http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Abdeldjebbar Tounsi,Adda Hadj Mostefa,Amina Attia,Abdelmoumen Anis Bousahla,Fouad Bourada,Abdelouahed Tounsi,Mohammed A. Al-Osta 국제구조공학회 2023 Structural Engineering and Mechanics, An Int'l Jou Vol.86 No.1
The free vibration of temperature-dependent functionally graded plates (FGPs) resting on a viscoelastic foundation is investigated in this paper using a newly developed simple first-order shear deformation theory (FSDT). Unlike other first order shear deformation (FSDT) theories, the proposed model contains only four variables’ unknowns in which the transverse shear stress and strain follow a parabolic distribution along the plates’ thickness, and they vanish at the top and bottom surfaces of the plate by considering a new shape function. For this reason, the present theory requires no shear correction factor. Linear steadystate thermal loads and power-law material properties are supposed to be graded across the plate’s thickness. Uniform, linear, non-linear, and sinusoidal thermal rises are applied at the two surfaces for simply supported FGP. Hamilton’s principle and Navier’s approach are utilized to develop motion equations and analytical solutions. The developed theory shows progress in predicting the frequencies of temperature-dependent FGP. Numerical research is conducted to explain the effect of the power law index, temperature fields, and damping coefficient on the dynamic behavior of temperature-dependent FGPs. It can be concluded that the equation and transformation of the proposed model are as simple as the FSDT.
Abdelouahed Tounsi,S.U. Al-Dulaijan,Mohammed A. Al-Osta,Abdelbaki Chikh,M.M. Al-Zahrani,Alfarabi Sharif,Abdeldjebbar Tounsi 국제구조공학회 2020 Steel and Composite Structures, An International J Vol.34 No.4
In this research, a simple four-variable trigonometric integral shear deformation model is proposed for the static behavior of advanced functionally graded (AFG) ceramic-metal plates supported by a two-parameter elastic foundation and subjected to a nonlinear hygro-thermo-mechanical load. The elastic properties, including both the thermal expansion and moisture coefficients of the plate, are also supposed to be varied within thickness direction by following a power law distribution in terms of volume fractions of the components of the material. The interest of the current theory is seen in its kinematics that use only four independent unknowns, while first-order plate theory and other higher-order plate theories require at least five unknowns. The "in-plane displacement field" of the proposed theory utilizes cosine functions in terms of thickness coordinates to calculate out-of-plane shear deformations. The vertical displacement includes flexural and shear components. The elastic foundation is introduced in mathematical modeling as a two-parameter Winkler-Pasternak foundation. The virtual displacement principle is applied to obtain the basic equations and a Navier solution technique is used to determine an analytical solution. The numerical results predicted by the proposed formulation are compared with results already published in the literature to demonstrate the accuracy and efficiency of the proposed theory. The influences of "moisture concentration", temperature, stiffness of foundation, shear deformation, geometric ratios and volume fraction variation on the mechanical behavior of AFG plates are examined and discussed in detail.
Ahmed Bakoura,Fouad Bourada,Abdelmoumen Anis Bousahla,Abdeldjebbar Tounsi,Kouider Halim Benrahou,Abdelouahed Tounsi,Mesfer Mohammad Al-Zahrani,S.R. Mahmoud 사단법인 한국계산역학회 2021 Computers and Concrete, An International Journal Vol.27 No.1
In this article, the mechanical buckling analysis of simply-supported functionally graded plates is carried out using a higher shear deformation theory (HSDT) in conjunction with the stress function method. The proposed formulation is variationally consistent, does not use a shear correction factor and gives rise to a variation of transverse shear stress such that the transverse shear stresses vary parabolically through the thickness satisfying the surface conditions without stress of shear. The properties of the plate are supposed to vary across the thickness according to a simple power law variation in terms of volume fraction of the constituents of the material. Numerical results are obtained to study the influences of the power law index and the geometric ratio on the critical buckling load.
Mohammed A. Al-Osta,Hayat Saidi,Abdelouahed Tounsi,S.U. Al-Dulaijan,M.M. Al-Zahrani,Alfarabi Sharif,Abdeldjebbar Tounsi 국제구조공학회 2021 Smart Structures and Systems, An International Jou Vol.28 No.4
In this project, the hygro-thermo-mechanical bending behavior of perfect and imperfect advanced functionally graded (AFG) ceramic-metal plates is analytically investigated using an integral plate model for the first time. The plate is assumed to be supported by a two-parameter elastic foundation. Because of the technical problems encountered in the manufacture of AFG, porosities and micro-voids can occur in AFG specimens, which can result in reduced density and strength of materials. Thus, due to the presence of porosity, a modified rule of mixture is adopted to predict the material properties of the AFG plates. The governing equations are deduced by adopting the "principle of virtual work" and an integral plate model. The analytical Navier's method is considered to solve the obtained differential equations for simply supported AFG porous plate. The results obtained are checked by comparing them for non-porous and porous AFG plates with those available in the open literature. Finally, this work will help us to design advanced functionally graded materials to ensure better durability and efficiency for hygro-thermal environments.
Kada Draiche,Abdelmoumen Anis Bousahla,Abdelouahed Tounsi,Afaf S. Alwabli,Abdeldjebbar Tounsi,S.R. Mahmoud 사단법인 한국계산역학회 2019 Computers and Concrete, An International Journal Vol.24 No.4
This paper aims to present an analytical model to predict the static analysis of laminated reinforced composite plates subjected to sinusoidal and uniform loads by using a simple first-order shear deformation theory (SFSDT). The most important aspect of the present theory is that unlike the conventional FSDT, the proposed model contains only four unknown variables. This is due to the fact that the inplane displacement field is selected according to an undetermined integral component in order to reduce the number of unknowns. The governing differential equations are derived by employing the static version of principle of virtual work and solved by applying Navier’s solution procedure. The non-dimensional displacements and stresses of simply supported antisymmetric cross-ply and angle-ply laminated plates are presented and compared with the exact 3D solutions and those computed using other plate theories to demonstrate the accuracy and efficiency of the present theory. It is found from these comparisons that the numerical results provided by the present model are in close agreement with those obtained by using the conventional FSDT.
Stability and dynamic analyses of SW-CNT reinforced concrete beam resting on elastic-foundation
Fouad Bourada,Abdelmoumen Anis Bousahla,Abdeldjebbar Tounsi,E.A. Adda Bedia,S.R. Mahmoud,Kouider Halim Benrahou,Abdelouahed Tounsi 사단법인 한국계산역학회 2020 Computers and Concrete, An International Journal Vol.25 No.6
This paper, presents the dynamic and stability analysis of the simply supported single walled Carbon Nanotubes (SWCNT) reinforced concrete beam on elastic-foundation using an integral first-order shear deformation beam theory. The condition of the zero shear-stress on the free surfaces of the beam is ensured by the introduction of the shear correction factors. The SWCNT reinforcement is considered to be uniform and variable according to the X, O and V forms through the thickness of the concrete beam. The effective properties of the reinforced concrete beam are calculated by employing the rule of mixture. The analytical solutions of the buckling and free vibrational behaviors are derived via Hamilton’s principle and Navier method. The analytical results of the critical buckling loads and frequency parameters of the SWCNT-RC beam are presented in the form of explicit tables and graphs. Also the diverse parameters influencing the dynamic and stability behaviors of the reinforced concrete beam are discussed in detail.
Salah Refrafi,Abdelmoumen Anis Bousahla,Abdelhakim Bouhadra,Abderrahmane Menasria,Fouad Bourada,Abdeldjebbar Tounsi,E.A. Adda Bedia,S.R. Mahmoud,Kouider Halim Benrahou,Abdelouahed Tounsi 사단법인 한국계산역학회 2020 Computers and Concrete, An International Journal Vol.25 No.4
In this research work, the hygrothermal and mechanical buckling responses of simply supported FG sandwich plate seated on Winkler-Pasternak elastic foundation are investigated using a novel shear deformation theory. The current model take into consideration the shear deformation effects and ensures the zero shear stresses on the free surfaces of the FG-sandwich plate without requiring the correction factors “Ks”. The material properties of the faces sheets of the FG-sandwich plate are assumed varies as power law function “P-FGM” and the core is isotropic (purely ceramic). From the virtual work principle, the stability equations are deduced and resolved via Navier model. The hygrothermal effects are considered varies as a nonlinear, linear and uniform distribution across the thickness of the FG-sandwich plate. To check and confirm the accuracy of the current model, a several comparison has been made with other models found in the literature. The effects the temperature, moisture concentration, parameters of elastic foundation, side-to-thickness ratio, aspect ratio and the inhomogeneity parameter on the critical buckling of FG sandwich plates are also investigated.
Mohammed Cherif Rahmani,Abdelhakim Kaci,Abdelmoumen Anis Bousahla,Fouad Bourada,Abdeldjebbar Tounsi,E.A. Adda Bedia,S.R. Mahmoud,Kouider Halim Benrahou,Abdelouahed Tounsi 사단법인 한국계산역학회 2020 Computers and Concrete, An International Journal Vol.25 No.3
The influence of boundary conditions on the bending and free vibration behavior of functionally graded sandwich plates resting on a two-parameter elastic foundation is examined using an original novel high order shear theory. The Hamilton’s principle is used herein to derive the equations of motion. The number of unknowns and governing equations of the present theory is reduced, and hence makes it simple to use. This theory includes indeterminate integral variables and contains only four unknowns in which any shear correction factor not used, with even less than the conventional theory of first shear strain (FSDT). Unlike any other theory, the number of unknown functions involved in displacement field is only four, as against five, six or more in the case of other shear deformation theories. Galerkin’s approach is utilized for FGM sandwich plates with six different boundary conditions. The accuracy of the proposed solution is checked by comparing it with other closed form solutions available in the literature.
Rachid Zerrouki,Abdelkader Karas,Mohamed Zidour,Abdelmoumen Anis Bousahla,Abdelouahed Tounsi,Fouad Bourada,Abdeldjebbar Tounsi,Kouider Halim Benrahou,S.R. Mahmoud 국제구조공학회 2021 Structural Engineering and Mechanics, An Int'l Jou Vol.78 No.2
This work focused on the novel numerical tool for the bending responses of carbon nanotube reinforced composites (CNTRC) beams. The higher order shear deformation beam theory (HSDT) is used to determine strain-displacement relationships. A new exponential function was introduced into the carbon nanotube (CNT) volume fraction equation to show the effect of the CNT distribution on the CNTRC beams through displacements and stresses. To determine the mechanical properties of CNTRCs, the rule of the mixture was employed by assuming that the single-walled carbon nanotubes (SWCNTs)are aligned and distributed in the matrix. The governing equations were derived by Hamilton’s principle, and the mathematical models presented in this work are numerically provided to verify the accuracy of the present theory. The effects of aspect ratio (l/d), CNT volume fraction (Vcnt), and the order of exponent (n) on the displacement and stresses are presented and discussed in detail. Based on the analytical results. It turns out that the increase of the exponent degree (n) makes the X-beam stiffer and the exponential CNTs distribution plays an indispensable role to improve the mechanical properties of the CNTRC beams.
Natural frequencies of FGM nanoplates embedded in an elastic medium
Bouafia, Halima,Chikh, Abdelbaki,Bousahla, Abdelmoumen Anis,Bourada, Fouad,Heireche, Houari,Tounsi, Abdeldjebbar,Benrahou, Kouider Halim,Tounsi, Abdelouahed,Al-Zahrani, Mesfer Mohammad,Hussain, Muzama Techno-Press 2021 Advances in nano research Vol.11 No.3
The small scale impact on the vibrational properties of "functionally graded" (FG) nanoplate embedded in an elastic medium is examined. The formulation is based on the four-unknown refined integral plate theory on aggregate with the nonlocal elasticity theory. Contrary to other theories, this one involves only four unknown variables. The solution procedure is obtained by employing the motion differential equations of physical phase that are converted into set of "linear algebraic equations". After, these are solved by a computer code. The influences of aspect ratio, material index, nonlocal parameter and elastic medium stiffness on the different modal vibrations of FG nanoplate are explored. The results demonstrate the significant impact of different physical and geometrical parameters on the vibration behavior of FG nanoplate.