http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
수증기 메탄 개질 반응을 이용한 수소 생산용 Ni-Cr-Al 다공체 지지 촉매의 제조, 기계적 안정성 및 수소 환원 효율
김규식,강태훈,공만식,박만호,윤중열,안지혜,이기안,Kim, Kyu-Sik,Kang, Tae-Hoon,Kong, Man Sik,Park, Man-Ho,Yun, Jung-Yeul,Ahn, Ji Hye,Lee, Kee-Ahn 한국분말재료학회 (*구 분말야금학회) 2021 한국분말재료학회지 (KPMI) Vol.28 No.3
Ni-Cr-Al metal-foam-supported catalysts for steam methane reforming (SMR) are manufactured by applying a catalytic Ni/Al<sub>2</sub>O<sub>3</sub> sol-gel coating to powder alloyed metallic foam. The structure, microstructure, mechanical stability, and hydrogen yield efficiency of the obtained catalysts are evaluated. The structural and microstructural characteristics show that the catalyst is well coated on the open-pore Ni-Cr-Al foam without cracks or spallation. The measured compressive yield strengths are 2-3 MPa at room temperature and 1.5-2.2 MPa at 750℃ regardless of sample size. The specimens exhibit a weight loss of up to 9-10% at elevated temperature owing to the spallation of the Ni/Al<sub>2</sub>O<sub>3</sub> catalyst. However, the metal-foam-supported catalyst appears to have higher mechanical stability than ceramic pellet catalysts. In SMR simulations tests, a methane conversion ratio of up to 96% is obtained with a high hydrogen yield efficiency of 82%.
분말 합금법으로 제조된 Fe-Cr-Al 금속 다공체의 구조, 미세조직 및 기계적 특성
김규식,강병훈,박만호,윤중열,이기안,Kim, Kyu-Sik,Kang, Byeong-Hoon,Park, Man-Ho,Yun, Jung-Yeul,Lee, Kee-Ahn 한국분말야금학회 2020 한국분말재료학회지 (KPMI) Vol.27 No.1
The Fe-22wt.%Cr-6wt.%Al foams were fabricated via the powder alloying process in this study. The structural characteristics, microstructure, and mechanical properties of Fe-Cr-Al foams with different average pore sizes were investigated. Result of the structural analysis shows that the average pore sizes were measured as 474 ㎛ (450 foam) and 1220 ㎛ (1200 foam). Regardless of the pore size, Fe-Cr-Al foams had a Weaire-Phelan bubble structure, and α-ferrite was the major constituent phase. Tensile and compressive tests were conducted with an initial strain rate of 10<sup>-3</sup>/s. Tensile yield strengths were 3.4 MPa (450 foam) and 1.4 MPa (1200 foam). Note that the total elongation of 1200 foam was higher than that of 450 foam. Furthermore, their compressive yield strengths were 2.5 MPa (450 foam) and 1.1 MPa (1200 foam), respectively. Different compressive deformation behaviors according to the pore sizes of the Fe-Cr-Al foams were characterized: strain hardening for the 450 foam and constant flow stress after a slight stress drop for the 1200 foam. The effect of structural characteristics on the mechanical properties was also discussed.
이하선 부위에 발생한 Angiolymphoid Hyperplasia with Eosinophilia
김규식,노혜일,오현진,천병준,조정해,강석진,Kim, Que-Chic,Noh, He-Il,Auo, Hyeon-Jin,Chun, Byung-Joon,Cho, Jung-Hae,Kang, Seok-Jin 대한기관식도과학회 2002 大韓氣管食道科學會誌 Vol.8 No.2
Angiolymphoid hyperplasia with eosinophilia(ALHE) is an uncommon idiopathic condition that presents with isolatedor grouped cutaneous plaques or nodules of the head and neck. Extracutaneous involvement is rare. ALHE is a distinct pathologic entity marked by a proliferation of blood vessels with distinctive large endothelial cells accompanied by a characteristic inflammatory infiltrate that includes eosinophils. The lesion is benign but may be persistent and difficult to eradicate. The authors have recently experiecned a case of angiolymphoid hyperplasia with eosinophilia in a 52-year-old male who had a painless enlarging mass in his right preauricular area and external ear canal for several years. We present this case with the review of literatures.
김규식(Gyu-Sik Kim),정해천(Hae-Chun Jung) 전력전자학회 1997 전력전자학술대회 논문집 Vol.1997 No.-
Along with the rapid growth in microelectronics and power electronics technologies, various advanced control methods have been successfully implemented in real time and shown to be useful in controlling CO₂arc welding systems with high dynamic performance. In this paper, the slope of welding currents is controlled not to be so high in the case of short circuit welding mode. This results in less spatter. In addition, the data-base is constructed for the optimal welding conditions.
金奎植(Gyu-Sik Kim) 대한전기학회 2007 전기학회논문지 Vol.56 No.3
A closed-loop sensorless stroke control system for a linear compressor has been designed. The motor parameters are identified as a function of the piston position and the motor current. They are stored in ROM table and used later for the accurate estimation of piston position. Also it was attempted to approximate the identified motor parameters to the Znd-order surface functions. The 2nd-order surface functions are divided into 2 or 4 sub-sections for more precise identification of motor parameters. Some experimental results are given in order to show the feasibility of the proposed control schemes for linear compressors.
김규식(Gyu-Sik Kim),이병석(ByungSeok Lee),이준화(JoonHwa Lee),김조천(Jo-Chun Kim) 대한전기학회 2008 대한전기학회 학술대회 논문집 Vol.2008 No.10
본 논문에서는 하루에 수백만 명이 이용하는 지하철 역사내의 환경 관리를 유비쿼터스(Ubiquitous) 기술을 적용하여 실질적이고 효과적으로 실행하는 방안을 재안하고자 한다. 지하철 역사는 지하라는 특수한 환경이기 때문에 외부의 신선한 공기를 유입하여 역사내의 공기질을 쾌적하게 유지해야할 필요가 있다. 또한 실내 공기질을 오염시키는 환경가스나 미세먼지 등의 오염도에 대해서도 지속적으로 감시하여야 한다. 이를 위해 설치가 간편하고 소형의 측정 장치를 지하역사내의 주요 지점에 설치하여 오염 물질을 측정하고 그 결과 데이터를 모으는 집중기(Collector)를 운영하여 최종적으로 측정 데이터를 중앙 서버까지 전송할 수 있다면 지하철 관리자에 의한 지하역사내의 오염물질을 효과적으로 관리 · 감독하는 종합적인 지하철 환경 관리시스템의 운영이 가능할 것으로 판단된다.