한국공업화학회 2003 공업화학 Vol.14 No.8
가열 속도 및 반응 온도 그리고 혼합 비율에 따른 목재와 폴리프로펠렌 혼합물의 열분해 특성에 관한 연구를 TG와 GC-MS를 이용하여 수행하였다. 반응 온도 및 가열 속도가 증가할수록 액상 생성물은 감소하였으며 기상 생성물은 증가하였다. 폴리프로필렌과 목재의 혼합 열분해에 대한 액상 생성물의 수율이 최대가 되는 반응 온도는 500~600℃이었으며 반응온도 및 가열속도가 증가할수록 목재로부터의 이산화탄소 및 일산화탄소의 생성 수율은 감소하였다. The pyrolysis characteristics of wood and polypropylene(PP) mixtures have been studied by thermogravimetry(TG) and gas chromato-graph-mass spectrometry (GC-MS) with various heating rates, reaction temperatures and mixing ratios. As the reaction temperatures and heating rates increase, the yield of liquid products decreases, whereas that of gaseous products increases. The co-pyrolysis reaction temperature of wood and polypropylene mixtures for the maximum yield of liquids was 500∼600 ℃. The yields of carbon dioxide and carbon monoxide decrease as the reaction temperatures and heating rates increase.
자동차 크랭크 軸用 鋼材의 棒對棒 同種材 摩擦熔接의 疲勞强度 特性 및 AE 評價
오세규(Sea-Kyoo Oh),양형태(Hyung-Tae Yang),김헌경(Hun-Kyoung Kim) 한국해양공학회 1999 韓國海洋工學會誌 Vol.13 No.2
Nowadays, the crank shaft for motor vehicle has become essential as the important component. The machining precision was asked for manufacturing the shaft. They could be unstable in the quality by the conventional arc welding.<br/> Both in-process quality control and high reliability of the weld are the major concerns in applying friction welding to the economical and qualified mass-production. No reliable nondestructive monitoring method is avaliable at present to determine the real-time evaluation of automatic production quality control for bar-to-bar friction welding of the crank shaft of O.D. 24㎜ for motor vehicle.<br/> This paper, so that, presents the experimental examinations and statistical quantitative analysis of the correlation between the cumulative counts of acoustic emission(AE) during plastic deformation periods of the welding and the tensile strength and other properties of the bar-to-bar welded joints of O.D. 24㎜ shaft as well as the various welding variables, as a new approach which attempts finally to develop real-time quality monitoring system for friction welding, resulting in practical possiblility of real-time quality control more than 100% joint efficiency showing good weld with no micro structural defects.
킬른 열분해 반응기로부터 생성된 고분자량 성분의 열적분해
오세천(Oh, Sea-Cheon),류재훈(Ryu, Jae-Hun),곽현(Kwak, Hyun),배성렬(Bae, Seong-Youl),이경환(Lee, Kyung-Hwan),유덕명(Liu, Daivd) 한국신재생에너지학회 2007 한국신재생에너지학회 학술대회논문집 Vol.2007 No.11
킬른형 열분해 반응기를 이용하여 혼합폐플라스틱의 열분해로부터 얻어진 고분자성분의 열적분해 특성에 관한 연구를 TGA와 GC-MS를 이용하여 수행하였다. 열적분해의 속도론적 연구는 10{sim}50?C/min 사이의 여러 가열속도에서 비등온 질량감소 기술을 이용하여 수행하였으며 활성화 에너지 및 반응 차수와 같은 속도 상수들에 대한 정보를 얻기 위하여 문헌에 제시된 여러 가지의 속도론 해석방법을 이용하여 질량감소곡선 및 그 미분 값을 해석하였다. 또한 회분식 열분해 반응기를 이용하여 반응온도에 따른 액상 생성물의 수율변화를 고찰하였으며 GC-MS를 이용하여 액상 생성물의 반응온도 증가에 따른 특성연구를 수행하였다.
컨테이너 크레인을 위한 레일 클램프 유압 시스템의 3D 모델링
소명옥(Myung-Ok So),오세준(Sea-Jun Oh),권석경(Seok-Kyung Kwon),김다애(Da-Ae Kim),김진희(Jin-Hee Kim),이선호(Sun-Ho Lee),이정훈(Jeong-Hun Lee),천정성(Jeong-Sung cheon),황태웅(Tae-Woong Hwang),소건백(Gun-Baek So),강선이(Sun-Yi Kang),윤석 한국마린엔지니어링학회 2007 한국마린엔지니어링학회 학술대회 논문집 Vol.2007 No.-
본 연구는 컨테이너 크레인의 레일 클램프 유압 시스템을 3D로 모델링한고, 키보드나 마우스의 간단한 조작으로 분해조립을 실습할 수 있으며 실제 장비와 거의 유사하게 작동할 수 있는 컨테이너 크레인용 레일 클램프 유압 시뮬레이터를 개발하기 위한 기초에 목표를 둔다.
초임계 이산화탄소를 이용한 Nannochloropsis sp. 미세조류로부터 바이오디젤 생산용 지질의 추출
최경석 ( Kyung Seok Choi ),류재훈 ( Jae Hun Ryu ),박동준 ( Dong Jun Park ),오세천 ( Sea Cheon Oh ),곽현 ( Hyun Kwak ) 한국화학공학회 2015 Korean Chemical Engineering Research(HWAHAK KONGHA Vol.53 No.2
본 연구에서는 미세조류인 Nannochloropsis sp.로부터 바이오디젤 생산용 지질을 얻기 위하여 유기용매 및 초임계이산화탄소(SC-CO2)를 이용하여 추출을 수행하였다. SC-CO2 추출법으로 얻은 지질의 지방산메틸에스테르 함량은58.31%로 높았으며, Bligh-Dyer 추출법은 18.0 wt.%의 가장 높은 조지방 수율을 나타내었다. SC-CO2 추출법에 극성을 높이기 위해 공용매로서 methanol을 사용한 결과, 조지방 수율 12.5 wt.%, 지방산메틸에스테르 함량 56.32%, 지방산메틸에스테르 수율 7.04 wt.%였으며, SC-CO2 만을 이용하는 추출 방법에 비하여 추출 시간을 2시간에서 30분으로 단축시킬 수 있었다. 따라서 미세조류에서 지질을 추출하는데 기존의 유기용매 추출법과 비교하여 SC-CO2 추출법이 친환경적이며, 효율적인 방법임을 확인하였다. In this paper, microalgae lipid extractions were performed using conventional organic solvent and supercritical carbon dioxide (SC-CO2) for biodiesel-convertible lipid fractions. The highest levels (58.31%) of fatty acid methyl ester (FAME) content in the lipid extracted by SC-CO2 was obtained, and 18.0 wt.% crude lipid yield was achieved for Bligh-Dyer method. In the SC-CO2 extraction, methanol as a co-solvent was applied to increase the polarity of extract. The experimental results indicated that crude lipid yield, FAME content and yield extracted by combination of SC-CO2 with methanol were 12.5 wt.%, 56.32% and 7.04 wt.%, respectively, and this method could reduce the extraction time from 2 hour to 30 min when compared to SC-CO2 extraction. Therefore, SC-CO2 extraction is proven to be an environmentally- friendly and an effective method for lipid extraction from microalgae.