Atom Transfer Radical Polymerization of Hexadecyl Acrylate Using CuSCN as the Catalyst

Wen Jian Xu,Xiu Lin Zhu,Zhen Ping Cheng,Jian Ying Chen,Jian Mei Lu 한국고분자학회 2004 Macromolecular Research Vol.12 No.1

Stochastic Reliable Control of a Class of Networked Control Systems with Actuator Faults and Input Saturation

Jian-Ning Li,Ya-Jun Pan,Hong-Ye Su,Cheng-lin Wen 제어·로봇·시스템학회 2014 International Journal of Control, Automation, and Vol.12 No.3

The stochastic reliable control problem for networked control systems (NCSs) subject to actuator failure and input saturation is investigated in this paper. In order to get the relationship between the maximum allowable consecutive packet dropouts, the packet dropout probability, the actuator failure matrix and the input saturation, a packet dropout probability dependent condition is given via linear matrix inequality (LMI) technology. Then, a suitable reliable controller is designed to ensure the closed-loop system to be exponentially mean square stable against actuator failures and input saturation. Finally, numerical examples are provided to show the effectiveness of the proposed method.

Evaluation of the Stability of Aspirin in Solid State by the Programmed Humidifying and Non-isothermal Experiments

Lin-Li Li,Xian-Cheng Zhan,Jian-Lin Tao 대한약학회 2008 Archives of Pharmacal Research Vol.31 No.3

The influence of both moisture and heat on the stability of aspirin was investigated by a single pair of experiments, one with programmed humidity control and the other non-isothermal, rather than many standard isothermal studies, each at constant relative humidity. In experiments, we adopted the acid-base back titration method to measure the content of aspirin in the presence of its degradation products. It was found that the degradation of aspirin could be expressed as ln[(c0-c)/c]=kt+D, where D was a lag time item not related to humidity and temperature. The relationship between the degradation rate constant k and humidity Hr and temperature T could be described as Arrhenius equation multiplied by an exponential item of relative humidity: k = A · exp(mHr) · exp(-(Ea/RT)), where A, Ea and m were the pre-exponential factor, observed activation energy, and a parameter related to humidity, respectively. The results obtained from the programmed humidifying and non-isothermal experiments, A=(1.09±2.04)×1012 h-1, Ea=(93.5±2.2) kJ ·mol-1 and m=1.18±0.19, were comparable to those from isothermal studies at constant humidity, A=(1.71±0.35)×1012 h-1, Ea=(94.9±0.7) kJ ·mol-1 and m=1.20±0.02. Since the programmed humidifying and non-isothermal experiments save time, labor and materials, it is suggested that the new experimental method can be used to investigate the stability of drugs unstable to both moisture and heat, instead of many classical isothermal experiments at constant humidity.

The motion rule of sand particles under control of the sand transportation engineering

Lin-gui Xin,Jian-jun Cheng,Bo-yu Chen,Rui Wang 한국풍공학회 2018 Wind and Structures, An International Journal (WAS Vol.27 No.4

In the desert and Gobi regions with strong wind and large sediment discharge, sand transporting engineering is more effective than sand blocking and sand fixing measures in sand prevention. This study uses the discrete phase model of 3D numerical simulation to study the motion trail, motion state and distribution rule of sand particles with different grain diameters when the included angle between the main shaft of the feather-row lateral transportation sand barrier and the wind direction changes, and conducts a comparison in combination with the wind tunnel test and the flow field rule of common sand barrier. According to the comparison, when wind-sand incoming flow passes through a feather-row sand barrier, sand particles slow down and deposit within the deceleration area under the resistance of the feather-row sand barrier, move along the transportation area formed by the transportation force, and accumulate as a ridge at the tail of the engineering. With increasing wind speed, the eolian erosion of the sand particles to the ground and the feather-row sand barrier is enhanced, and the sand transporting quantity and throw-over quantity of the feather-row sand barrier are both increased. When sand particles with different grain diameters bypass the feather-row sand barrier, the particle size of the infiltrating sands will increase with the included angle between the main shaft of the feather-row sand barrier and the wind direction. The obtained result demonstrates that, at a constant wind speed, the flow field formed is most suitable for the lateral transportation of the wind-drift flow when the included angle between the main shaft of the feather-row sand barrier lateral transportation engineering and the wind speed is less than or equal to 30°.

Development of Integrated Multi-Station System to Precisely Detect and Mitigate Surface Damage on Fused Silica Optics

Lin-Jie Zhao,Jian Cheng,Ming-Jun Chen,Xiao-Dong Yuan,Wei Liao,Hao Yang,Qi Liu,Hai-Jun Wang 한국정밀공학회 2021 International Journal of Precision Engineering and Vol.22 No.1

In high power laser facility, irreversible damage on fused silica optics, induced by laser irradiation or processing, seriously affects the service life of optics. Therefore, the work of inhibiting damage growth has been carried out in various countries. In our work, an integrated multi-station system is designed to detect and mitigate surface damage on fused silica. The process of processing fused silica optics include UV laser conditioning, surface damage detection and surface damage mitigation with CO2 laser. UV laser conditioning pre-initiates surface damage on fused silica optics with the laser flux less than Laser-Induced Damage Threshold (LIDT). Images of surface damage acquired from camera are processed by improved global threshold segmentation algorithm to extract damage information. Finally, CO2 laser is applied to process the damage with specific morphology to enhance the laser damage resistance. This integrated multi-station system saves the repeated optics installation time between the workstations with the positioning accuracy of 20 μm. Furthermore, the damage with diameter of 10 μm is mitigated to prolong service life of processed fused silica optics. The efficient and accurate integrated multi-station system is of great significance for off -line detecting and mitigating surface damage of fused silica optics in high power laser facility.

Preparation of silver Nano-Crystal patterns in oxide glasses under electric field accompanied by heat treatment

Jian Lin,Wen-Hai Huang,Shu-Hua Lei,Chang-Cheng Liu,Qi Bian,Li-Na Ma,Dong-Wei Li 한양대학교 세라믹연구소 2008 Journal of Ceramic Processing Research Vol.9 No.4

Nano-crystals embedded in glass always have interesting quantum effects, while nano-crystal patterns may have wide potential applications in preparing PIC, OEIC and other types of electronic and optoelectronic devices. A direct current electric field, accompanied by heat treatment, was applied on tellurite or silicate glass sheets. The silver ions in a diffused film were introduced into the glass matrix under a high-voltage electric field, instead of supplied during glass melting. The direct diffusion of metal ions, the nucleation and crystallization of nano-crystals in the glass were well controlled by the electric field accompanied by heat treatment. It was found that silver nano-crystal patterns can be transfer printed into tellurite and silicate glass sheets with both patterned diffusion and patterned crystallization. Nano-crystals embedded in glass always have interesting quantum effects, while nano-crystal patterns may have wide potential applications in preparing PIC, OEIC and other types of electronic and optoelectronic devices. A direct current electric field, accompanied by heat treatment, was applied on tellurite or silicate glass sheets. The silver ions in a diffused film were introduced into the glass matrix under a high-voltage electric field, instead of supplied during glass melting. The direct diffusion of metal ions, the nucleation and crystallization of nano-crystals in the glass were well controlled by the electric field accompanied by heat treatment. It was found that silver nano-crystal patterns can be transfer printed into tellurite and silicate glass sheets with both patterned diffusion and patterned crystallization.

Study on Adsorption Desulfurization of Biogas Using Iron Oxide Particles

( Cheng-chang Lien ),( Min-wei Wang ),( Liang-yu Jian ),( Jeng-liang Lin ) 한국농업기계학회 2018 한국농업기계학회 학술발표논문집 Vol.23 No.1

The contained hydrogen sulfide in biogas leads to corrosion of metal equipment. In addition, the high concentration of hydrogen sulfide can also hurt the health of humans and animals. As to be a renewable energy with both environmental protection and safety, biogas must be removed and purified before being used. In this study, a solid-state desulfurization device was designed. The biogas flow through the bottom of the transparent desulfurization column which is made of acrylic glass, the iron oxide particles were placed in the desulfurization column as desulfurizer, change the biogas flow and the height of iron oxide particles in the desulfurization column to experiment on desulfurization, measure the concentration of hydrogen sulfide adsorbed by the iron oxide particles at the above of the desulfurization column, then discuss the change of the hydrogen sulfide removed rate in biogas with the experimental period. The experimental result shows that the removed rate of hydrogen sulfide decreases with the increase of biogas flow, and it also increases with the iron oxide particle height in the desulfurization column, the longer stagnation inside the desulphurization column, will cause the better removed efficiency of hydrogen sulfide. In addition, the removed efficiency of hydrogen sulfide gradually decreases with the increase of the desulfurization period. The average desulfurization efficiency was 95.16% at biogas flow of 25 ℓ / min, iron oxide particle height of 15.3 cm and desulfurization period is 70 minutes.

Prolyl endopeptidase remodels macrophage function as a novel transcriptional coregulator and inhibits fibrosis

Lin Shuang-Zhe,Wu Wei-Jie,Cheng Yu-Qing,Zhang Jian-Bin,Jiang Dai-Xi,Ren Tian-Yi,Ding Wen-Jin,Liu Mingxi,Chen Yuan-Wen,Fan Jian-Gao 생화학분자생물학회 2023 Experimental and molecular medicine Vol.55 No.-

Macrophages are immune cells crucial for host defense and homeostasis maintenance, and their dysregulation is involved in multiple pathological conditions, such as liver fibrosis. The transcriptional regulation in macrophage is indispensable for fine-tuning of macrophage functions, but the details have not been fully elucidated. Prolyl endopeptidase (PREP) is a dipeptidyl peptidase with both proteolytic and non-proteolytic functions. In this study, we found that Prep knockout significantly contributed to transcriptomic alterations in quiescent and M1/M2-polarized bone marrow-derived macrophages (BMDMs), as well as aggravated fibrosis in an experimental nonalcoholic steatohepatitis (NASH) model. Mechanistically, PREP predominantly localized to the macrophage nuclei and functioned as a transcriptional coregulator. Using CUT&Tag and co-immunoprecipitation, we found that PREP was mainly distributed in active cis-regulatory genomic regions and physically interacted with the transcription factor PU.1. Among PREP-regulated downstream genes, genes encoding profibrotic cathepsin B and D were overexpressed in BMDMs and fibrotic liver tissue. Our results indicate that PREP in macrophages functions as a transcriptional coregulator that finely tunes macrophage functions, and plays a protective role against liver fibrosis pathogenesis.

Dong Hai Bridge Sea-Crossing Project in Shanghai, China : General Concept, Design, Construction and Durability 설계, 시공, 내구성 및 일반사항

Lin, Yuan-Pei,Zhang, Zeng-huan,Tang, Wei,Lu, Yong-Cheng,Ding, Jian-Kang,Zhang, Jian-Ying Korean Group of IABSE;Korea wind Engineering Resea 2006 Proceedings of the International Symposium on Sea- Vol.2006 No.-

Dong Hai Bridge in Shanghai is the longest in world and the first sea-crossing project in china, the total length of which is 32.5km and the width of the bridge is 31.5m. In this paper the general concepts of design, construction and durability are introduced. 상하이의 동해대교는 전장 32.5km 폭 31.5m 의 세계 최장 교량이며, 중국에서는 최초의 해상 횡단 프로젝트이다. 이논문에서는 동해대교의 설계, 건설, 그리고 내구성에 대한 기본 개념을 소개한다.

Relationships between Antioxidants and Quality Characteristics from Velvet Antlers of Formosan Sambar Deer

Shih-Lin Cheng,You-Ling Jian,Chih-Ming Chen,Bing-Tsan Liu 한국축산식품학회 2017 한국축산식품학회지 Vol.37 No.4

The quality characteristics of velvet antlers obtained from Formosan sambar deer (Cervus unicolor Swinhoi) (SDVA), harvested from 63 to 81 d during the velvet antler growth period, were evaluated by investigating the relationships between antioxidant levels; including content, activity, and content/activity ratios, and physical properties; including shear force values, color, and Ca content. The hardness of samples from base velvet antler sections increased, and that the color of these samples tended to become reddish-yellow (redder and more yellow), suggesting that the Ca content in the base section of the sample was not ossified yet. Samples from the upper sections of velvet antler showed higher superoxide dismutase (SOD), catalase (CAT), and glutathione peroxidase (GPX) content (3.91 to 1.50 mg/mL, 2.53 to 0.90 mg/mL, and 3.95 to 1.58 mg/mL, respectively) than did samples from the middle and base sections (p<0.05). The activity and content/activity ratios of GPX measured in the upper section were also found to be significantly greater than in the middle and base sections (p<0.05). We further observed that the content and activity of GPX was significantly and negatively correlated with Ca content, shear force values, and the content/activity ratio of this antioxidant (p<0.01). The study findings may serve as a reference index for quality evaluations of velvet antlers of Formosan sambar deer in future.