Development of Dilated Esophagus, Sigmoid Esophagus, and Esophageal Diverticulum in Patients With Achalasia: Japan Achalasia Multicenter Study

Hiroki Sato,Yusuke Fujiyoshi,Hirofumi Abe,Hironari Shiwaku,Junya Shiota,Chiaki Sato,Hiroyuki Sakae,Masaki Ominami,Yoshitaka Hata,Hisashi Fukuda,Ryo Ogawa,Jun Nakamura,Tetsuya Tatsuta,Yuichiro Ikebuchi 대한소화기 기능성질환∙운동학회 2022 Journal of Neurogastroenterology and Motility (JNM Vol.28 No.2

Background/AimsPatients with achalasia-related esophageal motility disorders (AEMDs) frequently present with dilated and sigmoid esophagus, and develop esophageal diverticulum (ED), although the prevalence and patients characteristics require further elucidation. MethodsWe conducted a multicenter cohort study of 3707 patients with AEMDs from 14 facilities in Japan. Esophagography on 3682 patients were analyzed. ResultsStraight (n = 2798), sigmoid (n = 684), and advanced sigmoid esophagus (n = 200) were diagnosed. Multivariate analysis revealed that long disease duration, advanced age, obesity, and type I achalasia correlate positively, whereas severe symptoms and integrated relaxation pressure correlate negatively with development of sigmoid esophagus. In contrast, Grade II dilation (3.5-6.0 cm) was the most common (52.9%), while grade III dilation (≥ 6 cm) was rare (5.0%). We found early onset, male, obesity, and type I achalasia correlated positively, while advanced age correlated negatively with esophageal dilation. Dilated and sigmoid esophagus were found mostly in types I and II achalasia, but typically not found in spastic disorders. The prevalence of ED was low (n = 63, 1.7%), and non-dilated esophagus and advanced age correlated with ED development. Patients with right-sided ED (n = 35) had a long disease duration (P = 0.005) with low integrated relaxation pressure values (P = 0.008) compared with patients with left-sided ED (n = 22). Patients with multiple EDs (n = 6) had lower symptom severity than patients with a single ED (P = 0.022). ConclusionsThe etiologies of dilated esophagus, sigmoid esophagus, and ED are considered multifactorial and different. Early diagnosis and optimal treatment of AEMDs are necessary to prevent these conditions.

Formal Verification of Web Navigation by Symbolic Model Checking

Hisashi MIYAZAKI,Tomoyuki YOKOGAWA,Kouichi SEKO,Yoichiro SATO,Michiyoshi HAYASE 대한전자공학회 2008 ITC-CSCC :International Technical Conference on Ci Vol.2008 No.7

Previously, it is general that users navigate from a web page to the other by clicking on a hyperlink. Recently web pages become dynamic with a variety of scripts and embedded client side programs. Such pages with dynamic navigation have a more complicated structure, so it is difficult to model and analyze. In this paper, we present a method to verify systems which have dynamic web navigation. For this purpose, we model the navigation using a UML statechart diagram and translate the model to a boolean expression. Thus it becomes possible to verify the systems formally using symbolic model checking. To demonstrate the proposed method, we apply the method to a system with dynamic web navigation and model-check the system using symbolic model checking tool called NuSMV [9]. As a result, we verified reachability to all pages of the system.

A STUDY OF HYDRAULIC PROPERTIES IN A SINGLE FRACTURE WITH IN-PLANE HETEROGENEITY: AN EVALUATION USING OPTICAL MEASUREMENTS OF A TRANSPARENT REPLICA

Sawada, Atsushi,Sato, Hisashi Korean Nuclear Society 2010 Nuclear Engineering and Technology Vol.42 No.1

Experimental examinations for evaluating fracutres were conducted by using transparent replicas of a single fracture in order to obtain the fracture data to contribute to the methodlogy on how to improve the definitaion of representative parameter values used for a parallel plate fracture model. Quantitative aperture distribution and quantitative tracer concentration data at each point in time were obtained by measuring the attenuation of transmitted light through the fracture in high spatial resolution. the representative aperture values evaluated from the multiple different measurement methods, such as arithmetic mean of aperture distribution measured by the optical method, transport aperture evaluated from the tracer test, and average aperture evaluated from the fracture void volume measurement converged to a unique value that indicates the accuracy of this experimental study. The aperture data was employed for verifying the numerical simulation under the assuption of Local Cubic Law and showed that the calculated flow rate through the fracture is 10%-100% larger than hydraulic test results. The quantitative tracer concentration data is also very valuable for validating existing numerical code for advection dispersion transport in-plane heterogeneous fractures.

A Study of Hydraulic Properties in a Single Fracture with In-plane Heterogeneity: An Evaluation Using Optical Measurements of a Transparent Replica

ATSUSHI SAWADA,HISASHI SATO 한국원자력학회 2010 Nuclear Engineering and Technology Vol.42 No.1

Experimental examinations for evaluating fractures were conducted by using transparent replicas of a single fracture in order to obtain the fracture data to contribute to the methodology on how to improve the definition of representative parameter values used for a parallel plate fracture model. Quantitative aperture distribution and quantitative tracer concentration data at each point in time were obtained by measuring the attenuation of transmitted light through the fracture in high spatial resolution. The representative aperture values evaluated from the multiple different measurement methods, such as arithmetic mean of aperture distribution measured by the optical method, transport aperture evaluated from the tracer test, and average aperture evaluated from the fracture void volume measurement converged to a unique value that indicates the accuracy of this experimental study. The aperture data was employed for verifying the numerical simulation under the assumption of Local Cubic Law and showed that the calculated flow rate through the fracture is 10% – 100% larger than hydraulic test results. The quantitative tracer concentration data is also very valuable for validating existing numerical code for advection dispersion transport in-plane heterogeneous fractures.

A Study on the Optimal Choice of Wavelet Packet Bases for Signal Compression

Akio Miyazaki,Hisashi Sato 대한전자공학회 1994 JTC-CSCC : Joint Technical Conference on Circuits Vol.- No.-

Biomechanical index for evaluation of stem size and position planning in THR surgery

Jiyean Kwon,Hisashi Naito,Itaru Otomaru,Masaki Takao,Yoshinobu Sato,Takeshi Matsumoto,Masao Tanaka 대한기계학회 2010 대한기계학회 춘추학술대회 Vol.2010 No.3

Cacao bean husk: an applicable bedding material in dairy free-stall barns

Akira Yajima,Hisashi Owada,Suguru Kobayashi,Natsumi Komatsu,Kazuaki Takehara,Maria Ito,Kazuhide Matsuda,Kan Sato,Hisao Itabashi,Satoshi Sugimura,Shuhei Kanda 아세아·태평양축산학회 2017 Animal Bioscience Vol.30 No.7

Objective: The objectives of the study were to assess the effect of cacao bean husk as bedding material in free-stall barn on the behavior, productivity, and udder health of dairy cattle, and on the ammonia concentrations in the barn. Methods: Four different stall surfaces (no bedding, cacao bean husk, sawdust, and chopped wheat straw) were each continuously tested for a period of 1 week to determine their effects on nine lactating Holstein cows housed in the free-stall barn with rubber matting. The lying time and the milk yield were measured between d 4 and d 7. Blood samples for plasma cortisol concentration and teat swabs for bacterial counts were obtained prior to morning milking on d 7. The time-averaged gas-phase ammonia concentrations in the barn were measured between d 2 and d 7. Results: The cows spent approximately 2 h more per day lying in the stalls when bedding was available than without bedding. The milk yield increased in the experimental periods when cows had access to bedding materials as compared to the period without bedding. The lying time was positively correlated with the milk yield. Bacterial counts on the teat ends recorded for cows housed on cacao bean husk were significantly lower than those recorded for cows housed without bedding. Ammonia concentration under cacao bean husk bedding decreased by 6%, 15%, and 21% as compared to no bedding, sawdust, and chopped wheat straw, respectively. The cortisol concentration was lowest in the period when cacao bean husk bedding was used. We observed a positive correlation between the ammonia concentrations in the barn and the plasma cortisol concentrations. Conclusion: Cacao bean husk is a potential alternative of conventional bedding material, such as sawdust or chopped wheat straw, with beneficial effects on udder health and ammonia concentrations in the barns.

Subtype of Achalasia and Integrated Relaxation Pressure Measured Using the Starlet High-resolution Manometry System: A Multicenter Study in Japan

Tetsuya Tatsuta,Hiroki Sato,Yusuke Fujiyoshi,Hirofumi Abe,Akio Shiwaku,Junya Shiota,Chiaki Sato,Masaki Ominami,Yoshitaka Hata,Hisashi Fukuda,Ryo Ogawa,Jun Nakamura,Yuichiro Ikebuchi,Hiroshi Yokomichi 대한소화기 기능성질환∙운동학회 2022 Journal of Neurogastroenterology and Motility (JNM Vol.28 No.4

Background/Aims ManoScan and Sandhill high-resolution manometry (HRM) systems are used worldwide; however, the diagnosis of achalasia on the Starlet HRM system is not fully characterized. Furthermore, the impact of calcium channel blockers and nitrites in treating achalasia has not been investigated using HRM. Management of recurrent cases is a priority issue, although few studies have examined patient characteristics. Methods We conducted a multicenter, large-scale database analysis. First, the diagnosis of treatment-naive achalasia in each HRM system was investigated. Next, patient characteristics were compared between type I-III achalasia, and the impact of patient characteristics, including calcium channel blocker and nitrite use for integrated relaxation pressure (IRP) values, were analyzed. Finally, patient characteristics with recurrent achalasia were elucidated. Results The frequency of type I achalasia with Starlet was significantly higher than that with ManoScan and Sandhill HRM systems. In achalasia, multivariate analysis identified male sex, advanced age, long disease duration, obesity, type I achalasia, and sigmoid type as risk factors related to normal IRP values (< 26 mmHg). Calcium channel blockers and nitrites use had no significant impact on the IRP values, although achalasia symptoms were indicated to be alleviated. In recurrent cases, the IRP value was significantly lower, and advanced age, long disease duration, and sigmoid type were more common than in treatment-naive patients. Conclusions We should cautiously interpret the type of achalasia and IRP values in the Starlet HRM system. Symptoms of recurrent cases are related to disease progression rather than IRP values, which should be considered in decision making.

Deposition of Aerosols on Leaves in a Cool-temperate Larch Forest in Northern Hokkaido, Japan

Fukazawa Tatsuya,Murao Naoto,Sato Hisashi,Takahashi Masahiro,Akiyama Masayuki,Yamaguchi Takashi,Noguchi Izumi,Takahashi Hiroyuki,Kozuka Chikara,Sakai Rei,Takagi Kentaro,Fujinuma Yasumi,Saigusa Nobuko 한국대기환경학회 2012 Asian Journal of Atmospheric Environment (AJAE) Vol.6 No.4

Aerosol concentrations at the CC-Lag site in the Teshio Experimental Forest increased from winter to spring and sometimes showed extremely high values associated with Kosa and/or forest-fire events. The range and mean of the mass concentrations of aerosol chemical species were as follows: total particulate mass, 1.2-29, 5.0; elemental carbon, 0.061-2.2, 0.43; organic carbon, 0.059-3.5, 0.79; and sulfate,0.12-6.2, 1.8 μg/m3. The total masses of the deposited particles on hybrid larch and on bamboo leaves were approximately 35 and 30 μg/cm2, respectively. The amounts of soil particles on the leaves were 6 μg/cm2 for the upper part of hybrid larch, 2μg/cm2 for the lower part of hybrid larch, and 1 μg/cm2 for Sasa bamboo leaves. The amounts of deposited black carbon were 2.3 μg/cm2 for the upper part of hybrid larch, 0.6 μg/cm2 for the lower part of hybrid larch, and 0.2 μg/cm2 for Sasa bamboo leaves. Half of the total deposited particular mass was attached on the hybrid larch; however, most of the total deposited mass was adhered on the Sasa bamboo leaves. Regardless of the species, there tend to be more deposited particles on the leaves in the upper part than in the lower part, with only a few meters height difference. Comparing the composition of the deposited particles to that of the atmospheric aerosols without any size cut, the fractions of water-soluble material sulfate and sea salt in the deposited aerosols were about one tenth and one hundredth lower than that in the aerosols, respectively. On the basis of the measured concentration and the deposited amount on leaves, the deposition velocity of black carbon was estimated to be approximately 0.5 cm/s. Aerosol concentrations at the CC-Lag site in the Teshio Experimental Forest increased from winter to spring and sometimes showed extremely high values associated with Kosa and/or forest-fire events. The range and mean of the mass concentrations of aerosol chemical species were as follows: total particulate mass, 1.2-29, 5.0; elemental carbon, 0.061-2.2, 0.43; organic carbon, 0.059-3.5, 0.79; and sulfate,0.12-6.2, 1.8 μg/m3. The total masses of the deposited particles on hybrid larch and on bamboo leaves were approximately 35 and 30 μg/cm2, respectively. The amounts of soil particles on the leaves were 6 μg/cm2 for the upper part of hybrid larch, 2μg/cm2 for the lower part of hybrid larch, and 1 μg/cm2 for Sasa bamboo leaves. The amounts of deposited black carbon were 2.3 μg/cm2 for the upper part of hybrid larch, 0.6 μg/cm2 for the lower part of hybrid larch, and 0.2 μg/cm2 for Sasa bamboo leaves. Half of the total deposited particular mass was attached on the hybrid larch; however, most of the total deposited mass was adhered on the Sasa bamboo leaves. Regardless of the species, there tend to be more deposited particles on the leaves in the upper part than in the lower part, with only a few meters height difference. Comparing the composition of the deposited particles to that of the atmospheric aerosols without any size cut, the fractions of water-soluble material sulfate and sea salt in the deposited aerosols were about one tenth and one hundredth lower than that in the aerosols, respectively. On the basis of the measured concentration and the deposited amount on leaves, the deposition velocity of black carbon was estimated to be approximately 0.5 cm/s.

How to make good animation movement

Toshihiro KOMMA,Kunio KONDO,Hisashi SATO 한국디자인학회 2010 한국디자인학회 학술발표대회 논문집 Vol.2010 No.10

What about the good character on the animation? In our past research work, we created a three-dimensional character animation using motion capture data. And then, we tried to make the software to change the three-dimensional animation character into the two-dimensional animation character with a kind of animation movement. The two-dimensional character animation has the different style of movement in comparison with the three-dimensional character animation. In this work, we didn't learn to hope for the audience to be in the character moving that was made by the operation which followed a physical simulation. Then, we got an idea when it was necessary to define the good character moving on the animation what we developed the anime creating system helped by the computer. In this paper, a technique of movement analysis of the animation is described.