국립공원 아고산대 독립훼손지 복원식생 분포특성 및 관리방안

김종엽(Jong-Yup Kim),윤주웅(Ju-Ung Yun),한봉호(Bong-Ho Han),곽정인(Jeong-In Kwak),박석철(Seok-Cheol Park),박수영(Su Young Park),정원옥(Won-Ok Jeong) 국립공원연구원 2022 국립공원연구지 Vol.13 No.1

본 연구는 독립훼손지 중 아고산대에 위치한 지리산국립공원 세석평전과 노고단 복원식생지를 대상으로 현존식생 분석 및 식생분포 특성을 파악하여 중장기적인 모니터링 및 관리방안 수립을 위한 기초자료를 제공하고자 수행하였다. 현존식생 조사범위는 훼손지 일대 유역권분포 현황을 고려하여 설정하였으며, 세석평전 조사면적은 55,037㎡, 노고단 조사면적은 166,599㎡ 이었다. 세석평전은 초본층에 의한 식생피복도는 90% 이상 수준으로서 나지노출이 없었고, 관목층의 피복도가 60% 이상으로 안정화되어 있었다. 주요 출현수종은 구상나무, 사스래나무, 쇠물푸레나무, 철쭉, 털진달래, 붉은병꽃나무 등 식재수종과 자연적으로 이입한 자생수종이 생육하고 있었다. 노고단은 신갈나무, 호랑버들, 철쭉, 털진달래, 미역줄나무 등이 우점하는 관목식생지가 52%로 가장 넓게 분포하고 있었고, 전반적으로 식생활착 상태가 양호하였다. 노고단의 원식생은 신갈나무군락으로 추정되었고, 군부대철거지에는 귀화식물이 분포하고 있기 때문에 적극적인 관리가 필요하였다. 연구대상지는 장기적으로 주변 자연식생과 조화로운 식생경관으로 발달할 것으로 예측되었다. 향후 훼손지 복원모델은 인근 지역의 원식생을 고려하여 설정해야 할 것이지만, 복원 달성 목표는 실현가능한 수준의 목표를 설정해야 할 것이다. This study was conducted to provide basic data for mid-to long-term monitoring and establishment of management plans by analyzing the existing vegetation and identifying the vegetation distribution characteristics for the restored vegetation in Nogodan and Seseokpyeongjeon in Jirisan National Park located in the subalpine zone among the independent damaged areas. Actual vegetation survey range was established in consideration of the distribution of the watershed around the damaged area. The surveyed area of Seseokpyeongjeon was 55,037㎡, and the surveyed area of Nogodan was 166,599㎡. In Seseokpyeongjeon, the vegetation coverage by the herbaceous layer was almost 90% or more, there was no bare exposure, and the coverage of the shrub layer was stabilized at 60% or more. The main emerging tree species were planted species such as Abies koreana, Betula ermanii, Fraxinus sieboldiana, Rhododendron schlippenbachii, Rhododendron mucronulatum var. ciliatum, and Weigela florida as well as natively migrated native species. In Nogodan, the shrub vegetation dominated by Quercus mongolica, Salix caprea, Rhododendron schlippenbachii, Rhododendron mucronulatum var. ciliatum, and Tripterygium regelii was the most widely distributed with 52% of the area, and the overall diet was good. The native vegetation of Nogodan was presumed to be a cypress colony. Naturalized plants were distributed in the military base demolition site, so active management was required. The study site was predicted to develop into a vegetation landscape in harmony with the surrounding natural vegetation in the long term. In the future, the restoration model for damaged areas should be set in consideration of the native vegetation of the nearby area, but the goal to achieve restoration should be set at a feasible level.

신조 의태어의 실태와 문제

박철주 한국어학회 2007 한국어학 Vol.35 No.-

The purpose of the present paper offers an analysis of the newly-coined mimetic word. We encounter new mimetic word in these days. Also the newly-coined mimetic word has very various forms. The newly-coined mimetic word is accomplished by 'mimetic word of facial expression', 'mimetic word of body operation', 'mimetic word of operation of thing', and 'mimetic word of situation expression'. The newly-coined mimetic word consists of newly creation, modification of general mimetic word, borrowing from adverb, adjective, verb, and borrowing from foreign language. However, the newly-coined mimetic word escapes from the environment of communication of internet, and the broadcasting is using it mimetic word recently even from publication. This problem is very serious against the mimetic word. Therefore, this research will discuss this problem.

연마방법에 따른 탄성의치의 표면거칠기와 Candida albicans의 부착율 변화

오주원,서재민,안승근,박주미,강철균,송광엽 대한치과보철학회 2012 대한치과보철학회지 Vol.50 No.2

연구 목적: 본 연구는 탄성의치 제작 시 주로 사용되는 polyamide를 수종의 연마방법을 사용하여 처리 후 Candida albicans의 부착정도와 표면거칠기를 비교하고자 하였다. 연구 재료 및 방법: 25×15×2 mm 크기의 polyamide 시편을 4군으로 나누어 연마재를 사용하여 기공용 lathe 연마하는 방법(기공실내 연마방법)과 각기 다른 2종의 실리콘 포인트로 진료실내 연마하는 방법, 그리고 실리콘포인트 연마 후 pumice로 연마하는 방법으로 처리하였다. C. albicans의 부착성을 평가하기 위해 5×106 CFU/ml의 C. albicans 현탁액에 시편을 2시간 동안 침적하였고 5회 수세처리 후 한천배지에서 배양하였다. 그리고 주사전자 현미경(JSM-5900, JEOL LTd., Tokyo, Japan) 촬영을 시행하였다. Profilometer (Surf-pak; Kawasaki, Japan)를 이용하여 표면거칠기를 측정하였고 통계처리를 위하여 SPSS 18.0 프로그램을 사용하였다. 일원변량분석으로 비교 분석하였고 사후검증은 C. albicans의 부착성 검증을 위해 Scheffe test를 시행하였으며 표면조도검증을 위해 Tamhane’s T2 test를 시행하였다(α=.01). 결과: 최대 거칠기 값을 보인 군은 2단계의 연마용 버를 사용한 것으로 0.32 ㎛±0.10 값을 나타냈으며, 가장 낮은 거칠기 값을 보인 것은 tungsten carbide를 사용하지 않고 기공용 lathe로만 연마를 한 군으로 0.02 ㎛±0.00의 거칠기 값을 나타냈다. C. albicans 부착 실험에서는 기공용 lathe만을 이용한 연마방법이 가장 적은 부착수를 보였으며 다른 세 군과 유의한 차이가 발견되었다(P<.01). 결론: 표면거칠기 및 미생물 부착능 실험 결과 기공실 연마만을 시행한 경우 유의하게 낮은 거칠기 값과 부착율을 보였다. Pumice로 추가 연마한 군은 진료실연마를 시행한 군에 비해 낮은 거칠기 값을 보였으나 C. albicans 부착에 있어서는 유의한 차이를 보이지 않았다(P>.01). Purpose: The purpose of this study was to compare the effect of 3 chairside polishing methods and laboratory polishing methods on surface roughness and C. albicans adhesion of polyamide denture base. Materials and methods: Using contact profilometer, the surface of polyamide specimens (25×15×2 mm) was studied after conventional polishing without finishing and after chiarside polishing with 2 chiarside polishing kits and chairside-pumice polishing following finishing with tungsten carbide bur. To evaluate the adhesion of C. albicans, C. albicans suspension was overlayed on the test specimen. And the specimens were incubated for 2 hours. Imprint culture method was achieved and counted the colony on the agar plate. Polished polyamide were evaluated using a scanning electron microscope. The statistics were conducted using one-way ANOVA and in case of difference, Scheffe test and Tamhane’s T2 test were used. Results: Surface roughness (Ra) of surfaces polished with 2 chairside polishing kits had higher than conventional polishing and pumice polishing. The highest roughness value was 0.32 ± 0.10 ㎛, and the lowest was 0.02 ± 0.00 ㎛. The adhesion of C. albicans on the specimens polished with chairside polishing group and pumice polishing group were increased than conventional polishing group (P<.01). Conclusion: Conventional laboratory polishing was found to produce the smoothest surface and the lowest adhesion of C. albicans. Two groups polished with Chairside polishing kits were similar with respect to surface roughness. Surface of the specimen polished with pumice is significantly smoother than 2 chairside polishing groups, but the result of C. albicans adhesion is that group polished with pumice was similar with 2 chairside polishing groups (P>.01).

자연정화공법에 의한 소형 하수처리장치 개발을 위한 최적 깊이 및 호기ㆍ협기 비율

서동철,박미령,곽내운,황하나,이홍재,조주식,허종수 한국환경농학회 2006 한국환경농학회지 Vol.25 No.1

발산풍열약(發散風熱藥)의 항고혈압작용에 관한 연구

金護哲,朴珠瑛,安德均 대한본초학회 1999 大韓本草學會誌 Vol.14 No.1

Balsanpungyeolyak, Expelling Pathogenic Wind-Heat Drug, have been used to treat the symptoms such as fever, headache, neck stiffness and skin disturbance which are commonly shown in systemic fever disease like influenza. We thought that the symptoms from the actions of wind and heat in Traditional Korean Medicine are similar to the ones of hypertensive patients in clinic. We chose five drugs among expelling pathogenic wind-heat drugs, Puerariae Radix, Chrysanthemi Flos, Menthae Herba, Mori Folium, and Arctii Fructus, to investigate their antihypertensive effects on S.H.R. and normotensive S.D rats, direct relaxant activity on isolated rabbit aorta, and ACE inhibitory activity. Menthae Herba and Arctii Fructus decreased blood pressure significantly in SHR, but not in normotensive rats, Direct vasodilatative effects on isolated rabbit aorta was not observed in any group. Chrysanthemi Flos, Menthae Herba, Mori Folium, and Arctii Fructus inhibited the actions of ACE dose-dependently. Therefore it is concluded that expelling pathogenic wind-heat drugs has not direct correlation with antihypertensive activity. However, it can be suspected that some drugs for dispersing the actions of wind and heat may regulate blood pressure through ACE inhibition and further study will be helpful to understand the mechanism.

자연정화공법에 의한 하수처리장에서 최적 여재 선정

서동철,이홍재,조주식,박현건,김형갑,허종수 한국환경농학회 2003 한국환경농학회지 Vol.22 No.1

농어촌 등에서 소규모로 발생하는 하수를 환경친화적이고 높은 하수처리효율을 유지하면서 하수처리장의 장기간 사용을 위한 최적의 여재를 선정하기 위하며 자연정화공법을 이용한 소형하수처리장치를 호기성조 및 혐기성조로 구분하여 시공한 다음, 하수처리량 및 여재 입경별 수처리 효율을 조사하였고, 호기성조와 혐기성조에서 여재 입경별 하수의 투수속도를 조사한 결과는 다음과 같다. 호기성조 처리수 및 방류수중의 pH 및 EC는 여제입경에 따라서 별 차이가 없었고, 용존산소는 호기성조를 동과한 호기성조 처리수의 용존산소는 큰 폭으로 증가하였으나 혐기성조를 통과한 방류수의 용존산소는 호기성조 처리수에 비해 약간 감소하여 여재입경 및 하수처리량에 따라서 별 차이가 없이 약 2.4~5.1 mg/L정도이었다. BOD,000 및 탁도 처리율은 여재 대(4~10 mm)를 사용했을 경우에도 호기성조 처리수에서 BOD 처리율은 약 91%이상, COD 처리율은 73%이상, 탁도 처리율은 83%이상이었으며, 이들 처리율은 여재입경이 작을수록 증가하였고 모든 조건에서 방류수중의 BOD 처리율은 98%이상, COD 처리율은 91%이상, 탁도 처리율은 98%이상이었다. 여재입경별 총 질소 및 총 인 처리율은 여재입경이 작을수록 약간 증가하였고, 모든 조건에서 방류수중의 총 질소 처리율은 약 45~59%, 총 인 처리율은 약 80~96% 정도이었다. 하수 처리율 및 투수속도를 고려해 볼 때 하수처리장 호기성조의 최적입경은 2~4 mm정도 혐기성조의 최적입경은 0.1~4 mm정도가 적절한 젓으로 사료되었다. 따라서 이러한 조건을 자연정화공법을 이용한 하수처리장에 적용하면 높은 하수처리효율을 유지하면서 하수처리장의 공극폐쇄현상이 일어나지 않아 장기간 운전할 수 있을 것으로 판단된다. An investigation was carried out to evaluate the effects of pebble size on the small-scale sewage treatment apparatus by natural purification method that consisted of aerobic and anaerobic plot pH and EC in both plots varied minimally regardless of pebble size. DO in aerobic plot increased as the pebble size decreased. That in the anaerobic plot was slightly less in comparison with that of the aerobic plot, but varied minimally, 2.4~5.1 mg/L regardless of pebble size. Under all experimental conditions, removals of BOD, COD and turbidity in anaerobic plot were more than 98, 91 and respectively. Removals of T-N and T-P increased as pebble size decreased. Under all experimental conditions, removals of T-N and T-P in anaerobic plot were about 45~59 and 80~96%, respectively. Judging from the above results, it should be considered that the optimum pebble size and pebble permeability in both plot was 2~4 mm and 0.1~4 mm, respectively.

황색포도구균의 균혈증에서 초기 항생제 치료가 예후에 미치는 영향

김성한,박완범,이기덕,강철인,최영주,김홍빈,박상원,김의석,오명돈,김의종,최강원 대한감염학회 2002 감염 Vol.34 No.5

경고막적 및 고막외적 전극위치에 따른 와우전위의 비교연구

장동임,박철규,이병돈,장혁순,강주원 순천향의학연구소 1995 Journal of Soonchunhyang Medical Science Vol.1 No.1

Electrocochleography is a method of the measurement of electrical events generated either within the cochlea or by primary afferent neurons. It includes measures of summating potential(SP) and cochlear microphonics(CM) from the cochlea, and action potential(AC) from the auditory nerve. There are severval diffefent ways to measure the potentials, mainly transtympanic and extratympanic methods. The purpose of this study is to provide a normal data of eletrocochleography in adults and compare the results obtained by extratympanic and transtympanic methods. The following results were obstained: 1. As the intensity of sound was increased, the SP amplitude and AP amplitude were increased. There was no significant difference between extratympanic and transtympanic method. 2. As the intensity of sound was increased, the SP latency and AP latency were shortened without significant difference between two different methods. 3. As the intensity of sound was increased, the SP/AP ratio was increased without difference in both methods which was less than o.30. 4. Non-invasive method of electrocohleography, the extratympanic method, can be one of the easy method an can be used widely clinically.

기관에서 발생한 전이성 갑상선 유두상 암종 1례

장선호,박철규,이병돈,장혁순,강주원 순천향의학연구소 1995 Journal of Soonchunhyang Medical Science Vol.1 No.2

Papillary adenocarcionma has been common malignant tumor of human thyroid gland, and metastasize to the lung and bone as well. But endotracheal meastasis of papillary adenocarcinoma is very unusual. A 75 years old woman was presented with a metastatic papillary thyroid adeno- carcinoma in the trachea, 10 years after total thyroidectomy. The tumor mass was located in the anterior wall of tracheal lumen. The mass was confirmed with pathologic finding. We describe a case of tracheal papillary adenocarinoma of thyroid gland origin and discuss the current recommendation for management.

알루미나이징 表面處理한 構造用鋼의 彼勞强度 및 破壞擧動에 관한 硏究

吳世旭,朴春根,全泰玉,全哲昊,周原植,李圭用 東亞大學校 大學院 1978 大學院論文集 Vol.2 No.-

Aluminizing-treated structural steel is excellent in high temperature oxidation resistance, wear resistance and corrosion resistance. So, it has been widely used for the machine parts which have required such properties. However it is difficult to find out any study result of the notched influence on the aluminizing-treated materials and the second diffusion materials. In this investigation the low carbon steel plates with with V-notches were coated with aluminum and made into second diffusion. With these specimcns the bending fatigue strength and fatigue life were observed and also crack propagation of alloy layer was investigated. The results obtained are as follows: 1) On the smoothed specimens a fatigue limit of aluminizing material was lower than the one of raw material, but it was more increased than the one of heat treatment material, and the fatigue limit of second diffusion material was lowest. 2) On the V-notched specimens a fatigue limit of aluminizing material was higher with 44% increase ratio than the one of raw material and with 63% increase ratio than the one of heat treatment material, and the rate of increase became lower increase ratio in a fatigue limit comparing to aluminzing material, with no influence of notch radius. 3) According as the notch radius became smaller, the fatigue limit became. higher on the raw material, it was same on th aluminizing material and lowest on the second diffusion material. 4) Crack initiation period was 0.04% below of fatigue crack life and the full growth period of crack propagation at alloy layer was 0.1%. The crack propagation from alloy layer to matrix was 16% of the fatigue crack life. This means that the crack propagation rate at alloy layer was very fast but the crack delay at the boundary of both was so long. 5) Crack propagation grows through defects, inclusion, peeling and previous boundary.