http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
고창현(Chang-hyun Ko),조일형(Il-Hyoung Cho) 한국해안해양공학회 2018 한국해안해양공학회 논문집 Vol.30 No.1
본 연구에서는 투과성 판을 통과하면서 발생하는 에너지 손실효과를 나타내는 비선형 항력 항을 등가 선형화기법으로 선형화시킨 준선형 모델을 제안하였다. 이 모델을 경계요소법(Boundary Element Method)으로 풀어 2차원 조파수조의 투과성 소파장치를 개발에 활용하였다. 투과성 판에서의 항력계수는 수리 모형실험 결과와 비교를 통해 새롭게 구하였다. 공극률 0.1, 잠긴 깊이 d/h = 0.1, 경사각도 10°≤ θ ≤ 20°를 갖는 투과성 소파장치가 전반적으로 우수한 소파성능을 보였다. 개발된 준선형 수치모델은 앞으로 다양한 형태의 투과성 소파장치의 최적 설계에 활용될 것이다. In present study, we suggested the quasi-linear model that linearizes the quadratic drag representing the energy loss across the porous plate. The quasi-linear model was solved by Boundary Element Method (BEM) for development of the porous wave absorber suitable for 2-D wave tank. The drag coefficient at the porous plate was newly obtained through comparison of experimental results. It is found that the porous wave absorber with porosity 0.1, submergence depth d/h = 0.1, and inclined angle 10° ≤ θ ≤ 20° shows the effective wave absorption. Using the developed quasi-linear numerical model, the optimal design of various types of a porous wave absorber will be applied.
SiC 매트릭스를 이용한 실리콘 양자점 초격자 박막 제조
김현종(Kim, Hyun-Jong),문지현(Moon, Ji-Hyun),조준식(Cho, Jun-Sik),장보윤(Chang, Bo-Yun),고창현(Ko, Chang-Hyun),박상현(Park, Sang-Hyun),윤경훈(Yoon, Kyung-Hoon),송진수(Song, Jin-Soo),오병성(O, Byung-Sung),이정철(Lee, Jeong-Chul) 한국신재생에너지학회 2009 한국신재생에너지학회 학술대회논문집 Vol.2009 No.06
다중접합 초 고효율 태양전지 제조를 위해 SiC 매트릭스를 이용한 실리콘 양자점 초격자 박막을 제조하고 특성을 분석하였다. SiC/Si_{1-x}C_x(x ~ 0.31)로 실리콘 양자점 초격자 박막을 Si과 C target을 이용한 co-sputtering법으로 초격자 박막을 제조하고, 1000?C에서 20분간 열처리를 하였다. high resolution transmission electron microscopy 사진으로 약1~7nm 크기인 양자점 생성과 분포 밀도를 확인할 수 있었으며, grazing incident X-ray diffraction (GIXRD)를 통해서 Si(111)과 beta-SiC(111)이 생성되었음을 알 수 있었다. Auger electron spectroscopy (AES)측정에서 stoichiometric SiC층과 Si-rich SiC층의 Si 원자농도 (56%, 69%)와 C 원자 농도 (44%, 31%)를 알 수 있었으며, Fourier transform infra-red spectroscopy (FTIR)측정에서 SiC 픽의 위치가 767에서 800cm^{-1}으로 이동하는 것을 알 수 있었다.
RF Co-sputtering법에 의한 Si<sub>1-x</sub>C<sub>x</sub> 박막 증착 및 후 열처리에 따른 양자점 박막 특성 분석
문지현(Moon, Ji-Hyun),김현종(Kim, Hyun-Jong),조준식(Cho, Jun-Sik),장보윤(Chang, Bo-Yun),고창현(Ko, Chang-Hyun),박상현(Park, Sang-Hyun),윤경훈(Yun, Kyoung-Hoon),송진수(Song, Jin-Soo),오병성(O, Byung-Sung),이정철(Lee, Jeong-Chul) 한국신재생에너지학회 2009 한국신재생에너지학회 학술대회논문집 Vol.2009 No.06
고효율 양자점 태양전지를 위하여 Si<sub>1-x</sub>C<sub>x</sub> 박막 내에 Si 양자점을 형성한 박막을 제작하고 그 특성을 분석하였다. Si<sub>1-x</sub>C<sub>x</sub> 박막은 Si과 C target을 co-sputtering하여 증착하였다. C target의 RF power를 변화시켜 Si<sub>1-x</sub>C<sub>x</sub> 박막의 조성비를 조절하였으며, 조성비는 auger electron spectroscopy로 정량적으로 측정하였다. 이 박막들을 질소 분위기에서 후 열처리하여 high resolution transmittance electron microscopy로 확인한 결과 박막 내에 2~10nm 크기의 양자점이 형성된 것을 관측할 수 있었다. 이 양자점은 transmittance electron diffraction과 grazing incident X-ray diffraction을 통해 Si 양자점과 SiC 양자점이 형성되었음을 알 수 있었다. Raman 측정 결과에서는 후 열처리한 Si<sub>1-x</sub>C<sub>x</sub> 박막의 조성비가 증가할 수록 crystal Si peak의 shift가 증가함을 알 수 있었고, 이를 통해 양자점의 크기도 함께 계산할 수 있었다. Fourier transform infrared spectroscopy을 통해 후 열처리한 Si1-xCx 박막의 양자점의 형성 원인을 추정하였다.
성장온도의 변화에 따른 MFI Zeolite Membrane의 성장 특성 분석
김덕은,고창현,오원태,Kim, Duk-Eun,Ko, Chang-Hyun,Oh, Weon-Tae 한국전기전자재료학회 2009 전기전자재료학회논문지 Vol.22 No.4
Si wafer, which was treated with TMSP-TBA (N-trimethoxysilylpropyl-n,n,n-tri-n-butylammonium bromide), was used foF a substrate to grow a MFI membrane. Growth of membranes was conducted in various conditions such as temperature and gravity, and their structures were in detail studied with field emission scanning electron microscope and x-ray diffractometer. The structures of membranes grown on substrates were strongly dependent on growing temperature and gravity.
구아검 첨가가 3D 프린팅을 위한 수리미 혼합물의 특성에 미치는 영향
나현식 ( Hyun-sik Na ),김동현 ( Dong-hyeon Kim ),이하영 ( Ha-young Lee ),이상민 ( Sang-min Lee ),유현지 ( Hyeon-ji Yu ),서고운 ( Go-wun Seo ),고창현 ( Chang Hyeon Ko ),박선우 ( Seon-woo Park ),최형욱 ( Hyung-wook Choi ),최예진 ( Y 한국수산과학회 2023 한국수산과학회지 Vol.56 No.6
Guar gum is an edible starch extracted from Cyamopsis tetragonolobus and used as an auxiliary ingredient to enhance the viscosity and adhesiveness of food and improve its emulsification stability. Here, characteristics of fish surimi mixture with various added amounts (0, 0.23, 0.45, 0.67, and 0.89 wt%) of guar gum were analyzed. In unheated su-rimi with guar gum, the pH decreased as the content increased. In the color values analysis, only the b* (yellowness) increased depending on the amount of added guar gum. The firmness increased with increasing guar gum content, and no significant difference in adhesiveness was observed. In heated surimi, a* (redness) and b* decreased in a content-dependent manner, and L* (lightness) was higher than that of unheated surimi. Regarding physical properties, the highest values of hardness, gumminess, and chewiness were observed in the heated surimi with 0.67 wt% of guar gum. However, no significant change was observed in springiness and cohesiveness. Results of sensory evaluation indicated that with higher guar gum content, only the hardness increased slightly, and significant differences were ab-sent in the remaining parameters. Thus, surimi with 0.67 wt% of guar gum is considered to be optimal for 3D printing.