http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
한택희(Han Taek Hee),김홍중(Kim Hong Jung),김영종(Kim Young Jong),강영종(Kang Young Jong) 대한토목학회 2006 대한토목학회논문집 A Vol.26 No.4A
When concrete is confined, its strength is enhanced by confining stress. Thus, increasing confining stress makes concrete strength higher. But a brittle failure may occur in hollow RC(Reinforced Concrete) column although its concrete is confined by transverse reinforcements. This brittle failure results from the absence of internal confinement and it decreases the strength and the ductility of a hollow RC column. To overcome this brittle failure problem, a hollow RC column which has a internal steel tube was developed. In this study, an experiment was performed to investigate the existence of to internal confinement by a settled steel tube. Thirty six specimens were tested and test results show the existence of internal confinement by the increase of concrete strength. 구속된 콘크리트는 구속되지 않은 콘크리트에 비해 상당히 큰 강도를 갖는다. 따라서 콘크리트의 구속응력을 증가시키는 것은 강도의 증가를 유도할 수 있다. 하지만 중공교각의 경우, 심부구속력의 부재로 인하여 중공교각의 안쪽면에서 취성파괴가 발생하며, 이는 기둥의 강도 저하 및 연성의 저하를 초래한다. 이러한 문제를 극복하기 위하여, 강관 삽입 중공 RC(Reinforced Concrete) 기둥이 개발되었으며, 본 연구에서는 실험을 통하여 삽입 강관에 의한 내부 구속력의 효과를 검증하였다. 총 36개의 시험체를 제작하여 실험을 수행하였으며, 실험 결과를 통하여 삽입 강관의 구속력과 이로 인한 콘크리트의 강도 증가를 확인하였다.
한택희(Taek Hee Han),원덕희(Deok Hee Won),유상량(Sang Ryang Yoo),박영현(Young Hyun Park),이선호(Sonho Lee) 한국산학기술학회 2015 한국산학기술학회 학술대회 Vol.2015 No.1
콘크리트 충전 이중강관(DSCT; Double-Skinned Composite Tubular) 풍력 타워의 조립 시공을 위해 모듈연결부를 제안하고 성능을 평가하였다. 연결 방식에 따라 3종의 연결부를 설계하고 실험을 수행하였으며, 일체형 DSCT 타워와 그 성능을 비교하였다. 준 정적실험을 수행한 결과 실험결과, 용접·몰탈 주입 방식으로 연결한 모듈형 DSCT 타워는 일체형 타워와 비교하여 유사한 거동 및 성능을 갖는 것으로 나타났다. 최대하중의 경우 일체형 시험체에 비해 약 1%정도 하중이 감소하였으나, 변위 연성도 측면에서는 더 우수한 성능을 보여 주어 본 연결방식이 모듈 연결에 충분한 성능을 확보하고 있음을 보여 주었다.
한택희 ( Taek Hee Han ),김효산 ( Hyo San Kim ),장영두 ( Young Du Jang ),박윤호 ( Youn Ho Park ),강영종 ( Young Jong Kang ) 한국복합신소재구조학회 2010 복합신소재학회논문집 Vol.1 No.1
유한요소해석을 통하여, 지중 매설된 GFRP 관로의 거동과 좌굴안정성을 분석하였다. GFRP 관로에 토압과 차량하중과 같은 외압만이 작용하는 경우와, 외압과 함께 수압이 내압으로 작용하는 경우에 대해 해석을 수행하였으며, 해석 대상 관로는 현재 생산되는 GFRP 관로로 한정하고, 응력과 변위, 좌굴강도를 검토하였다. 또한, 관로 연결 플랜지의 응력집중 현상을 저감하기 위하여, 형상을 개선시킨 플랜지에 대해 해석을 수행하였다. 연결부 목 부위의 최대 응력을 검토하기 위한 캔틸레버 모델과, 지중 매설시의 모델 두 가지에 대해 해석을 수행하여 응력을 검토하였다. 해석결과 지중 매설된 GFRP 관로에 외압이 작용하는 경우와 좌굴에 대해서는 안전하였으며, 개선된 플랜지의 응력 집중도 상당히 저감되었음을 확인 할 수 있었다. Static analyses and buckling analyses were carried out for buried GFRP pipes by using finite element method. Vehicle loads, vertical and lateral soil pressures were considered as external loads, and supplying water pressure was considered as an internal load. Nine types of the factory-manufactured GFRP Pipes were analyzed. Their maximum stresses and displacements were compared with the limit displacements and ultimate stress. Additionally, stress analysis on an enhanced flange, which was designed to reduce stress concentration, was performed. A cantilever analysis was carried out to know the maximum stress on the neck of the flange, which is the critical part. And a static analysis was carried for the buried flange. The test results showed that GFRP pipes were safe and stable against the external loads. And they showed that the enhanced flange decreased about 35% of the stress concentration.