광대역 파장가변 이중 링 공진기 Add/Drop 필터

이동현,이태형,박준오,김수현,정영철,Lee, Dong-Hyun,Lee, Tae-Hyung,Park, Joon-Oh,Kim, Su-Hyun,Chung, Young-Chul 한국광학회 2007 한국광학회지 Vol.18 No.3

본 논문에서는 굴절률 차이가 큰 폴리머 광 도파로를 이용하여 광대역 파장가변이 가능한 이중 링 공진기 Add/Drop 필터를 제작하였다. Add/Drop 필터의 제작시 공정 오차에 둔감한 특성을 갖도록 광 결합기를 설계하였다. 코어와 클래딩의 굴절률은 1550 nm 파장 대역에서 각각 1.51, 1.378로 약 $100{\mu}m$ 정도의 곡률 반경을 가지는 곡선 도파로를 수용할 수 있다. 두 개의 링이 동시에 공진하는 파장 대역에서 Drop 특성은 이웃하는 피크 좌다 약 2.9 dB 이상 높은 특성을 보였다. 이 필터는 반사형 반도체 광증폭기 등과의 하이브리드 집적을 통하여 광대역 파장 가변 레이저 다이오드를 구현하는데 활용할 수 있을 것으로 기대된다. A widely tunable add/drop filter composed of double ring resonators is implemented with high-index-contrast polymer waveguide. To enhance the productivity, directional couplers are designed to have good fabrication tolerance. The refractive indices of the core and cladding in the 1550 nm wavelength are 1.51 and 1.378, respectively. Drop response in comparison with neighborhood peak gets enhanced by more than 2.9 dB at the wavelength where both rings resonate. This filter can be used to build widely tunable laser diode through hybrid-integration with reflective SOA.

대학 공시정보를 활용한 교육국제화역량 인증 여부 예측: 이산선택모형에 의한 대학알리미 공시정보 분석

이동현(Lee, Dong-hyun),조순정(Cho, Soon-jeong) 한국경영교육학회 2020 경영교육연구 Vol.35 No.3

[연구목적] 본 연구는 대학 공시정보를 활용하여 교육국제화역량 인증(IEQAS) 여부를 예측하며, 대학의 인증 유지를 위한 자가 점검에 적합한지 연구 모형을 검증하는데 목적이 있다. [연구방법] 동 연구는 IEQAS 인증․미인증 예측을 위해 2019년 대학알리미 웹사이트에 공개된 138개 사립 대학의 공시정보를 수집했다. 이어, 인증 대학 77개교 및 미인증 대학 61개교 두 집단 간 지표 차이를 검정 후, 5개의 대학경쟁력지표 및 9개의 재정회계지표를 독립 변수로, 2019년 3월에 발표된 IEQAS 인증 결과를 이산형 종속 변수로 설정하여 이산선택모형에 따라 로짓분석과 판별분석을 하였다. [연구결과] 본 연구자들은 t-검정으로 선별한 재학생충원율/신입생충원율/전임교원확보율(이상 대학경쟁력), 학생1인당교육비/교육비환원율/부채비율/법인전임급비율(이상 재정회계)을 연구 모형에 유의한 요인으로 투입했다. 그 결과, 대학경쟁력 지표를 통한 예측력은 로짓분석 71.7%, 판별분석 71.0%로, 재정회계 지표의 경우 로짓분석 70.3%, 판별분석 66.7%의 예측력을 보였다. 동 이산선택모형 내에 공통으로 관여한 유의미한 변수는 재학생충원율, 신입생충원율과 학생1인당교육비로 나타났다. [연구의 시사점] 동 연구는 조직의 부실 여부 예측에 유용한 로짓분석과 판별분석을, 정부의 대학별 공개 자료를 활용하여 IEQAS 인증․미인증 예측에 적용해 본 가치를 지닌다. 본 연구의 이산선택모형은 타당성과 신뢰성이 확인됨으로써, 대학이 손수 IEQAS 인증 유지 점검 시 활용할 수 있으며 대학 평가에 관한 경영교육 실무에 기여할 것이다. [Purpose] Based on a discrete choice model(DCM), this study aims to predict the ‘pass/fail’ of the International Education Quality Assurance (IEQAS) by analyzing publicly opened dataset. Thus, it will enable Korean universities to self-test their IEQAS-related capabilities in a productive manner. [Methodology] This work utilized disclosed data on academyinfo.go.kr in 2019, including a total of 138 private universities from My university competitiveness(MUC), Financial accounting index(FAI); relying on related literature, it proposed two hypotheses and 14 independent variables, followed by conducting logit analysis(LA) and discriminant analysis(DA). [Findings] First, t-tests identified three MUC variables(Levy with enrolled students; Levy with new students; Faculty in full service) and four FAI variables(Educational expenditure; Educational restitution rate; Liability ratio; Corporate transferred money) between 77 IEQAS ‘pass’ group and 61 IEQAS ‘fail’ group in 2019. This DCM presented the following predictive powers: 71.7%-LA vs 71.0%-DA in MUC and 70.3% -LA vs 66.7%-DA in FAI, while Levy with enrolled students, Levy with new students and Educational expenditure worked as keys to predicting the ‘pass/fail’. [Implications] The DCM combining LA/DA can be used for both scholars on the business education area and the IEQAS-related practitioners.

하악 전돌증 환자에서 전산화 단층 촬영을 이용한 하악관의 해부학적 위치에 관한 연구

이동현,김재원,이수연,김재현,안상헌,이상한,장현중,Lee, Dong-Hyun,Kim, Jae-Won,Lee, Su-Youn,Kim, Jae-Hyun,An, Sang-Heon,Lee, Sang-Han,Jang, Hyun-Jung 대한악안면성형재건외과학회 2009 Maxillofacial Plastic Reconstructive Surgery Vol.31 No.6

Purpose: In this study, we analyzed and compared the anatomical position of the mandibular canal in normal occlusion and mandibular prognathism patients. Patients and Methods: Computed tomography image from 58 patients were divided into normal occlusion group and mandibular prognathism group, and each measurement were taken in the each measuring points(2nd premolar, 1st molar, 2nd molar, 3rd molar, ramus). Measurements were statistically analyzed by student's t-test. Results: BC (Thickness of the buccal cortex) value was 2.3~2.7 mm, CB (Distance from the canal to the lingual aspect of the buccal cortex) value was 1.3~4.3 mm, MC (Diameter of the canal) value was 3.2~3.8 mm, LI (Distance from the canal to the lingual aspect of the lingual cortex) value was 2.0~3.7 mm, TM (Thickness of the total mandible) value was 9.5~12.9 mm and CM (Distance from the canal to the inferior border of the mandible) value was 6.9~17.5 mm. Conclusion: In the comparison between two groups, there was statistically significant difference in CB value of 2nd, 3rd molar between normal occlusion and mandibular prognathism, and other value in the rest of the measuring points didn't show statistically significant difference.

소결 온도에 따른 0.98(Na_0.5K_0.5)NbO₃-0.02Li(Sb_0.17Ta_0.83)O₃+0.01wt%ZnO 세라믹스의 압전 특성

이동현,이승환,이성갑,이규탁,이영희,Lee, Dong-Hyun,Lee, Seung-Hwan,Lee, Sung-Gap,Lee, Ku-Tak,Lee, Young-Hie 한국전기전자재료학회 2011 전기전자재료학회논문지 Vol.24 No.7

We studied sintering temperature to enhance the piezoelectric properties of $0.98(Na_{0.5}K_{0.5})NbO_3-0.02Li(Sb_{0.17}Ta_{0.83})O_3$+0.01wt%ZnO (hereafter NKN-LST+ZnO) lead free piezoelectric ceramics. The synthesis and sintering method were the conventional solid state reaction method and sintering was executed at $1,080\sim1,120^{\circ}C$. We found that NKN-LST+ZnO ceramics at optimal sintering temperature showed the improved piezoelectric properties at the optimal sintering temperature. The NKN-LST+ZnO ceramics show good performance with piezoelectric constant $d_{33}$= 153 pC/N sintered at $1,090^{\circ}C$. The results reveal that NKN-LST+ZnO ceramics are promising candidate materials for lead-free piezoelectric application.

오행침(五行鍼)과 육기침(六氣鍼)을 응용한 뇌경색환자 치험 1례

이동현,정영표,김현수,류충열,조명래,채우석,나건호,Lee, Dong-Hyun,Jeong, Yeong-Hyo,Kim, Hyeon-Hu,Ryu, Chung-Ryul,Cho, Myeong-Rae,Chae, Woo-Seok,Na, Gun-Ho 경락경혈학회 2006 Korean Journal of Acupuncture Vol.23 No.1

Objectives : The purpose of this case is to report the improvement after treatment about a patient with cerebral infarction by Sa-Am's Ohaeng-acupuncture and Liuqi-acupuncture. Methods : We treated the patient with acupuncture therapy from 6th September 2004 to 15th November 2004 by reinforcing Dadun(Liv 1) Zusan Li(S36) Quchi(Li 11) and reducing Taibai(Sp 3) on the basis of Etiological Analysis and Differenciation of Endogenous Wind caused by Damp Phlegm and heat. Results .1. Right hemiplegia improved Gr. I to Gr.IV after acupuncture therapy. 2. we interpreted 'reinforcing Dadun(Liv 1) and reducing Taibai(SP 3)'as using Simjeonggyeok in conjunction with Simseunggyeok on the basis of Sa-Am's Ohaeng-acupuncture. 3. we interpreted 'reinforcing Dadun(Liv 1) and reducing Taibai(Sp 3)'as Excreting Dampness in Spleen on the basis of Liuqi-acupuncture. 4. we interpreted 'reinforcing Zusan Li(S 36) and Quchi(Li 11)'as Eliminating Wind-dampness and Menstrual Regulation.

이중 대역 지향성 증가용 박판 주파수 선택적 표면의 설계

이동현,이영주,여준호,박위상,Lee Dong-Hyun,Lee Young-Ju,Yeo Jun-Ho,Mittra Raj,Park Wee-Sang 한국전자파학회 2006 한국전자파학회논문지 Vol.17 No.7

We propose a thin frequency selective surface(FSS) superstrate etched on a substrate for dual-band directivity enhancement, and present a design method of the superstrate. In the proposed new design, two FSS arrays with the same periodicity, but with different alignments are placed above and below a thin dielectric layer to overcome the problem of conventional superstrates for dual band directivity enhancements. Based on the unit-cell simulation, several important parameters that characterize the thin FSS superstrate are investigated, and the procedure for designing such a superstrate is described. We compare the resonant frequencies and the qualify factors of the unit cell with those of three FSS antenna composites with different quality factors, and identify the quality factors which support similar directivity enhancement at the dual-band directivity enhancement. It was found that there is an optimum FSS array size of a superstrate to enhance the directivity most efficiently. Measured results for a fabricated superstrate show a good agreement with the simulated ones. 본 논문에서는 하나의 유전체 층으로 이중 대역 지향성을 증가시킬 수 있는 박판 frequency selective surface (FSS) superstrate를 제안하고 이의 설계 방법을 소개하였다. 제안하는 박판 FSS superstrate는 동일한 주기의 두 FSS 어레이가 하나의 유전층 위 아래로 존재하고, 두 FSS 어레이의 위치에 offset 을 주어 이중 대역 지향성 향상을 위한 기존의 FSS superstrate가 가지는 문제점을 제거하였다. 단위 셀 시뮬레이션을 이용하여 다양한 파라미터의 변화에 따른 특성을 분석하고, 이를 이용하여 제안하는 superstrate의 설계 방법을 제시하였다. 3 가지 다른 quality factor를 가지는 단위 셀과 이를 이용한 복합 안테나의 특성을 비교하여 두 대역에서의 지향성 향상 정도를 유사하게 하는 단위 셀의 quality factor 값을 제시하였다. 이와 함께 효율적으로 지향성을 향상시킬 수 있는 최적의 FSS 어레이 크기를 제시하였다. 제안한 박판 FSS superstrate를 이용한 안테나 복합체를 제작하였으며, 측정된 결과는 시뮬레이션 된 결과와 매우 잘 일치한다.

단말기 T-DMB용 안테나로 사용될 수 있는 Open Stub를 가지는 소형 Two-Wire Helical 안테나

이동현,박세현,김영일,박위상,Lee, Dong-Hyun,Park, Se-Hyun,Kim, Young-Eil,Park, Wee-Sang 한국전자파학회 2007 한국전자파학회논문지 Vol.18 No.2

본 논문에서는 모바일 장치의 T-DMB 안테나로 사용될 수 있는 급전 반대편에 open stub를 가지는 소형 two-wire helical 안테나를 제안하였다. Open stub의 길이를 조절하거나 open stub에 유전 물질을 발라 T-DMB 대역인 200 MHz에서 높이가 8 cm(200 MHz에서 0.053 $\lambda$임)인 안테나의 입력 임피던스를 쉽게 매칭시킬 수 있다. 이 안테나의 unbalanced 모드와 balanced 모드의 등가 회로를 이용하여 이 안테나의 등가 회로를 나타내고, 동작 원리를 설명하였다. 등가 회로의 해석을 토대로 open stub의 영향을 검증했다. 몇 가지 다른 파라미터 값을 가지는 안테나를 제작하였으며, 이 안테나의 $S_{11}$ 및 $S_{21}$을 측정하였다. 제작된 안테나의 임력 임피던스 대역폭($S_{11}{\leq}-10dB$)은 $196{\sim}204$ MHz(8 MHz)로 T-DMB의 한 채널(6 MHz)을 만족한다. 이 안테나의 측정된 $S_{21}$은 -38.6 dB로 동일한 높이의 모노폴 안테나와 open stub를 가지지 않은 two-wire helical 안테나의 $S_{21}$보다 약 17 dB 높다. We have presented a compact two-wire helical antenna adopted an open stub in opposite to a feeding point, which is for a T-DMB antenna of mobile devices. By adjusting the length of the open stub or pasting a dielectric material on the open stub, the input impedance around 200 MHz, bands of the T-DMB, can be easily control, even though the total height of the antenna is less than 8 cm(0.053 $\lambda$ at 200 MHz). The operating mechanism of the antenna is explained by using equivalent circuits of two modes, an unbalanced mode and a balanced mode. Based on the analysis of the equivalent circuits, the effects of using the open stub are validated. Several proposed antennas have been fabricated and measured. One of the fabricated antennas has -10 dB impedance bandwidth of $196{\sim}204$ MHz(8 MHz) whose value covers one channel of the T-DMB(6 MHz). The measured $S_{21}$ of the antenna is -38.6 dB which is about 17 dB higher than that of a monopole antenna whose height is same with the proposed antenna.

게이트 절연막에 사용된 점착층에 대한 영향

이동현,형건우,표상우,김영관,Lee, Dong-Hyun,Hyung, Gun-Woo,Pyo, Sang-Woo,Kim, Young-Kwan 한국전기전자재료학회 2006 전기전자재료학회논문지 Vol.19 No.4

The electrical performances of organic thin-film transistors (OTFTs) have been improved for the last decade. In this paper, it was demonstrated that the electrical characteristics of the organic thin film transistors (OTFTs) were improved by using polymeric material as adhesion layer on gate insulator. We have investigated OTFTs with polyimide adhesion layer which was fabricated by vapor deposition polymerization (VDP) processing and formed by co-deposition of 2,2-bis (3,4-dicarboxyphenyl) hexafluoropropane dianhydride and 4,4'-oxydianiline. It was found that the OTFTs with adhesion layer showed better electrical characteristics than with bare layer because of good matching between semiconductor and gate insulator. Our devices of performance are field effect mobility of $0.4cm^2/Vs$, threshold voltage of -0.8 V and on-off current ratio of $10^6$. In addition, to improve the electrical characteristics of OTFT, we have reduced the thickness of adhesion layer up to a few nanometrs.

애커먼 조향 이동로봇의 주행 안정성을 고려한 원격운용 시스템 설계

이동현,Lee, Dong-Hyun 대한임베디드공학회 2022 대한임베디드공학회논문지 Vol.17 No.2

This paper proposes a 2D joystick and LoRa-based teleoperation system for the Ackermman steering mobile robot. The proposed joystick mapping algorithm reduces the linear speed of the robot when the joystick is steered in the direction of the maximum steering angle in the high-speed driving state of a mobile robot to reduce the risk of rollover. The LoRa-based remote operation system is designed for remote operation of mobile robots that require long range communication with relatively little data transmission and low power. The proposed system is implemented and the experimental results demonstrate the effectiveness of the teleoperation system with respect to the stability of communication strength and the robot motion.

침전법으로 제조된 Mg(OH)₂의 잔류 Na염이 MgO 입자 형성에 미치는 영향

이동현,유승범,김대성,임형미,이승호,Lee, Dong-Hyun,Ryu, Seung-Bom,Kim, Dae-Sung,Lim, Hyung-Mi,Lee, Seung-Ho 한국재료학회 2012 한국재료학회지 Vol.22 No.1

The particle size of MgO was examined as a function of the Na content in $Mg(OH)_2$ powders and the calcination temperature. $Mg(OH)_2$ suspension was obtained by dropwise precipitation of $Mg(NO_3)_2{\cdot}6H_2O$ and NaOH solutions. The suspension was diluted by varying the dilution volume ratio of distilled water to $Mg(OH)_2$ suspension to change the Na salt concentration in the suspension. $Mg(OH)_2$ slurry was filtered and dried at $60^{\circ}C$ under vacuum, and then its $Mg(OH)_2$ powder was calcined to produce MgO with different amount of Na content at $500\sim900^{\circ}C$ under air. Investigation of the physical and chemical properties of the various MgO powders with dilution ratio and calcination temperature variation was done by X-ray diffraction, transmission electron microscopy, BET specific surface area and thermal gravimetric analysis. It was observed that MgO particle size could depend on the condition of calcination temperature and dilution ratio of the $Mg(OH)_2$ suspension. The particle size of the MgO depends on the Na content remaining in the $Mg(OH)_2$ powder, which powder was prepared by changing the dilution ratio of the $Mg(OH)_2$ suspension. This change increased as the calcination temperature increased and decreased as the dilution ratio increased. The growth of MgO particle size according to the increase of temperature was more effective when there was a relatively high content of Na. The increase of Na content lowered the temperature at which decomposition of $Mg(OH)_2$ to MgO took place, thereby promoting the crystal growth of MgO.