Microstructure evolution and enhanced vacuum tribological performance of Ni-doped WS₂ composite coating

Xu, Shu-Sheng,Weng, Li-Jun,Liu, Yu-Zhen,Kang, Kyeong-Hee,Kim, Chang-Lae,Kim, Dae-Eun Elsevier Sequoia 2017 Surface & coatings technology Vol.325 No.-

<P><B>Abstract</B></P> <P>Ni-doped WS<SUB>2</SUB> composite coatings with various Ni contents were co-deposited using a radio frequency sputtering system on silicon wafer and AISI 440C stainless steel substrates. The microstructural characteristics of the WS<SUB>2</SUB>-Ni composite coatings and their tribological properties in vacuum were assessed. During introduction of Ni dopant in the WS<SUB>2</SUB>-Ni composite coating the sulfur/tungsten (S/W) ratio in the coating increased due to reduced preferential resputtering of sulfur atoms in the growing coating. The microstructure of the WS<SUB>2</SUB>-Ni composite coating varied from a fine columnar structure for Ni content equal to or less than 7.7at.% to a featureless structure as the Ni content increased further. The Ni dopant inhibited the growth of the coarse columnar WS<SUB>2</SUB> platelets which was accompanied by nanocrystallization and amorphization of the composite coating structure. WS<SUB>2</SUB>-Ni composite coatings with fine columnar structure exhibited relatively low hardness but showed a high tendency to form a lubricating transfer layer. It also demonstrated low brittleness and prolonged wear life in vacuum condition compared to coatings with dense featureless structure. The variation in tribological performance between the composite coatings resulted from the different wear mechanisms associated with their distinct microstructures.</P> <P><B>Highlights</B></P> <P> <UL> <LI> Microstructure of WS<SUB>2</SUB> coating was modified by incorporating Ni as a dopant. </LI> <LI> The introduction of Ni increased the S/W ratio of the WS<SUB>2</SUB> composite coating. </LI> <LI> High Ni content in the WS<SUB>2</SUB> coating led to high brittleness and low wear resistance. </LI> <LI> WS<SUB>2</SUB>–5at.% Ni coating showed 5 times longer wear life than pure WS<SUB>2</SUB> film in vacuum. </LI> <LI> Superior tribological properties were attributed to transfer layer and high hardness. </LI> </UL> </P> <P><B>Graphical abstract</B></P> <P>[DISPLAY OMISSION]</P>

Characteristics of 240 Chinese Father-child Pairs with Malignant Disease

Liu, Ju,Li, Ni,Chang, Sheng,Xu, Zhi-Jian,Zhang, Kai Asian Pacific Journal of Cancer Prevention 2013 Asian Pacific journal of cancer prevention Vol.14 No.11

To obtain a screening and early detection reference for individuals who have a family history of cancer on the paternal side, we collected and analyzed data from 240 pairs in which both fathers and their children were diagnosed with cancer. Disease categories of fathers and sons were similar to that of the general population of China, whereas daughters were different from general female population with high incidence of breast cancer and gynecological cancer. Sons were more likely than daughters to have the same type of cancer, or to have cancer in the same organ system as their fathers (P < 0.0001). Sons and daughters developed malignant diseases 11 and 16 years earlier than their fathers, respectively (P < 0.0001 for both sons and daughters). Daughters developed malignant diseases 5 years earlier than sons (P < 0.0001). Men with a family history of malignant tumors on the paternal side should be screened for malignancies from the age of 45 years, or 11 years earlier than the age of their fathers' diagnosis, and women should be screened from the age of 40 years, or 16 years earlier than the age at which their fathers were diagnosed with cancer. Lung cancer should be investigated in both men and women, whilst screening should focus on cancer of the digestive system in men and on breast and gynecological cancer (ovary, uterine and cervical cancer) in women.

A INTERGRATED SYSTEM OF CAD . CAM AND MIS IN PLATES CUTTING (CADMM)

Qing, Zhang Yao,Sheng, Xu Chang 대한전자공학회 1992 HICEC:Harbin International Conference on Electroni Vol.1 No.1

This paper introduces the structure, function, model and implementing of the CADMM system. The integrated importance is transmitting of interface information. The CADMM system is a preliminary attempt in application of CIMS (Computer Intergrated Manufacturing System).

SMC Reliable Design for T-S Model-Based Systems

Yew-Wen Liang,Sheng-Dong Xu,Der-Cherng Liaw,Cheng-Chang Chen,Li-Wei Ting 제어로봇시스템학회 2009 제어로봇시스템학회 국제학술대회 논문집 Vol.2009 No.8

This paper studies the robust reliable control issues based on the Takagi-Sugeno (T-S) fuzzy system modeling method and the sliding mode control (SMC) technique. The combined scheme is shown to have the merits of both approaches. It not only alleviates the on-line computational burden by using the T-S fuzzy system model to approximate the original nonlinear one (since most of the system parameters of the T-S model can be computed off-line) but it also preserves the advantages of rapid response and robustness of the SMC schemes. Moreover, the combined scheme does not require on-line computation of any nonlinear term of the original dynamics and the increase in the partition number of the region of premise variables does not create extra on-line computational burdens for the scheme. Under the design, the control mission can continue safely without prompt external support even when the susceptible actuators fail to operate. The proposed analytical results are also applied to the attitude control of a spacecraft. Simulation results demonstrate the benefits of the proposed scheme.

A INTERGRATED SYSTEM OF CAD . CAM AND MIS IN PLATES CUTTING ( CADMM )

Zhang Yao Qing,Xu Chang Sheng 대한전자공학회 1992 대한전자공학회 Conference Vol.1992 No.2

Photoluminescent Properties of Eu(III) in the Composite Heterocyclic Ligands/Crown Ether Systems

Liu, Hong Guo,Jang, Ki-Wan,Feng, Xu Sheng,Kim, Chang-Dae,Yoo, Young-Jae,Lee, Yong-Ill Korean Chemical Society 2005 Bulletin of the Korean Chemical Society Vol.26 No.12

Composite systems of $Eu(phen)_2Cl_3{(H_2O)}_2$, Eu(DN-bpy)$(phen)Cl_3{(H_2O)}_2$ and Eu(DB-bpy)$(phen)Cl_3{(H_2O)}_2$ (DNbpy: $4,4^\prime$-Dinonyl-$2,2^\prime$-dipyridyl; DB-bpy: $4,4^\prime$-Di-tert-butyl-$2,2^\prime$-dipyridyl) with crown ethers of Benzo-15-crown-5 (B15C5), Benzo-18-crown-6 (B18C6), 18-crown-6 (18C6), Dibenzo-18-crown-6 (DB18C6) and Dibenzo-24-crown-8 (DB24C8) were fabricated successfully and characterized by using photoluminescent spectroscopy and luminescent lifetime measurements. All composites formed show high luminescence mainly in red region. It was found that the heterocyclic ligands such as phen, DN-bpy and DB-bpy as well as the crown ethers have great influences on the photoluminescent properties of $Eu^{3+}$ ion. The environment around $Eu^{3+}$ ion in the composite systems changes greatly,presumably the variation of the first coordination sphere. The $Eu^{3+}$ ion occupies higher symmetrical environment and in more than one kind of symmetrical site in the composite systems studied in this work.

Border Control—A Membrane-Linked Interactome of <i>Arabidopsis</i>

Jones, Alexander M.,Xuan, Yuanhu,Xu, Meng,Wang, Rui-Sheng,Ho, Cheng-Hsun,Lalonde, Sylvie,You, Chang Hun,Sardi, Maria I.,Parsa, Saman A.,Smith-Valle, Erika,Su, Tianying,Frazer, Keith A.,Pilot, Guillaum American Association for the Advancement of Scienc 2014 Science Vol.344 No.6185

<P>Cellular membranes act as signaling platforms and control solute transport. Membrane receptors, transporters, and enzymes communicate with intracellular processes through protein-protein interactions. Using a split-ubiquitin yeast two-hybrid screen that covers a test-space of 6.4 x 10(6) pairs, we identified 12,102 membrane/signaling protein interactions from Arabidopsis. Besides confirmation of expected interactions such as heterotrimeric G protein subunit interactions and aquaporin oligomerization, >99% of the interactions were previously unknown. Interactions were confirmed at a rate of 32% in orthogonal in planta split-green flourescent protein interaction assays, which was statistically indistinguishable from the confirmation rate for known interactions collected from literature (38%). Regulatory associations in membrane protein trafficking, turnover, and phosphorylation include regulation of potassium channel activity through abscisic acid signaling, transporter activity by a WNK kinase, and a brassinolide receptor kinase by trafficking-related proteins. These examples underscore the utility of the membrane/signaling protein interaction network for gene discovery and hypothesis generation in plants and other organisms.</P>

pH and Redox Dual Stimuli-Responsive Injectable Hydrogels Based on Carboxymethyl Cellulose Derivatives

Yueqin Shen,Xian Li,Yawen Huang,Guanjun Chang,Ke Cao,Junxiao Yang,Renyi Zhang,Xueying Sheng,Xu Ye 한국고분자학회 2016 Macromolecular Research Vol.24 No.7

pH and redox dual stimuli-responsive injectable hydrogels were prepared by cross-linking oxidized carboxymethyl cellulose (oxi-CMC) with 3,3'-dithiobis (propionohydrazide) (DTP) via Schiff base reaction under physiological condition. The hydrogels showed good performance such as tunable gelling time, appropriate rheology properties, high swelling ratio and low degradation rate. In vitro release studies confirmed that bovine serum albumin (BSA) as a model drug exhibited a sustainable release at pH 7.4 and an accelerated release under a lower pH 5.0 and/or reducing environments. The results signified that oxi-CMC/DTP hydrogels could be an attractive candidate for drug delivery system, tissue engineering or cell scaffold materials.

of Midcourse Guidance Laws via a Combination of Fuzzy and SMC Approaches

Yew-Wen Liang,Chun-Hone Chen,Der-Cherng Liaw,Shih-Tse Chang,Sheng-Dong Xu 제어·로봇·시스템학회 2010 International Journal of Control, Automation, and Vol.8 No.2

Issues regarding the design of midcourse guidance laws for antimissiles are addressed. The antimissile is expected to be guided to a place with a desired direction, where a ballistic missile is predicted to pass in the reverse direction, so that the target can be easily found and locked for terminal interception. The predicted location and direction of a ballistic missile may vary with time, due to information update using a trajectory prediction algorithm. To fulfill the guidance performance, the guidance laws are designed by combining the Takagi-Sugeno (T-S) fuzzy approach and the Sliding Mode Control (SMC) technique. Under the designed guidance law, it is shown that the antimissile is able to be efficiently guided to a specified location and direction, even when the existence of uncertainties and disturbances.

Morphology control of mesoporous Cu₂O by reductants and its photocatalytic activity

Chu, Xiao-Zhong,Cheng, Zhi-Peng,Zhao, Yi-Jiang,Xu, Ji-Ming,Li, Mei-Sheng,Hu, Lei,Zhou, Shou-Yong,Wu, Fei-Yue,Lee, Chang-Ha Elsevier 2017 CERAMICS INTERNATIONAL Vol.43 No.11

<P><B>Abstract</B></P> <P>Mesoporous Cu<SUB>2</SUB>O particles with different morphologies were synthesized via simple one-pot reactions. Effects of reducing agents, dispersant, template, and temperature on the <B>structure</B> of the prepared materials were investigated. Mesoporous flower-shaped Cu<SUB>2</SUB>O materials were obtained at 70℃ using glucose <B>as a reductant</B>. Different hollow microsphere shapes of Cu<SUB>2</SUB>O could be prepared at 40℃ using <B>another type of reductant, ascorbic acid</B>. The results indicated that the uniform morphology of synthesized Cu<SUB>2</SUB>O with mesopores presented a maximum specific surface area of 45.3m<SUP>2</SUP>/g. Furthermore, the as-prepared Cu<SUB>2</SUB>O particles showed good photodegradation efficiencies of methyl orange in the range of 86.0–93.7%, depending on their morphologies.</P>