http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
김규식(Gyu-Sik Kim),오준태(Joon-Tae Oh),김희식(Hie Sik Kim),김조천(Jo-Chun Kim) 대한전자공학회 2009 電子工學會論文誌-SC (System and control) Vol.46 No.2
본 연구에서는 비분산 적외선 방식을 이용한 일산화탄소, 이산화탄소 듀얼 센서 모듈을 실현한다. 비분산 적외선 방식은 가스분자가 특정 파장의 적외선을 흡수하는 특성을 이용하여 가스의 적외선 흡수도를 측정하여 농도로 환산하는 방식이다. 비분산 적외선 방식은 수명이 길고 정밀도가 높아 기존의 접촉식(화학식) 센서에 비해 우수한 특성을 가지고 있다. 중요한 기술은 NDIR의 핵심 부분인 광 공동의 설계 기술과 센서의 성능을 최종 결정짓는 농도-온도 교정 기술이다. 현재까지 개발된 광공동 기술은 CO2센서의 단일 센서 방식이었다. 본 연구에서는 이 기술을 접목한 일산화탄소까지 동시에 측정할 수 있는 광공동기술과 교정기술을 연구 개발하여 하나의 광 공동으로 이산화탄소와 일산화탄소를 동시에 측정 할 수 있는 고기능 센서를 실현하는 것이다. In this paper we discuss about the practical implementation of a combined CO and CO2 dual sensor module that is adapted by NDIR (Non-Dispersive Infrared) method that measures the absorbance of gas like CO and CO2 by using gas particles' characteristics that absorb specific wave lengths of infrared ray. NDIR has a long life time, excellent measurement and precision compared to the existing contact types or chemical types of CO2 sensors. Since optical cavity technology that had been developed until now can measure CO2 only we research and develop an optimal optical cavity design and density-temperature calibration technologies that can measure CO and CO2 at the same time and is important to decide the performance of the sensor module according to well-designed wave guides of the different length.
김규식(Gyu-Sik Kim),오준태(Joon-Tae Oh),김조천(Jo-Chun Kim) 대한전기학회 2008 대한전기학회 학술대회 논문집 Vol.2008 No.10
본 연구에서는 비분산 적외선 방식을 이용한 일산화탄소, 이산화탄소 듀얼 센서 모듈을 실현한다. 비분산 적외선 방식은 가스분자가 특정 파장의 적외선을 흡수하는 특성을 이용하여 가스의 적외선 흡수도를 측정하여 농도로 환산하는 방식이다. 비분산 적외선 방식은 수명이 길고 정밀도가 높아 기존의 접촉식(화학식) 센서에 비해 우수한 특성을 가지고 있다. 중요한 기술은 NDIR의 핵심 부분인 광 공동의 설계 기술과 센서의 성능을 최종 결정짓는 농도온도 교정 기술이다. 현재까지 개발된 광공동 기술은 CO₂센서의 단일 센서 방식이었다. 본 연구에서는 이 기술을 접목한 일산화탄소까지 동시에 측정할 수 있는 광 공동기술과 교정기술을 연구개발하여 하나의 광 공동으로 이산화타소와 일산화탄소를 동시에 측정 할 수 있는 고기능 센서를 실현하는 것이다.
김규식(Gyu-Sik Kim),정해천(Hae-Chun Jung) 전력전자학회 1997 전력전자학술대회 논문집 Vol.1997 No.-
Along with the rapid growth in microelectronics and power electronics technologies, various advanced control methods have been successfully implemented in real time and shown to be useful in controlling CO₂arc welding systems with high dynamic performance. In this paper, the slope of welding currents is controlled not to be so high in the case of short circuit welding mode. This results in less spatter. In addition, the data-base is constructed for the optimal welding conditions.
플라즈마 발생용 전원장치의 LCD 패널 세정효과에 관한 연구
김규식(Gyu-Sik Kim) 대한전자공학회 2008 電子工學會論文誌-SC (System and control) Vol.45 No.5
UV 램프 시스템은 오랫동안 TFT LCD 나 PDP 의 패널 세정에 사용되어 왔으나, 저렴한 가격의 고성능 세정에 대한 필요성 때문에 고전압 플라즈마 세정에 대한 기술이 개발되고 그 성능이 향상되어 왔다. 장벽방전 (barrier discharge) 혹은 무성방전 (silent discharge) 으로 불리는 유전체 장벽 방전 (Dielectric-Barrier Discharges, DBDs) 는 오존 발생기에 주로 이용되어왔다. 본 논문에서는 LCD 세정용으로 6kW 급 고전압 플라즈마 발생장치를 구현하였다. 3상 입력전압을 직류로 정류한 뒤, 인버터 시스템에 의해 고주파 펄스로 바꾸고 고압 트랜스퍼머를 거쳐 다이오드로 정류한다. 마지막으로, 고압 플라즈마를 발생시키기 위해 양방향 고전압 펄스 스위칭회로가 사용되었다. 실험을 통해 상압 플라즈마가 LCD 패널 세정에 크게 유용함을 보였다. UV lamp systems have been used for cleaning of display panels of TFT LCD or Plasma Display Panel (PDP). However, the needs for high efficient cleaning and low cost made high voltage plasma cleaning techniques to be developed and to be improved. Dielectric-Barrier Discharges (DBDs), also referred to as barrier discharges or silent discharges have been exclusively related to ozone generation for a long time. In this paper, a 6kW high voltage plasma power supply system was developed for LCD cleaning. The 3-phase input voltage is rectified and then inverter system is used to make a high frequency pulse train, which is rectified after passing through a high-power transformer. Finally, bi-directional high voltage pulse switching circuits are used to generate the high voltage plasma. Some experimental results showed the usefulness of atmospheric plasma for LCD panel cleaning.
김규식(Gyu-Sik Kim),나형욱(Hyeong-Uk Na),강상혁(Sang-Hyuk Kang) 대한전기학회 2008 대한전기학회 학술대회 논문집 Vol.2008 No.10
광학입자 계수기는 실내환경, 대기오염 및 클린룸 등 입자크기분포 측정장비로 가장 많이 사용된다. 광학입자 계수기에 샘플링된 입자는 관측체적 내로 1개씩 통과 하며 산란된 빛은 집광장치에 의해 광검출기로 전달한다. 이때 산란광의 양에 비례하여 전압(전류)의 세기로 변환하여 전기적 신호로서 나타나는 Pulse의 높이는 Calibration Data에 따라 입자의 크기로 변환하고 Pulse의 개수는 입자의 개수로 표시된다. 입자의 크기와 개수를 이용하여 부피로 환산 한 후 부유하는 입자의 평균 밀도를 이용하여 질량으로 환산시킨다. 이렇게 측정된 미세먼지 농도는 ZigBee통신을 사용하여 구축한 시스템을 통해서 중앙부에서 실시간으로 먼지 농도를 알 수 있다. 특히 멀티홉 기능을 이용하여 건물 구조가 복잡하거나 층간의 통신, 꺾인 부분이나 사무실 안과 밖과 같은 무선 통신이 원할 하지 못하는 경우를 극복하여 미세먼지의 농도 값을 측정 할 수도 있다.
金奎植(Gyu-Sik Kim) 대한전기학회 2007 전기학회논문지 Vol.56 No.3
A closed-loop sensorless stroke control system for a linear compressor has been designed. The motor parameters are identified as a function of the piston position and the motor current. They are stored in ROM table and used later for the accurate estimation of piston position. Also it was attempted to approximate the identified motor parameters to the Znd-order surface functions. The 2nd-order surface functions are divided into 2 or 4 sub-sections for more precise identification of motor parameters. Some experimental results are given in order to show the feasibility of the proposed control schemes for linear compressors.