http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
유비쿼터스 센서네트워크 분석을 위한 모니터링 도구 설계 및 구현
한형욱 ( Hyeong-wook Han ),이정배 ( Jeong-bae Lee ),안성순 ( Sung-soon Ahn ) 한국정보처리학회 2009 한국정보처리학회 학술대회논문집 Vol.16 No.2
u-City 통합 운영 센터의 목적은 다양한 u-City 서비스들의 정보를 수집, 분석, 통합하여 제공함으로써 삶의 질을 높이고 도시를 효율적으로 관리하는 것이다. 이를 위해서 u-City 통합 플랫폼 구축과 기술 표준화를 위한 연구들이 활발히 진행되고 있으며, u-City 통합 플랫폼은 한 서비스에 종속적이지 않은 독립적인 서비스 플랫폼으로서 기존의 u-City서비스를 제공할 수 있으며 자유롭게 확장 될 수 있어야 한다. 따라서 효율적인 통합 플랫폼 구축을 위해서는 기존의 센서 네트워크 시스템 분석이 필요하며 본 논문에서는 이기종의 센서 네트워크 시스템들의 비교 및 분석을 용이하게 하는 지원도구를 설계 및 구현한다.
특수학급 중도중복장애학생 의료컨설팅 사례 : 인천광역시를 중심으로
한형욱(Hyeong-Wook Han),김라경(RahKyung Kim),김재형(Jae-Hyung Kim) 한국발달장애학회 2022 발달장애연구 Vol.26 No.1
본 연구의 목적은 인천광역시 지역에 일반학교의 특수학급(일반학급 및 중도중복장애학급)에 재학 중인 중도중복장애학생들을 대상으로 시행한 의료 컨설팅 프로그램의 과정과 결과를 조사하고 일반학교 내의 중도중복장애학생이 의료적 지원의 요구 상태에 대해 알아보고자 하였다. 이를 통해 중도중복장애학생에 대한 의료 컨설팅 프로그램의 효율적 운영을 위해 개선할 점에 대한 고찰을 해보고자 하였다. 2018년 3월부터 2019년 12월까지 일반학교의 특수학급에 재학 중인 30명의 중도중복장애학생을 대상으로 학교방문의료컨설팅과 병원 방문 진료하였으며, 학생의 기능적 상태와 의학적 상태에 대해 평가하였다. 학교 방문 결과 추가 검사가 필요하다고 판단되는 중도중복장애학생 20명을 대상으로 신체검사, 기초 혈액 검사, 영상 검사 등을 실시했다. 학교방문의료컨설팅 결과 특수학급에 재학 중인 중도중복장애학생 모두가 보행이 불가능한 상태였으며, 거의 모든 일상생활 동작에 타인의 도움이 필요한 상태였다. 병원방문컨설팅 결과 대부분 심한 기능장애와 함께 최소 1개 이상의 내외과적 질환을 앓고 있거나, 추가 검사와 관리가 필요하였다. 연구결과 일반학교 특수학급에 재학 중인 중도중복장애학생들은 다양한 의료적 지원과 건강관리지원이 요구되었다. 특수학급에 재학 중인 중도중복장애학생들의 양질의 교육을 보장하기 위하여 지역사회에 존재하는 여러 서비스의 협력체계를 구축하고, 통합된 서비스를 통한 효율적인 의료 컨설팅 시스템 구축과 학생들을 지역사회 내에서 지속적인 관리할 수 있는 지역사회중심재활서비스가 필요하다. The purpose of this study was to investigate the process and results of a medical consulting program conducted for students with severe multiple disabilities enrolled in special classes of general schools in Incheon Metropolitan City and to find out their medical conditions and needs of medical service. The successful and effective medical consultation for students with severe multiple disabilities was recommended. For this purpose, from March 2018 to December 2019, students with severe multiple disabilities enrolled in special classes at general schools were treated with school-visit and hospital visit medical consulting programs, and their functional and medical conditions of the students were evaluated. Physical examinations, basic blood tests, and imaging tests were conducted on 20 students with moderate to severe disabilities who needed additional tests as a result of their school visit. All students in special classes were unable to walk, and almost all daily activities required the help of others. As a result of hospital visit consulting, most of the students with severe multiple disability suffered from at least one internal or external disease along with severe functional impairment, or needed additional examination and medical treatment. In order to ensure the quality education of students with severe and multiple disabilities in special classes, interagency collaboration with various services that exist in the local community and provision of efficient medical consulting system through service integration were needed, Community-based rehabilitation services that continuously support students with disabilities in the community was discussed.
Lasertexturing을 이용한 Pattern의 폭과 깊이에 따른 마찰특성
정우영(WooYoung Chung),한형욱(HyungWook Han),송민규(MinGyu Song),민준원(JoonWon Min),정원용(WonYoung Jeung),이명호(MeungHo Rhee) 한국트라이볼로지학회 2010 한국트라이볼로지학회 학술대회 Vol.2010 No.11
Patterning samples based on various conditions were fabricated by Laser Surface Texturing. The surface pattern shape of samples was controlled using laser scanner machine combined with an pulsed fiber laser. For the tests, honeycomb patterned samples for the different depth and width of line condition was textured by laser surface texturing and then friction coefficient at various lubricant conditions measured into plate on plate friction tester. Experimental results depending on line width and depth of patterning, and lubrication condition of friction test, will be presented. This laser textured honeycomb pattern showed a good scuffing resistance behavior and comparatively high were resistance.
레이저 텍스처링을 이용한 점과선을 결합한 Pattern의 마찰특성
정우영(WooYoung Chung),김상호(SangHo Kim),한형욱(HyungWook Han),민준원(JoonWon Min),정원용(WonYong Jeung),이명호(MeungHo Rhee) 한국트라이볼로지학회 2010 한국트라이볼로지학회 학술대회 Vol.2010 No.6
Laser Surface Texturing(LST) is typical high speed micro forming process using the pulsed laser to form micro dimple shapes on friction area with high lubrication characteristics like e.g. piston ring. In view of new low friction methods, special surface processes like Laser Texturing gain importance for the associated field. For a better understanding of the working mechanisms and the process for the coupling of line patterning and dimple texturing models, advanced combination rules as well as detailed experimental investigations is required. New results of research concerning correlations among dimple and line depths, and lubricant conditions are presented.
안성순 ( Sungsoon Ahn ),이정배 ( Jeong-bae Lee ),한형욱 ( Hyeong-wook Han ),김대응 ( Dae-eung Kim ) 한국정보처리학회 2008 한국정보처리학회 학술대회논문집 Vol.15 No.2
유비쿼터스 컴퓨팅은 우리의 생활양식을 빠르게 변화시켜가고 있다. 그러한 배경에는 IT 기술 고도화와 무선 통신기술 발달로 인한 센서 네트워크 환경이 있다. 유비쿼터스 환경 속 센서 네트워크 구축에 있어서는 기존 네트워크와는 다르게 정해진 규격의 동일 장비의 네트워크가 아닌 정해진 규격의 다양한 장비들 간의 상호교류 속에서 이루어진 다는 것이 다르다. 또한 무선을 통해 정보를 주고 받기 때문에 주변 환경에 따라서 통신을 위한 추가적인 경비가 더 소모되기도 한다. 본 논문에서는 이러한 센서 네트워크 환경 구축함에 있어 효율적인 방안을 제시하고 RapidPLUS를 이용하여 시뮬레이터를 구현한다.
Laser Pattern 형상에 대한 마찰특성에 관한 연구
정우영(WooYoung Chung),김상호(SangHo Kim),한형욱(HyungWook Han),민준원(JoonWon Min),정원용(Won Yong Jeung),이명호(MeungHo Rhee) 한국트라이볼로지학회 2009 한국트라이볼로지학회 학술대회 Vol.2009 No.11
Although laser texturing technology is known for effective method to improve the tribological performance of friction surface for years, new applications are reported. Up to date, laser texturing approaches found in the literature are mainly discussed about the dimple shape cases or its friction effect problems. However, for industrial applications, the line pattern characteristic of laser texturing becomes another interest for the friction process. The impact of line pattern on lubricating surface conditions was investigated in this study. Tribological experiments were conducted with the STD61 steel patterned for a variety of depths, gaps, and shapes. Marking laser with a scanner were used for the laser texturing process.
서운경(Woonkyung Seo),이원(Won Lee),한형욱(Hyung-Uck Han_),고택수(Taeksu Go),박수현(Suhyun Park),김인수(Insoo Kim) 대한구강악안면외과학회 2006 대한구강악안면외과학회지 Vol.32 No.6
Necrotizing fasciitis has been recognized as a potentially lethal and rapidly progressing infection. Necrotizing fasciitis of head and neck area is rare but fatal disease that should be prompt diagnosis and recognition. If not promptly recognized and treated, infection can spread into the deep spaces of the neck and compromise the airway. It may also spread into the mediastimum producing life threatening sepsis. In this report, we describe the treatment of 4 cases of necrotizing fasciitis of head and neck area and discuss diagnosis, treatment, complication and consideration with review of literatures.
Laser Surface Texturing을 이용한 STD61강에 대한 마찰특성에 관한 연구
정우영(Woo Young Chung),민준원(Joon Won Min),김상호(Sang Ho Kim),한형욱(Hyung Wook Han),이명호(Meung Ho Rhce),송종호(Jong Ho Song),정원용(Won Young Jeung) 한국트라이볼로지학회 2008 한국트라이볼로지학회 학술대회 Vol.2008 No.11
Laser texturing technology produces shallow dimples that serve as reservoirs for fluid media and trap the wear debris on material faces, so increase the lubrication efficiency of the materials. STD6l steel specimen has been fabricated by using laser texturing method to investigate friction characteristics through gap, depth and diameter. Marking laser system for laser texture showed reasonable results to modify dimple depth and size of steel. On specific lubricant condition. laser textured materials kept longer low friction characteristic than non treated material. After laser texturing, polishing process is positively necessary to remove the spatters attached on the surface. When used on well-controlled dimple surface. the test process results in substantial reductions in friction.
레이저 점선 패턴가공된 금속표면의 윤활조건에 따른 마찰특성에 관한 연구
정우영(Woo-young Chung),김상호(Sang-Ho Kim),한형욱(Hyung-Wook Han),민준원(Joon-Won Min),정원용(Won-Yong Jeung),이명호(Meung-Ho Rhee) 한국레이저가공학회 2010 한국레이저가공학회지 Vol.13 No.2
A high speed laser texturing method that relies on laser scanner conditions, to form pattern shapes with micro-narrow surface detail such as dotted line features is demonstrated and analyzed. For example, this method may be used to piston ring and gear part for automotive. Data on friction characteristics of two laser patterns employed for STD61 steel will be shown. Comparison of pattern depths obtained by repetition overlapping process with laser scanner to the results on friction coefficient will be provide. It will be shown that friction characteristic in dotted line patterns can significantly depend upon interaction with the lubrication and laser pattern conditions. Laser pattern processing into a shallow depth provides only slight improvement in friction, while work into a deep shape indicates a significant improvement.