http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Dynamic investigation of porous functionally graded beam using a sinusoidal shear deformation theory
Fouad Bourada,Abdelmoumen Anis Bousahla,Mohamed Bourada,Abdelghani Azzaz,Amina Zinata,Abdelouahed Tounsi 한국풍공학회 2019 Wind and Structures, An International Journal (WAS Vol.28 No.1
This article present the free vibration analysis of simply supported perfect and imperfect (porous) FG beams using a high order trigonometric deformation theory. It is assumed that the material properties of the porous beam vary across the thickness. Unlike other theories, the number of unknown is only three. This theory has a parabolic shear deformation distribution across the thickness. So it is useless to use the shear correction factors. The Hamilton’s principle will be used herein to determine the equations of motion. Since, the beams are simply supported the Navier’s procedure will be retained. To show the precision of this model, several comparisons have been made between the present results and those of existing theories in the literature.
Buckling behavior of rectangular plates under uniaxial and biaxial compression
Mohamed Bourada,Abed Bouadi,Abdelmoumen Anis Bousahla,Amel Senouci,Fouad Bourada,Abdelouahed Tounsi,S. R. Mahmoud 국제구조공학회 2019 Structural Engineering and Mechanics, An Int'l Jou Vol.70 No.1
In the classical stability investigation of rectangular plates the classical thin plate theory (CPT) is often employed, so omitting the transverse shear deformation effect. It seems quite clear that this procedure is not totally appropriate for the investigation of moderately thick plates, so that in the following the first shear deformation theory proposed by Meksi et al. (2015), that permits to consider the transverse shear deformation influences, is used for the stability investigation of simply supported isotropic rectangular plates subjected to uni-axial and bi-axial compression loading. The obtained results are compared with those of CPT and, for rectangular plates under uniaxial compression, a novel direct formula, similar to the conventional Bryan’s expression, is found for the Euler stability stress. The accuracy of the present model is also ascertained by comparing it, with model proposed by Piscopo (2010).
A novel refined plate theory for stability analysis of hybrid and symmetric S-FGM plates
Fouad Bourada,Khaled Amara,Abdelmoumen A. Bousahla,Abdelouahed Tounsi,S. R. Mahmoud 국제구조공학회 2018 Structural Engineering and Mechanics, An Int'l Jou Vol.68 No.6
In this paper, buckling analysis of hybrid functionally graded plates using a novel four variable refined plate theory is presented. In this theory the distribution of transverse shear deformation is parabolic across the thickness of the plate by satisfying the surface conditions. Therefore, it is unnecessary to use a shear correction factor. The variations of properties of the plate through the thickness are according to a symmetric sigmoid law (symmetric S-FGM). The principle virtual works is used herein to extract equilibrium equations. The analytical solution is determined using the Navier method for a simply supported rectangular plate subjected to axial forces. The precision of this theory is verified by comparing it with the various solutions available in the literature.
Fouad Bourada,Khaled Amara,Abdelouahed Tounsi 국제구조공학회 2016 Steel and Composite Structures, An International J Vol.21 No.6
The current research presents a buckling analysis of isotropic and orthotropic plates by proposing a new four variable refined plate theory. Contrary to the existing higher order shear deformation theories (HSDT) and the first shear deformation theory (FSDT), the proposed model uses a new displacement field which incorporates undetermined integral terms and involves only four variables. The governing equations for buckling analysis are deduced by utilizing the principle of virtual works. The analytical solution of a simply supported rectangular plate under the axial loading has been determined via the Navier method. Numerical investigations are performed by using the proposed model and the obtained results are compared with CPT solutions, FSDT solutions, and the existing exact solutions in the literature. It can be concluded that the developed four variable refined plate theory, which does not use shear correction coefficient, is not only simple but also comparable to the FSDT.
Stability and dynamic analyses of SW-CNT reinforced concrete beam resting on elastic-foundation
Fouad Bourada,Abdelmoumen Anis Bousahla,Abdeldjebbar Tounsi,E.A. Adda Bedia,S.R. Mahmoud,Kouider Halim Benrahou,Abdelouahed Tounsi 사단법인 한국계산역학회 2020 Computers and Concrete, An International Journal Vol.25 No.6
This paper, presents the dynamic and stability analysis of the simply supported single walled Carbon Nanotubes (SWCNT) reinforced concrete beam on elastic-foundation using an integral first-order shear deformation beam theory. The condition of the zero shear-stress on the free surfaces of the beam is ensured by the introduction of the shear correction factors. The SWCNT reinforcement is considered to be uniform and variable according to the X, O and V forms through the thickness of the concrete beam. The effective properties of the reinforced concrete beam are calculated by employing the rule of mixture. The analytical solutions of the buckling and free vibrational behaviors are derived via Hamilton’s principle and Navier method. The analytical results of the critical buckling loads and frequency parameters of the SWCNT-RC beam are presented in the form of explicit tables and graphs. Also the diverse parameters influencing the dynamic and stability behaviors of the reinforced concrete beam are discussed in detail.
A new simple shear and normal deformations theory for functionally graded beams
Mohamed Bourada,Abdelouahed Tounsi,Abdelhakim Kaci,Mohammed Sid Ahmed Houari 국제구조공학회 2015 Steel and Composite Structures, An International J Vol.18 No.2
In the present work, a simple and refined trigonometric higher-order beam theory is developed for bending and vibration of functionally graded beams. The beauty of this theory is that, in addition to modeling the displacement field with only 3 unknowns as in Timoshenko beam theory, the thickness stretching effect (εz= 0) is also included in the present theory. Thus, the present refined beam theory has fewer number of unknowns and equations of motion than the other shear and normal deformations theories, and it considers also the transverse shear deformation effects without requiring shear correction factors. The neutral surface position for such beams in which the material properties vary in the thickness direction is determined. Based on the present refined trigonometric higher-order beam theory and the neutral surface concept, the equations of motion are derived from Hamilton's principle. Numerical results of the present theory are compared with other theories to show the effect of the inclusion of transverse normal strain on the deflections and stresses.
Bending behaviour of FGM plates via a simple quasi-3D and 2D shear deformation theories
Youcef, Ali,Bourada, Mohamed,Draiche, Kada,Boucham, Belhadj,Bourada, Fouad,Addou, Farouk Yahia Techno-Press 2020 Coupled systems mechanics Vol.9 No.3
This article investigates the static behaviour of functionally graded (FG) plates sometimes declared as advanced composite plates by using a simple and accurate quasi-3D and 2D hyperbolic higher-order shear deformation theories. The properties of functionally graded materials (FGMs) are assumed to vary continuously through the thickness direction according to exponential law distribution (E-FGM). The kinematics of the present theories is modeled with an undetermined integral component and satisfies the free transverse shear stress conditions on the top and bottom surfaces of the plate; therefore, it does not require the shear correction factor. The fundamental governing differential equations and boundary conditions of exponentially graded plates are derived by employing the static version of principle of virtual work. Analytical solutions for bending of EG plates subjected to sinusoidal distributed load are obtained for simply supported boundary conditions using Navier'is solution procedure developed in the double Fourier trigonometric series. The results for the displacements and stresses of geometrically different EG plates are presented and compared with 3D exact solution and with other quasi-3D and 2D higher-order shear deformation theories to verify the accuracy of the present theory.
Liani, Mohamed,Moulay, Noureddine,Bourada, Fouad,Addou, Farouk Yahia,Bourada, Mohamed,Tounsi, Abdelouahed,Hussain, Muzamal Techno-Press 2022 Advances in materials research Vol.11 No.1
In this paper, the nonlocal integral Timoshenko beam model is employed to study the free vibration characteristics of singled walled carbon nanotubes (SWCNTs) including the thermal effect. Based on the nonlocal continuum theory, the governing equations of motion are formulated by considering thermal effect. The influences of small scale parameter, the chirality of SWCNTs, the vibrational mode number, the aspect ratio of SWCNTs and temperature changes on the thermal vibration properties of single-walled nanotubes are examined and discussed. Results indicate significant dependence of natural frequencies on the nonlocal parameter, the temperature change, the aspect ratio and the chirality of SWCNTs. This work should be useful reference for the application and the design of nanoelectronics and nanoelectromechanical devices that make use of the thermal vibration properties of SWCNTs.
Nasrine Belbachir,Mohamed Bourada,Kada Draiche,Abdelouahed Tounsi,Fouad Bourada,Abdelmoumen Anis Bousahla,S. R. Mahmoud 국제구조공학회 2020 Smart Structures and Systems, An International Jou Vol.25 No.4
This article deals with the flexural analysis of anti-symmetric cross-ply laminated plates under nonlinear thermal loading using a refined plate theory with four variables. In this theory, the undetermined integral terms are used and the number of variables is reduced to four, instead of five or more in other higher-order theories. The boundary conditions on the top and the bottom surfaces of the plate are satisfied; hence the use of the transverse shear correction factors is avoided. The principle of virtual work is used to obtain governing equations and boundary conditions. Navier solution for simply supported plates is used to derive analytical solutions. For the validation of the present theory, numerical results for displacements and stresses are compared with those of classical, first-order, higher-order and trigonometric shear theories reported in the literature.
Bendaho, Boudjema,Belabed, Zakaria,Bourada, Mohamed,Benatta, Mohamed Atif,Bourada, Fouad,Tounsi, Abdelouahed Techno-Press 2019 Advances in nano research Vol.7 No.4
In this present paper, a new two dimensional (2D) and quasi three dimensional (quasi-3D) nonlocal shear deformation theories are formulated for free vibration analysis of size-dependent functionally graded (FG) nanoplates. The developed theories is based on new description of displacement field which includes undetermined integral terms, the issues in using this new proposition are to reduce the number of unknowns and governing equations and exploring the effects of both thickness stretching and size-dependency on free vibration analysis of functionally graded (FG) nanoplates. The nonlocal elasticity theory of Eringen is adopted to study the size effects of FG nanoplates. Governing equations are derived from Hamilton's principle. By using Navier's method, analytical solutions for free vibration analysis are obtained through the results of eigenvalue problem. Several numerical examples are presented and compared with those predicted by other theories, to demonstrate the accuracy and efficiency of developed theories and to investigate the size effects on predicting fundamental frequencies of size-dependent functionally graded (FG) nanoplates.