http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
PCB 및 패키징 공정에서의 도금 시뮬레이션 기술 적용
이규환,Lee, Kyu Hwan 한국마이크로전자및패키징학회 2012 마이크로전자 및 패키징학회지 Vol.19 No.3
Electroplating technology is widely used in semiconductor microelectronic industry. With the development of semiconductor integrated circuit to high density and light-small scale, Extremely high quality and plated uniformity of the deposited metals are needed. Simulation technique can help to obtain better plating results. Although a few plating simulation softwares have been commercialized, plating simulation is not widely prevalent in Korea. In this paper, principle of electroplating and mathematical modeling of plating simulation are discussed. Also introduced are some cases enhancing plating thickness uniformity on leadframe, PCB and wafer by using plating simulation.
RC 대비 FRP 보강근을 적용한 단보강 콘크리트보의 휨성능 평가
이규환 ( Lee Kyu-hwan ),손병직 ( Son Byung-jik ) 한국복합신소재구조학회 2022 복합신소재구조학회논문집 Vol.13 No.5
본 연구는 콘크리트구조기준(KDS 14-2021)을 적용한 RC보와 ACI 440.1R-15를 적용한 FRP 콘크리트의 비교 연구를 수행하였다. 파라미터 변수로 피복두께, FRP의 탄성계수 및 극한변형률 그리고 보강량 4가지로 설정하여 비교, 분석을 수행하였다. 파라미터 연구 분석 결과 FRP의 탄성계수와 극한 변형률이 클수록 FRP 콘크리트의 휨성능이 우수하지만, 극한 응력이 동일할 때 극한 변형률보다 탄성계수를 크게 하는 것이 유리하다. FRP 콘크리트가 인장지배 단면이나 변화구간 일 때 극한 변형률 증가에 휨성능이 비례해서 증가하지만 압축지배 단면일 경우에는 극한 변형률이 증가해도 휨성능은 증가하지 않는다. 또한, FRP 콘크리트는 최소 피복두께가 필요하지 않아 추가적인 휨성능이 17∼33% 증진 효과가 나타났다. Here, a comparative study was conducted between RC beams to which the concrete structure standard (KDS 14-2021) was applied and FRP concrete to which ACI 440.1R-15 was applied. Comparison and analysis were performed by setting the cover thickness, FRP’s elastic modulus and ultimate strain, and reinforcement amount as parameter variables. The result of the parameter study analysis suggest that the greater the elastic modulus and ultimate strain of FRP, the better the bending performance of FRP concrete. However, when the extreme stress is the same, it is advantageous to make the elastic modulus larger than the extreme strain. When FRP concrete is a tension-controlled section or a transition zone, the bending performance increases in proportion to the increase in ultimate strain; however, in the case of a compression-controlled section, the bending performance does not increase even if the ultimate strain increases. In addition, since FRP concrete does not require a minimum cover thickness, additional flexural performance is improved by 17%-33%.
서울시 자치구간 지역격차에 관한 연구 : 강남 3구와 강북 3구의 비교
이규환(Kyu Hwan Lee),서승제(Seung Je Seo) 한국공공관리학회 2009 한국공공관리학보 Vol.23 No.4
본 연구는 서울의 강남 3구와 강북 3구를 대상으로 지역 격차실태의 정도와 1995년과 2007년에 걸친 변화를 분석하였다. 분석결과, 전반적으로 강남 3구의 인구이동이 강북 3구에 비해 활발하였고, 강남 3구와 강북 3구의 재정자립도가 악화되었고, 강남3구와 강북 3구의 재정자립도 격차는 더 커지고 있었고, 강남 3구의 폐기물 처리량이 강북 3구에 비해 급격히 증가하였고, 인구 천명당 폐기물 처리량도 강남 3구가 강북 3구의 3배에 이르렀으며, 최근에 강북 3구의 아파트 증가가 높았고, 강남 3구의 자가주택 비중은 약간의 감소하였으나 강북 3구는 상당히 증가하였고, 강남 3구의 병상수와 의료인력수가 강북 3구에 비해 월등하였고, 사설학원수에서 절대적인 격차가 나타났다. This study analyzed the extent and changes in the intra-regional disparity between the major 3 Gangnam districts (represented by the three districts: Seocho, Gangnam, and Songpa) and the major 3 Gangbuk districts (represented by the three districts: Gangbuk, Dobong, and Nowon), using data for the period between 1995 and 2007. The analysis results are the following: Overall, the population shift in the major 3 Gangnam districts was shown to be more remarkable than that in the major 3 Gangbuk districts. It was revealed that the levels of financial self-sufficiency of both districts got worse, while the disparity in financial self-sufficiency between the two groups of districts was widening over the period. The amount of waste disposition in the Gangnam districts increased more rapidly than that in the Gangbuk districts and, in terms of waste disposition per 1,000 persons, the level for the major 3 Gangnam districts stood three times higher than that for the major 3 Gangbuk districts. In types of dwellings, the portion of apartment buildings for the major 3 Gangbuck districts notably increased, and for the rate of home ownership, it slightly shrinked in the major 3 Gangnam districts, while it substantially increased in the major 3 Gangbuk districts. The numbers of hospital beds and medical personnel in the major 3 Gangnam districts were far higher than those in the major 3 Gangbuk districts, while in the number of private educational institutions a great difference was shown between the two groups of districts.
위성 통신에서 신뢰성 향상을 위한 랜덤 선형 네트워크 코딩 기술
이규환(Kyu-Hwan Lee),김재현(Jae-Hyun Kim) 한국통신학회 2013 韓國通信學會論文誌 Vol.38 No.9(네트워크)
본 논문에서는 위성 통신에서 신뢰성 향상을 위한 랜덤 선형 네트워크 코딩 적용 기술을 제안한다. 제안하는 프로토콜에서는 PEP (Performance Enhancement Proxy)에서 네트워크 코딩된 여분의 패킷을 전송하여 만약 데이터 패킷이 무선 채널 에러에 의해 손실되었다 할지라도 복구 할 수 있다. 또한 본 논문에서는 제안한 프로토콜을 위성 통신에 적용했을 때의 TCP 처리율 수학적 모델을 제시하고 제안한 프로토콜의 성능을 평가했다. 성능 평가 결과, 제안하는 프로토콜은 발신 측 PEP에서 여분의 네트워크 코딩된 패킷을 전송하고 수신 측 PEP에서 여분의 네트워크 코딩된 패킷을 이용하여 손실된 패킷을 복구하기 때문에 패킷 손실률을 감소시켜 기존 TCP보다 처리율 측면에서 우수한 성능을 나타냈다. In this paper, we propose a method for applying random linear network coding in satellite communication to improve reliability. In the proposed protocol, network-coded redundancy (NC-R) packets are transmitted in the PEP (Performance Enhancement Proxy). Therefore, if data packets is lost by wireless channel error, they can be recovered by NC-R packets. We also develop the TCP performance model of the proposed protocol and evaluate the performance of the proposed protocol. In the simulation results, It is shown that the proposed protocol can improve the TCP throughput as compared with that of the conventional TCP because the NC-R packets is sent by the sender-side PEP and the receiver-side PEP use these packets to recover the lost packets ,resulting in reducing the packet loss in TCP.