http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
이주희,김창일,백종후,조정호,전명표,정영훈,이영진,이정배,이승대,Lee, Joo-Hee,Kim, Chang-Il,Paik, Jong-Hoo,Cho, Jeong-Ho,Chun, Myoung-Pyo,Jeong, Young-Hun,Lee, Young-Jin,Lee, Jeong-Bae,Lee, Seung-Dae 한국전기전자재료학회 2011 전기전자재료학회논문지 Vol.24 No.3
The osseointegration of dental implant is influenced by many factors such as surface geometry, loading and the amount of bone. Thus, stability of the dental implant should be checked periodically. In order to test the stability of dental implant by using resonance frequency analysis, we designed a structure of transducers and fabricated a piezoelectric devices. Using finite element analysis, the thickness and length of piezoelectric device and transducers were tailorized and the optimized frequency of 10 kHz was obtained. The resonance frequency from simulation analysis and evaluation was estimated to be similar as 10 kHz. The osseointegration was further enhanced with increasing frequency from the evaluation result of the finite element analysis.
이주희,오정민,홍연우,김세기,백종후,이영진,이정배,이승대,Lee, Joo-Hee,Oh, Jung-Min,Hong, Younwoo,Kim, Seiki,Paik, Jonghoo,Lee, Young-Jin,Lee, Jeong-Bae,Lee, Seung-Dae 한국전기전자재료학회 2012 전기전자재료학회논문지 Vol.25 No.12
A piezoelectric ultrasonic bone surgical instrument, usually used to remove the tartar out of teeth or to cut the dentine of the tooth, is a recently popular instrument for dental treatment due to its several merits such as small size, low-electric power and precision control of surgical operation. It has typically two parts of a tip and vibration system which is also composed of head, piezoelectric elements and tail-mass. In order to improve the performance of the instrument, it is important to standardize the size of the vibration system without tip for high performance. In this study, a Finite Element Analysis (FEA) was utilized to optimize the structure of ultrasonic instrument in vibration system. Consequently, this study revealed that influence of several tips on property were minimized and it showed good property at the frequency range of 22~32 kHz.
NASA 워크숍 및 해외 착륙임무에 기반한 달 착륙 후보 지역과 임무에 대한 고찰
이주희,류동영,Lee, Joohee,Rew, Dong-Young 한국우주과학회 2021 우주기술과 응용 Vol.1 No.3
우리나라는 2022년 8월 시험용 달 궤도선을 처음으로 달에 보낼 계획이다. 그리고 제3차 우주개발 진흥 기본계획을 통해서 밝힌 바에 따르면 이후 2030년 이전까지는 달 착륙선을 달에 보낸다는 계획이다. 달 착륙지역 선정에는 착륙선의 임무에 따라 적합한 착륙 지역이 달라질 수 있으며, 따라서 성공적인 달 탐사임무 설계를 위해서는 달 착륙지역에 대한 사전 연구가 반드시 필요하다. 본 논문에서는 2018년 NASA 워크숍에서 제안한 주요 달 착륙 후보지역에 대한 자료를 바탕으로 NASA의 MoonTrek을 이용하여 14개 제안 지역중 주요 지역의 특성을 분석하였다. 그리고 이런 지역이 향후 어떠한 달 착륙 임무에 적합한지 알아보았다. 또한 최근 달 착륙 국가들의 달 착륙 지역과 아르테미스(Artemis) 계획을 통해 달 남극의 중요성에 대해서도 알아 보았다. Korea plans to send a pathfinder lunar orbiter to the Moon for the first time in August 2022. And according to the 3rd Basic Plan for Space Development Promotion, the plan is to send a lunar lander to the Moon before 2030. The selection of the lunar landing area can be varied depending on the lunar lander's mission, therefore preliminary research on the lunar landing sites is essential for a successful lunar exploration mission design. This paper analyzed the characteristics of major regions among 14 proposed regions using NASA's MoonTrek based on the data on the candidate areas for the major moon landing proposed sites by the NASA workshop in 2018. And we looked into what kind of future moon landing missions are suitable for these areas. We also looked at the importance of lunar Antarctica area through the recent lunar landing areas of Moon landing countries and Artemis plan.
이주희,김찬,Lee, Joo-Hee,Kim, Chan 대한지역사회영양학회 2002 대한지역사회영양학회지 Vol.7 No.6
The purpose of this study was to investigate the nutritional intake and dietary habits of women divers in Tongyoung area and to support the guideline for the improvement of their dietary life style by a validation of a Computerized Semi-quantitative Food Frequency Questionaire. Compared to the women at Jeju Island, the Tongyoung divers showed similar heights (154.6 $\pm$ 0.8 cm), weights (53.5 $\pm$ 1.0 kg) and BMIs (23.3 $\pm$0.4) , but they showed especially high levels of body fat (33.8 $\pm$ 0.8) . Their dietary habits showed they usually skipped lunch, but ate too much food at once, which may represent the dietary habits shown by obese people. Over 40% of the divers were taking some nutritious food or complementary food for health, without realizing the efficacy of these foods. The analysis of nutritional intake showed that all of average daily nutrients intakes of those below 50 years were higher than those of the Korean RDA. In the case of those above 50 years, it was shown that the average daily nutrients intakes were also higher than those of the Korean RDA except for energy (94.5%) and calcium (82.1%) . However, some individual divers showed lower nutrients intakes than 75% of RDA for calcium, iron, Vitamin A and Vitamin B$_2$. Also, excessive intakes of phosphorous and sodium could be a dietary problem. There was no correlation between BMI or percentage of body fat and energy, CHO, protein or fat. These results can provide the nutritional information for this special community, women divers, to improve their health.
의치용 인공치아와 의치상용 레진간의 결합강도에 관한 실험적 연구
이주희,김창회,김영수,Lee, Joo-Hee,Kim, Chang-Whe,Kim, Yung-Soo 대한치과보철학회 1996 대한치과보철학회지 Vol.34 No.3
A principal advantage of a plastic tooth over a porcelain tooth should be its ability to bond to the denture base material. But plastic teeth could craze and wear easily, so more abrasion resistant plastic denture teeth have been developed. To resist abrasion, the degree of cross-linking was increased, but bonding to denture base meterial became more difficult. The purpose of this study was to evaluate the bond strength of plastic teeth and abrasion resistant teeth bonded to heat-curing, self-curing and light-curing denture base material. Denture tooth molds were chosen that had a>8mm diameter. The denture teeth was bonded to three denture base materials and then machined to the same dimensions. Three denture base materials were used as control groups. Prior to tensile testing, the specimens were thermocycled between $5^{\circ}C\;and\;55^{\circ}C$ for 1000cycles. Tensile testing was performed on an Instron Universal testing mechine. Experimental group ; plastic teeth(Justi Imperial)+heat-curing resin(Lucitone 199) plastic teeth(Justi Imperial)+light-curing resin(Triad) plastic teeth(Justi Imperial)+self-curing resin(Vertex SC) abrasion resistant teeth(IPN)+heat-curing resin(Lucitone 199) abrasion resistant teeth(IPN)+light-curing resin(Triad) abrasion resistant teeth(IPN)+self-curing resin(Vertex SC) Control group ; heat-curing resin(Lucitone 199) light-curing resin (Triad) self-curing resin(Vertex SC). The results were as follows : 1. The denture teeth bonded to heat-curing resin showed the cohesive failure and those bonded to the other resins showed adhesive failure. 2. Tensile bond strength of the plastic teeth bonded to self-curing resin was not significantly greater than bonded to light-curing resin(p>0.05). 3. Tensile bond strength of the abrasion resistant teeth bonded to self-curing resin was not significantly greater than bonded to light-curing resin(p>0.05). 4. Tensile bond strength of the plastic teeth to self-curing resin was not significantly different from that of the abrasion-resistant teeth(p>0.05). 5. Tensile bond strength of the plastic teeth to light-curing resin was significantly greater than that of the abrasion resistant teeth(p<0.01).
이주희,김연규,이종원,Joohee Lee,Younkyu Kim,Jongwon Lee 한국우주과학회 2022 우주기술과 응용 Vol.2 No.3
There are various systems that allow humans to safely maintain their space exploration missions and lives in completely different environments, such as the International Space Station, the Moon (the closest celestial body to Earth), and Mars (the only planet in the solar system for manned mission in the 2030s). Among them, when it comes to maintaining the basic breathing of humans, the human life support air management system is a key device system. Such an air management system can be used not only for space exploration but also for undersea bases and submarines on Earth where humans reside. The air management system basically consists of an oxygen generation system, a carbon dioxide removal system, and a harmful substance removal system. In this paper, in order to develop an air management system that can be used in an underwater residential platform, the development requirements of a ground test module to be used as an experimental facility were analyzed.