http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
사료용 생균제 산업 발전 방향 - 사료용 생균제 산업 발전 방향
이찬호,Lee, Chan-Ho 한국단미사료협회 2004 사료산업 Vol.2 No.6
Probiotics란 그리스어로 "for life"를 의미하며, 우리말로는 "생균제"에 해당하는 단어라고 할 수 있다. 생균제라는 용어(Lilley와 Stiiwell, 1965)는 다른 생물의 성장을 억제하는 미생물이라 하여 정확히 항생제의 반대되는 개념으로 사용된 이후, 1989년 Fuller는 probiotics란 장내 미생물 균형을 개선함으로써 숙주동물을 위해 이롭게 작용하는 살아있는(viable) 미생물 사료 첨가제라 하여 살아있음의 의미를 강조하였다. (중략)
TiFe 공정합금의 미소합금 첨가에 따른 미세구조 변화 및 기계적 물성
이찬호,조재혁,문상철,김정태,여은진,김기범,Lee, Chan Ho,Jo, Jae Hyuk,Mun, Sang Chul,Kim, Jung Tae,Yeo, Eun Jin,Kim, Ki Buem 한국재료학회 2012 한국재료학회지 Vol.22 No.11
Recently, ultrafine grained (ufg, typically 100 > d > 500 nm) Ti-Fe eutectic materials have been highlighted due to their extraordinarily high strength and good abrasion resistance compared to conventional coarse grained (cg, d > $1{\mu}m$) materials. However, these materials exhibit limited plastic strain and toughness during room temperature deformation due to highly localized shear strain. Several approaches have been extensively studied to overcome such drawbacks, such as the addition of minor elements (Sn, Nb, Co, etc.). In this paper, we have investigated the influence of the addition of Gd and Y contents (0.3-1.0 at.%) into the binary Ti-Fe eutectic alloy. Gd and Y are chosen due to their immiscibility with Ti. Microstructural investigation reveals that the Gd phase forms in the eutectic matrix and the Gd phase size increases with increasing Gd content. The improvement of the mechanical properties is possibly correlated to the precipitation hardening. On the other hand, in the case of Ti-Fe-Y alloys, with increasing Y contents, primary phases form and lamellar spacing increases compared to the case of the eutectic alloy. Investigation of the mechanical properties reveals that the plasticity of the Ti-Fe-Y alloys is gradually improved, without a reduction of strength. These results suggest that the enhancement of the mechanical properties is closely related to the formation of the primary phase.
이중 채널 파이프라인 구조의 H.264용 고성능 보간 연산기 설계
이찬호,Lee, Chan-Ho 한국전기전자학회 2009 전기전자학회논문지 Vol.13 No.4
비디오 압축 코덱으로 널리 이용되는 H.264 표준의 움직임 보상기는 디코더에서 가장 복잡하고 연산시간이 많이 소모되는 유닛이다. 이러한 움직임 보상기의 성능을 결정하는 연산기가 보간 연산기(interpolator)이다. 1/4 보간 연산을 위해 휘도 픽셀은 6 탭 FIR 필터 연산이, 색차 픽셀은 2 탭 FIR 필터 연산이 필요하다. 본 논문에서는 이러한 복잡한 연산을 효과적으로 수행하는 고성능 보간 연산기 구조를 제안한다. 제안하는 구조는 이중 채널과 파이프라인 방식의 연산기로 구성되고 정수, 1/2, 1/4 보간 연산을 모두 수행할 수 있다. 연산기는 복잡도를 줄이기 위해 덧셈기와 쉬프터만으로 구성되면서도 반올림 오차가 전파되지 않도록 하여 연산결과의 정확도를 유지할 수 있다. 또한 보간 연산기의 구조는 연산기의 수를 조절하여 성능과 면적을 조절할 수 있다. 제안된 구조에 따라 휘도 및 색차 데이터를 위한 보간 연산기를 각각 Verilog-HDL을 이용하여 설계하여 동작과 성능을 검증하였다. The motion compensation is the most time-consuming and complex unit in the H.264 decoder. The performance of the motion compensation is determined by the calculation of pixel interpolation. The quarter-pixel interpolation is achieved using 6-tap horizontal or vertical FIR filters for luminance data and bilinear FIR filters for chroma data. We propose the architecture for interpolation of luminance and chroma data in H.264 decoders. It is composed of dual-channel pipelined processing elements and can interpolate integer-, half- and quarter-pixel data. The number of the processing cycles is different depending on the position. The processing elements are composed of adders and shifters to reduce the complexity while the accuracy of the pixel data are maintained. We design interpolators for luminance and chroma data using Verilog-HDL and verify the function and performance by implementing using an FPGA.