조력, 조류 및 해류발전의 기술개발 동향

장경수,이용범,이근호,정동수,Jang, Gyeong-Su,Lee, Yong-Beom,Lee, Geun-Ho,Jeong, Dong-Su 재료연구소 2010 機械와 材料 Vol.22 No.4

화석 에너지 고갈과 지구온난화의 위기로 인하여, 미개척 분야인 해양에너지 산업에 대한 전 세계적 관심이 높아지고 있다. 특히 조력발전, 조류발전 그리고 해류발전은 현 정부의 녹색성장기술 신재생에너지에 속한 산업 군으로서, 정부정책 기조와 일치하는 해양 분야의 신성장 동력 아이템이다. 조력발전의 경우 우리나라는 조석간만의 차가 큰 서해안의 지형적 이점을 바탕으로 세계 시장에서 높은 경쟁력 가지고 있으며, 국내에서도 상용화를 위한 조류발전기 개발 및 실증시험을 진행하고 있다. 그러나 해류발전은 그 개념이 국내에서 확립되어 개발 초기단계에 있는 해양발전의 새로운 영역으로서, 전 세계적으로 개발사례가 없다. 해류발전용 해류발전기는 조류발전기에 비하여 크기가 작으나 발전용량이 크며, 개발 및 제작비용이 저렴하므로 조력발전소나 방조제의 수문 근처에 추가적으로 설치하면 매우 큰 시너지 효과를 얻을 수 있을 것으로 기대된다. 본고에서는 조력, 조류 및 해류발전에 대한 개념 소개와 조력발전과 조류발전의 국내외 개발현황 분석 그리고 새로운 개념인 해류발전에 대한 기술적 가능성을 제시하고 기대효과를 간략하게 소개하였다.

JNI를 이용한 MMS 구현

장경수,신동렬,Jang, Kyung-Soo,Shin, Dong-Ryeol 한국정보처리학회 2000 정보처리논문지 Vol.7 No.1

MMS(Manufacturing Message Specification)는 PLC, NC, 로봇 등과 같이 서로 다른 제조회사의 서로 다른 단위제어기기 제품들간에 통신할 수 있는 ISO/IEC 9506으로 표준화된 공장자동호용 프로토콜이며 OSI 참조 모델의 최상위 층인 응용계층 프로토콜에 해당된다. 본 논문은 MMS를 TCP/IP상에서 동작할 수 있도록 유닉스 환경에서 ASNSI-C 언어로 구현하고, 이 구현된 프로토콜을 JNI(Java Native Interface)를 이용해 JAVA 클래스화한다. JAVA 클래스화함으로써 기존에 제공되는 MMS 라이브러리를 이용하는데 있어 표준화되지 않은 서로 다른 API를 이용하는데 어려움과 GUI를 구현하는데 어려움을 극복하는 기본을 제공한다. 그리고 구현된 JAVA 클래스화된 MMS 라이브러리를 인터넷의 WWW상에서 동작시킬 수 있도록 자동화된 PCB(Printed Circuit Board) 조립라인을 대상 모델로 선정하여 응용 프로그램을 작성하여 구현된 JNI를 이용한 MMS가 인터넷상에서 동작하여 사용자에게 일괄성있는 인터페이스를 제공하는 웹 브라우저를 통해 RMD(Real Manufacturing Device)를 동작${\cdot}$제어${\cdot}$감시할 수 있음을 보여준다. Manufacturing Message Specification (MMS) is designed as a communication standard protocol, ISO/IEC 9506, on factory automation for messaging between heterogeneous programmable unit controller, PLC, NC, Robot, of different vendors on the networks. MMS is also a standard protocol of OSI reference model application layer, In this paper, we show an implementation of MMS over TCP/IP using ANSI-C programming language on the unix environment, and make java classification using java native interface (NJI) with MMS library. The use of java classification provides a basic environment ot overcome a difficult programming with different MMS application programming interface (MMS-I) which requires a siklled programming technique of graphic user interface (GUI). In this paper, we implement a MMS application program of the automated assembly model for printed circuit board based on WWW which shows the operation, control and monitoring of real manufacturing device (RMD) with web browser providing users for consistent user interface.

SAN을 이용한 제한된 버퍼 크기를 갖는 출력큐잉 ATM 스위치 성능평가

장경수,신호진,신동렬,Jang, Kyung-Soo,Shin, Ho-Jin,Shin, Dong-Ryeol 한국정보처리학회 2000 정보처리논문지 Vol.7 No.8

High speed switches have been developing to interconnect a large number of nodes. It is important to analyze the switch performance under various conditions to satisfy the requirements. Queueing analysis, in general, has the intrinsic problem of large state space dimension and complex computation. In fact, The petri net is a graphical and mathematical model. It is suitable for various applications, in particular, manufacturing systems. It can deal with parallelism, concurrence, deadlock avoidance, and asynchronism. Currently it has been applied to the performance of computer networks and protocol verifications. This paper presents a framework for modeling and analyzing ATM switch using stochastic activity networks (SANs). In this paper, we provide the ATM switch model using SANs to extend easily and an approximate analysis method to apply A TM switch models, which significantly reduce the complexity of the model solution. Cell arrival process in output-buffered Queueing A TM switch with finite buffer is modeled as Markov Modulated Poisson Process (MMPP), which is able to accurately represent real traffic and capture the characteristics of bursty traffic. We analyze the performance of the switch in terms of cell-loss ratio (CLR), mean Queue length and mean delay time. We show that the SAN model is very useful in A TM switch model in that the gates have the capability of implementing of scheduling algorithm. 네트워크 연결을 위한 고속 스위치는 계속해서 발달하여 왔으며, 스위치가 필요한 성능을 내는가를 여러 조건으로 분석하는 것은 중요한 일이다. 하지만, 복잡한 구조를 가진 시스템을 모델링하여 그 성능을 측정하는 것은 쉬운 일이 아니다. 큐잉이론을 이용한 모델링은 큰 상태 공간을 고려해야 됨은 물론이고 성능평가에 있어서도 복잡한 계산과정을 수행해야 하지만, SAN(Stochastic Activity Networks)에 의한 모델링과 성능평가는 그에 비해 간단하다는 장점이 있다. 본 논문의 목적은 출력포트에 큐를 갖는 고속 ATM 스위치를 확장된 SPN(Stochastic Petri Net)인 SAN을 이용해 모델링하고, 셀 도착 과정은 실제 트래픽과 유사한 특징을 가지고 있는 MMPP(Markov Modulated Poisson Process)로 모델링하여 그 성능을 평가하는데 있다. MMPP 모델을 이용한 버스티 트래픽을 고겨한 성능측정과 아울러 SAN의 장점을 이용한 확장이 용이한 스위치 모델을 보이고자 한다. 제한된 버퍼 크기를 갖는 출력 큐잉 ATM 스위치에 도착하은 셀은 포아송 도착 과정에서는 정확히 표현할 수 없는 버스티 특징을 표현할 수 있어 좀더 실제 트래픽에 가까운 MMPP로 모델링한다. SAN 모델은 UltraSAN 소프트웨어 패키지를 이용해 대기행렬의크기, 지연시간 그리고 셀 손실률에 대한 성능을 측정한다.

골조직과 임플랜트 계면의 최소접촉분율에 관한 삼차원 유한요소분석적 연구

장경수,김영수,김창회,Jang, Kyoung-Soo,Kim, Yung-Soo,Kim, Chang-Whe 대한치과보철학회 1997 대한치과보철학회지 Vol.35 No.4

In order to find the degree of osseointegration at bone-implant interface of clinically successful implants, models including the 3.75mm wide, 10mm long screw type $Br{\aa}nemark$ implant as a standard and cylinder, 15mm long, 5.0mm wide, two splinted implants, and implants installed in various cancellous bone density were designed. Also, the amount of load and material of prostheses were changed. The stress and minimum contact fraction were analyzed on each model using three-dimensional finite element method(I-DEAS and ABAQUS version 5.5). The results of this study were as follows. 1. 10mm long, 3.75mm diameter-screw type implant had $36.5{\sim}43.7%$ of minimum contact fraction. 2. Cylinder type implant showed inferior stress distribution and higher minimum contact fraction than screw type. 3. As implant length was increased, minimum contact fraction was increased a little, however, maximum principal stress was decreased. 4. Implants with a large diameter had lower stress value with slightly higher minimum contact fraction than standard screw type. 5. Two splinted implants showed no change of minimum contact fraction. 6. The higher bone density, the lower stress value. 7. The material of occlusal surface had no effect on the stress of the bone-implant interface.

고이동도 산화물 반도체 박막 트랜지스터 구현을 위한 구동전류 향상

장경수,김태용,강승민,이소진,이윤정,이준신,Jang, Kyungsoo,Raja, Jayapal,Kim, Taeyong,Kang, Seungmin,Lee, Sojin,Nguyen, Thi Cam Phu,Than, Thuy Trinh,Lee, Youn-Jung,Yi, Junsin 한국전기전자재료학회 2015 전기전자재료학회논문지 Vol.28 No.6

Next-generation displays should be transparent and flexible as well as having high resolution and frame number. The main factor for active matrix organic light emitting diode and next-generation displays is the development of TFTs (thin-film transistors) with high mobility and large area uniformity. The TFTs used for transparent displays are mainly oxide TFT that has oxide semiconductor as channel layer. Zinc-oxide based substances such as indium-gallium-zinc-oxide has attracted attention in the display industry. In this paper, the mobility improvement of low cost oxide TFT is studied for fast operating next-generation displays by overcoming disadvantages of amorphous silicon TFT that has low mobility and poly silicon TFT that requires expensive equipment for complex process and doping process.

자연 치아와 골유착성 임플랜트의 동요도에 관한 연구

장경수,김용호,김영수,Jang, Kyoung-Soo,Kim, Yong-Ho,Kim, Yung-Soo 대한치과보철학회 1995 대한치과보철학회지 Vol.33 No.1

It is well known that implants showing no clinical mobility are successfully osseointegrated and have good prognosis. When implants are under load, their mobility begins to increase. It is of necessity to substantiate whether excessive load is on or premature occlusal force is acting prior to desirable osseointegration. Using Periotest unit, we could measure the pattern of mobility change. Consequently, osseointegrated treatment has come to success by intercepting progressive mobility and doing perceptive treatment according to the result of Periotest Value(PTV). In this study, we took records of intangible mobility of 70 osseointegrated implants. And we also measured the mobility of periodontally sound natural teeth as a standard from 30 dental personnel. Conclusions were summarized as followings ; 1. Lower lateral incisor has the highest PTV, whereas lower canine, upper canine, lower premolars and lower 1st molar have the lowest PTV in natural dentition. 2. There are little significant statistical difference of PTV between men and women in both(natural and implant) dentition. 3. In general, lower natural teeth show lower PTV than upper counterpart. 4. Mandibular implants have lower PTV than those of maxillary implants. 5. All of the successfully osseointegrated implants have lower PTV than those of periodontally healthy teeth.

의치상 이장재 표면의 캔디다 균주에 대한 항균제의 억제 효과

장경수,Jang, Kyung-Soo 대한치과보철학회 1999 대한치과보철학회지 Vol.37 No.3

The purpose of this study was to evaluate the in vitro antifungal effect of several kinds of denture lining materials containing nystatin and silver-zeolite on Candida albicans. Three commercially available tissue conditioners (Soft-Liner, Coe-Comfort, Coe-Soft) and two direct denture relining materials (Tokuso Rebase, Durabase) were selected. In terms of the zone of inhibition and some basic physical properties, I could find the following results ; 1. Nystatin or silver-zeolite included in those relining materials had definite antifungal activities against the Candida albicans. 2. As times went on, both of the antifungal agents's activities decreased gradually. 3. Antifungal agents did not affect the relining materials' basic physical properties. 4 Direct chairside relining materials showed unfavorable dark discoloration with response to silver-zeolite.

치과 임플랜트 보철 장착자의 구강 감각 기능에 관한 연구

장경수,김영수,Jang, Kyoung-Soo,Kim, Yung-Soo 대한치과보철학회 1991 대한치과보철학회지 Vol.29 No.1

In this study, oral sensory function in the osseointegrated root form implant-supported prostheses wearers was estimated by measuring occlusal tactile perception threshold of thickness and sensibility threshold against lateral static loading, and comparing with normal dentition subjects and complete denture wearers group. Osseointegrated root form implants seemed to be restored in the sensation to some extent, and so, dental implants restored edentulous patients in a wide meaning. Conclusions were summarized as following. 1. Occlusal tactile perception threshold of thickness was highest in complete denture wearers group, following by implant-supported prostheses wearers group, normal dentition subjects group. 2. In the implant-supported prostheses wearers group, occlusal tactile perception threshold of opposing artificial teeth case was higher than of opposing natural or opposing implantsupported teeth case. 3. Sensibility threshold against lateral loading of complete denture wearers and implantsupported prostheses wearers group was higher than that of normal dentition subject group. 4. In the implant-supported prostheses group, sensibility threshold against lateral loading was not significantly different between upper and lower jaws. 5. In occlusal tactile perception threshold of thickness and sensibility threshold against lateral loading test, there was no regularity among values of each tooth, and no significant difference between anterior and posterior teeth as well.

Web기반의 상습침수지구 관리시스템 개발

장경수,전지영,금도훈,지홍기,Jang,Kyung-Soo,Jun,Ji-Young,Keum,Do-Hun,Jee,Hong-Kee 한국방재학회 2007 한국방재학회 학술발표대회논문집 Vol.2007 No.1

The frequently flooded area has been known as very vulnerable area. This area has nature disasters such as typhoon, storm and flood almost every year. The purpose of this study is to develop a management system for frequently flooded area by Web based. So this system is possible to disaster management which irrespective of time and place. Through this system, general user can easily retrieve status information and obtain that in visual way such as maps. graph, and texts if they have only certain web browsers.

ICCP를 사용한 전력센터간의 통신 프로토콜 구현

장경수,장병욱,한경덕,신동렬,Jang, Kyung-Soo,Chang, Byung-Wook,Hahn, Kyung-Duk,Shin, Dong-Ryeol 한국정보처리학회 2000 정보처리논문지 Vol.7 No.12

현재의 전력시스템은 컴퓨터와 통신기술의 발전으로 분산시스템인 EMS(Energy Menagement System)/SCADA(Super-vision Control and Data Acquisition) 형태로 운영되어 전력의 생산, 전송 그리고 분배가 효과적으로 이루어지고 있다. 그러나 각 시스템은 언어, 운영체제 그리고, 통신프로토콜이 서로 다른 제품으로 구성되어 시스템간에 데이터를 교환하는데 많은 어려움이 따르고 있다. 이러한 문제를 해결하기 위해서는 미국 전력연구소는 전력제어센터간의 통신을 담당하는 ICCP(Inter-Control Center Protocol)라는 새로운 형태의 통신규약을 발표하였다. ICCP는 자동화용 표준 통신규약인 MMS(Manufacturing Message Specification)를 응용계층의 하부 규약으로 지정함으로써 서로 다른 기종의 제어센터간의 원활한 통신을 지원한다. 본 논문은 ICCP의 특징과 MMS와 ICCP가 어떻게 상호 연관되는가를 밝힌다. ICCP에서 이용하는 MMS 라이브러리(library)의 86개의 서비스 중 일부 서비스를 구현한 후 이것을 이용하여 TCP/IP 환경 하에서 ICCP의 기본이면서 핵심적인 기능을 구현한다. 그 다음, ICCP 프로토콜을 이용하여 EMS간의 통신을 모델링하고, 전력센터간의 실제 데이터 교환을 윈도우 환경 하에서 구현하여 ICCP 프로토콜의 동작과 기능을 보여준다. Current power systems are distributed geographically and operated in the form of Energy Management System(EMS)/ Supervision Control and Data Acquisition(SCADA) with the aid of computers and communications. Recently a variety of utilities have had interests in using inforrration technology to bring the efficiency and low operational costs. There is also a trend to integrdte the production, transmission, distribution and management/control of power into one and unified distributed system. To this end, Electric Power Hesearch Institute(EPRI) announced a new standard communication protocol called Inter-Control Center Protocol(ICCP).ICCP specifies the use of Manufacturing Message Specification(MMS) for services required by rccr in application layer and supports the communications between heterogeneous control centers. This paper presents the characteristics of MMS,ICCP and their relationship. Futherrnore, we implement the basic functional blocks of ICCP using MMS services under TCI/IP environments. Finally, we model a simple power system and apply the rccp protocol to this system in a window-based scheme, and finally show the operation and validation of this protocol.