http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
김태현(Taehyoun Kim),김광영(Kwangyoung Kim),김형수(Hyungsoo Kim),성민영(Minyoung Sung),장래혁(Naehyuck Chang),신현식(Heonshik Shin) 한국정보과학회 2001 정보과학회 컴퓨팅의 실제 논문지 Vol.7 No.3
자바는 플랫폼 독립성, 높은 보안성, 멀티쓰레드 지원 등의 다양한 장점을 가지고 있어서 내장형 시스템을 위한 실행 환경으로 기대를 모으고 있다. 널리 쓰이고 있는 자바 수행 환경 중 하나인 Sun 사의 퍼스널자바 (PersonalJava™)는 다양한 GUI를 쉽게 생성할 수 있도록 Truffle이라는 AWT 구조를 제공하고 있어서 셋톱박스나 PDA 등의 다양한 내장형 시스템에 활발히 이식되고 있다. 기본적으로 Truffle은 기존의 마이크로소프트 Win32 API나 X 윈도우 API를 기반으로 하고 있다. 그러나, 이러한 윈도우 관리기들은 많은 양의 디스크나 메모리 공간을 요구하므로 시스템 자원이 한정된 내장형 시스템에는 적합하지 않다. 본 연구에서는 내장형 시스템의 요구조건을 만족시킬 수 있도록 내장형 리눅스 상에서 경량 윈도우 관리기인 마이크로윈도우즈(Microwindows)를 플랫폼 그래픽 시스템으로 채택하고 퍼스널자바 AWT API를 구현하였다. 마이크로윈도우즈(Microwindows)는 경량이면서도 기존의 윈도우 관리기들과 유사한 기능을 제공하며, 별도의 그래픽 시스템 지원을 필요로 하지 않아서 다양한 플랫폼 상에 쉽게 이식될 수 있다. 또한, 소스 코드가 공개되어 있어서 응용에 따라 수정 및 확장이 용이하다. 본 연구에서는 내장형 리눅스 상에서 동작하는 마이크로윈도우즈를 이용하여 퍼스널자바 AWT를 구현하였으며 다양한 응용프로그램을 이용하여 그 효용성을 입증하였다. Java is a promising runtime environment for embedded systems because it has many advantages such as platform independence, high security and support for multi-threading. One of the most famous Java run-time environments, Sun's PersonalJavaTM is based on Truffle architecture, which enables programmers to design various GUIs easily. For this reason, it has been ported to various embedded systems such as set-top boxes and personal digital assistants(PDA's). Basically, Truffle uses heavy-weight window managers such as Microsoft Win32 API and X-Window. However, those window managers are not adequate for embedded systems because they require a large amount of memory and disk space. To come up with the requirements of embedded systems, we adopt Microwindows as the platform graphic system for PersonalJava AWT onto Embedded Linux. Although Microwindows is a light-weight window manager, it provides as powerful API as traditional window managers. Because Microwindows does not require any support from other graphics systems, it can be easily ported to various platforms. In addition, it is an open source code software. Therefore, we can easily modify and extend it as needed. In this paper, we implement PersonalJava AWT using Microwindows on embedded Linux and prove the efficiency of our approach.
Mobility and QoS Support in 4G Wireless Networks
Kim Taehyoun,Lee Jaiyong The Korea Institute of Information and Commucation 2005 Journal of communications and networks Vol.7 No.2
Fourth-generation (4G) wireless networks will be the IP-based cellular networks integrating Internet with the existing cellular networks. Two important issues should be concerned in the IP-based cellular networks, IP mobility, and quality-of-service (QoS) guarantees. In this paper, we proposed two mechanisms to solve the problems with IP mobility and RSVP-based QoS provisioning. First, virtual-IP (VIP) allocation scheme in areas with a large rate of handoff can minimize the wireless signaling overhead due to IP mobility. The access routers (ARs) create dynamically the VIP zone by using the measured handoff rate derived from the history of the handoff into neighboring ARs. We show that VIP allocation scheme reduces the binding update messages in the wireless link than hierarchical mobile IPv6. Second, the new advance resource reservation protocol called proportional aggregate RSVP (PA-RSVP) can minimize waste of bandwidth and soft state refresh overhead due to IP mobility. It allocates the bandwidth in advance between the mobility anchor point and neighboring ARs using proportional aggregate reservation. We also show that PA-RSVP provides an improved performance over existing protocols.
Analysis of Optimal Jitter Buffer Size for VoIP QoS under WiMAX Power-Saving Mode
KIM, Hyungsuk,KIM, Taehyoun The Institute of Electronics, Information and Comm 2010 IEICE TRANSACTIONS ON COMMUNICATIONS - Vol.93 No.6
<P>VoIP service is expected as one of the key applications of Mobile WiMAX, but the speech quality of VoIP service often suffers deterioration due to the fluctuating transmission delay called <I>jitter</I>. This is commonly ameliorated by a de-jitter buffer, and we aim to find the optimal size of de-jitter buffer to achieve speech quality comparable to PSTN. We developed a new model of the packet drops at the de-jitter buffer and the end-to-end packet delay which takes account of the additional delay introduced by the WiMAX power-saving mode. Using our model, we analyzed the optimal size of the de-jitter buffer for various network parameters, and showed that the results obtained by analysis accord with simulation results.</P>
소프트웨어 인스펙션 척도의 기준치 비 의존 상대적 데이터 분석
김태현 ( Taehyoun Kim ),박진희 ( Jinhee Park ),최옥주 ( Okjoo Choi ),신주환 ( Juhwan Shin ),백종문 ( Jongmoon Baik ) 한국정보처리학회 2012 한국정보처리학회 학술대회논문집 Vol.19 No.2
소프트웨어 개발에 있어 각 단계별 프로세스 활동들에 대한 분석 및 평가는 소프트웨어의 품질을 좌우하는 큰 요인이다. 따라서 많은 소프트웨어 척도들이 소프트웨어 품질을 분석하는데 이용되고 있으며 유사 프로젝트를 통해 설정되는 기준치와 척도 값의 비교가 수행된다. 하지만 기존의 유사 프로젝트를 찾기란 쉽지 않은 일이며 유사 프로젝트를 찾더라도 해당 프로젝트의 개발 환경은 현재 개발 중인 프로젝트의 환경과 다른 경우가 많다. 따라서 본 논문에서는 외적인 기준치에 의존하지 않고 현재 개발 단계의 인스펙션 결과를 분석하는 방법을 제시하도록 한다. 산포도를 이용한 상대적 데이터 분석이 이용되며 국방 도메인에서 개발 중인 프로젝트 내부 31 개의 기능으로부터 수집된 데이터를 통한 사례분석을 수행하도록 한다. 이를 통해 기능들 간 현재 개발 과정의 일관성 유지 여부를 평가하고 다음 개발 단계의 프로세스 활동 강화 여부에 대한 권고 사항을 제시할 수 있다.
확장가능한 다목적 주문형 멀티미디어 시스템의 설계 및 구현
김태현(Taehyoun Kim),조진성(Jinsung Cho),성민영(Minyoung Sung),정세욱(Sewook Jung),김기한(Keehan Kim),신현식(Heonshik Shin) 한국정보과학회 1997 한국정보과학회 학술발표논문집 Vol.24 No.2Ⅲ
주문형 멀티미디어 시스템은 사용자의 요구에 따라 다양한 응용을 가지며, 이러한 응용에 대해 서비스를 제공하는 서버는 고객의 수에 따라 융통성 있게 확장될 수 있어야 한다. 본 논문에서는 사용자의 목적에 적합한 멀티미디어 응용 프로그램의 작성을 용이하도록 하는 다목적 고객 API와 통신망의 형태와 사용자의 규모에 따라 적절히 구축될 수 있는 분산 다중 서버 시스템을 설계, 구현한다. 설계된 분산 다중 서버는 전위 노드의 역할을 수행하는 서비스 조정자와 복수의 데이타 서버로 이루어진 서버풀(pool)로 구성되며, 유닉스 호환의 플랫폼에 쉽게 이식, 확장될 수 있도록 설계, 구현되었다. 또한 구현된 프로토타입 서버 시스템과 고객 API를 이용하여 작성된 CinemaNet 응용 프로그램을 연동하여 WWW 환경에서 주문형 비디오 서비스를 개발한다.
Surface Mound PIN 다이오드를 이용한 3비트 디지털 위상기의 설계
김태현(TaeHyoun Kim),고대식(DaeSik Ko),신승하(SeungHa Shin) 한국정보기술학회 2005 한국정보기술학회논문지 Vol.3 No.4
In this paper, the low power surface mount PIN diode phase shifter has been used for phased array antenna. The phase shifter has been designed by 3-bit of 45°, 22.5°, and 11.25° using the loaded-line circuits. The measurement is performed in the frequency range from 1.885GHz to 2.2㎓ covering up-link and down-link of IMT-2000. The results have shown good agreement within ±1.5° phase error for each bit, and within average ±60° phase error at the center frequency. The average insertion loss is -2.81 ㏈ at the center frequency. The average insertion loss for each stage is -0.94㏈.