http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
한성웅,손세영,송성훈,김종민,김우식,Muramatsu, Hiroshi,장상목 한국화학공학회 2002 Korean Chemical Engineering Research(HWAHAK KONGHA Vol.40 No.6
에틸알코올의 첨가로 과포화가 유도되는 NaF 결정화 과정을 수정진동자를 이용하여 측정하였다. 준안정 상태의 NaF 용액에 에틸알코올을 첨가하면 NaF의 용해도가 감소하여 NaF 과포화가 형성되어 결과적으로 NaF 결정이 생성 및 성장한다. NaF 용액의 과포화에서 결정 생성 및 성장하는 변화를 감지하기 위하여 수정진동자의 금전극 표면을 염산시스테아민(cysteamine hydrochloride; 2-mercaptoethylamine hydrochloride)으로 self-assembly하여 수식하여 응용 가능성을 검토하였다. 과포화 과정을 통해 생성된 NaF 결정이 염산시스테아민 표면 위에 흡착되면 흡착된 양에 비례하여 수정진동자 주파수가 변화하기 때문에 주파수 변화를 측정함으로써 간접적으로 NaF 결정과정을 분석할 수 있었다. 알코올의 주입량을 1-5㎖로 변화시킴으로써 용액 중에 형성되는 NaF의 과포화 농도의 수준을 변화시켜 주었으며, 염산시스테아민 박막에 대한 주파수 변화를 분석함으로써 주입량에 따른 NaF 결정화 정도를 해석할 수 있었다. 이들 결과들을 통하여 수정진동자를 이용한 NaF 결정화 과정의 분석이 가능함을 알 수 있었다. The crystallization of NaF driven by adding ethanol was monitored using quartz crystal analyzer (QCA). Adding ethanol to NaF solution reduced the solubility of NaF and consequently led to nucleation and growth of NaF crystals. To investigate the crystallization behavior of NaF, a gold electrode of QCA was modified by anchoring with 2-mercaptoethylamine hydrochloride based on a self-assembly method. Frequency of QCA varied with the amount of NaF adsorbed on the self-assembled layer of 2-mercaptoethylamine hydrochloride, and thereby the process of NaF crystallization could be analyzed indirectly by monitoring the frequency change of QCA. To change the extent of supersaruration of NaF, the amount of ethanol added to the solution was varied from 1 to 5㎖. Then, the effect of the extent of the supersaturation on the crystallization was examined by analyzing the frequency changes of QCA coated with 2-mercaptoethylamine hydrochloride. It was shown that the QCA technique could be well applied for the characterization and analysis of the crystallization behavior of NaF.
박진영,한성웅,손세영,송성훈,김종민,Ohtani, Toshio,Muramatsu, Hiroshi,장상목 한국화학공학회 2002 Korean Chemical Engineering Research(HWAHAK KONGHA Vol.40 No.1
본 연구에서는 마이카 표면상에서 전기장에 의한 극히 낮은 농도의 DNA 신장에 대한 효율적인 방법론을 제시하였다. 전기장에 의한 DNA 신장을 AFM형상으로 분석한 결과, DNA 농도범위가 약 57×10 exp(-3)ng/mL-57×10 exp(-6)ng/mL일 때 매우 잘 적용되며, 신장된 DNA는 두 전극 중앙에 존재하였다. 또한, 일반 마이카, Mg^2+ 처리된 마이카, 그리고 AP-마이카 표면들에 대한 신장 효율의 차를 기술하였다. 동일한 실험조건 하에서 AP-마이카의 표면이 가장 좋은 효율의 DNA 신장 결과를 나타내었다. An effective method of DNA stretching using electric field on mica surface was proposed for extremely low solution concentration of DNA. DNA stretching based on electric field was observed by AFM and well applied on the concentration range from 57×10 exp(-3)ng/mL to 57×10 exp(-6)ng/mL. Stretched DNA existed in the middle of two electrodes. The difference in stretching efficiency for the different surfaces of bare mica, Mg^2+ soaked mica and AP-mica was discussed. The best performance of stretching was found from the surface of AP-mica under the same experimental condition.
논문 및 특허 분석을 통한 3D프린팅 산업 시장 동향 예측 연구
장상목,한성웅,손규현 한국지식재산교육연구학회 2022 지식재산 교육과 연구 Vol.10 No.2
3D프린팅 기술은 4차 산업혁명의 대표적인 제조 기술로 혁신의 핵심이 될 것이라는 예측이 많았다. 3D프린팅은 기존의 금형·사출·주조 방식에 비해 제조 효율성을 높일 수 있을 뿐만 아니라 새로운 제조 경험까지 가능하게 하는 차세대 기술로 주목받고 있으며, 최근 발생한 코로나19 감염병 상황에도 불구하고 산업용 3D프린팅에 대한 수요가 확산되고 있다. 한편, 3D프린팅 시장이 기대보다 활성화되지 못하고 있다는 우려와 향후 시장이 위축될 수 있다는 전망도 있다. 본 연구에서는 국내 3D프린팅과 관련된 현재까지의 연구·지식재산권의 추이와 산업 동향을 기반으로 향후 기대되는 3D프린팅 산업 시장 동향에 대해 연구하였다. 국내 3D프린팅 산업의 동향 예측을 위해 논문-특허-시장 규모 현황을 조사한 결과, 2014년 이후 2019년까지 세 항목 모두 유사한 형태의 지속적인 성장세를 보였으며, 논문 출간은 특허 등록에 선행하여 증가추세를 보였음을 확인하였다. 시장규모는 논문-특허의 증가에 종속되어 증가하지 않고 특허 등록의 증가 추세 이전에 선행적인 증가 추세를 보였다. 3D printing technology is a representative manufacturing technology of the 4th industrial revolution, and there were many predictions that it would become the core of innovation. 3D printing is attracting attention as a next generation technology that not only improves manufacturing efficiency compared to the existing mold, injection, and casting methods, but also enables new manufacturing experiences, and the demand for industrial 3D printing is spreading despite the recent outbreak of COVID-19. On the other hand, there are concerns that the 3D printing market is not as active as expected, and there is a prospect that the market may shrink in the future. In this study, expected market trends in the 3D printing industry have been investigated based on the research and intellectual property rights related to domestic 3D printing. By examining the previous studies on the relationship between paper-patent-market size, from 2014 to 2019, all three items showed a similar type of continuous growth, and it was confirmed that the publication of papers showed an increasing trend prior to patent registration. The market size did not increase depending on the increase in paper-patents, but showed a leading increase trend before the increase in patent registration.