http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
주기적인 외란 제거에 있어서 빠른 오프라인 학습 제어 접근 방식
하인중(In-Joong Ha),장정국(Jung-Kook Jang),박진원(Jin-Won Park),권정훈(Jung-Hoon Kwon) 대한전기학회 2007 대한전기학회 학술대회 논문집 Vol.2007 No.4
The recently-developed off-line learning control approaches for the rejection of periodic disturbances utilize the specific property that the learning system tends to oscillate in steady state. Unfortunately, the prior works have not clarified how closely the learning system should approach the steady state to achieve the rejection of periodic disturbances to satisfactory level. In this paper, we address this issue extensively for the class of linear systems. We also attempt to remove the effect of other aperiodic disturbances on the rejection of the periodic disturbances effectively. In fact, the proposed learning control algorithm can provide very fast convergence performance in the presence of aperiodic disturbance. The effectiveness and practicality of our work is demonstrated through mathematical performance analysis as well as various simulation results.
DVCR용 ATF(Automatic Track Following) 블록의 새로운 설계
조성일,김성욱,하인중,김정태,나일주,Cho, Seong-Il,Kim, Sung-Wook,Ha, In-Joong,Kim, Jeong-Tae,Na, Il-Ju 대한전자공학회 1998 電子工學會論文誌, S Vol.s35 No.8
최근에 영상 및 음성 데이터의 양은 크게 증가하고 있다. 이러한 경향에 따라 고밀도 자기기록 시스템이 필요하게 되었고 테이프의 트랙은 더욱 더 좁아지게 되었다. 따라서 DVCR(digital video cassette recorder)에서는 재생시에 캡스탄 모터의 속도와 위상을 정밀하게 제어하여, 헤드가 트랙을 따라 정확하게 주행하도록 유지시켜주는 캡스탄 서보시스템이 필요하게 되었다. 이를 위하여 DVCR에서는 ATF(Automatic Track Following)방식을 사용한다. 본 논문에서는 이산 푸리에 변환(discrete Fourier transform)을 이용한 새로운 DVCR용 ATF 블록의 설계방법을 제안하였다. 제안한 ATF 블록을 ALTERA사의 FPGA에 구현하여 실제 DVCR 시스템에서 그 성능을 시험하였다. 실험을 통하여 본 논문에서 제안한 방식이 기존의 디지털 저역통과필터(lowpass filter)를 사용한 구현법에 비해 비용면에서 더 효과적임을 검증하였다. 또한 로직게이트 수가 기존의 방법에 비하여 약 20% 감소함을 확인하였다. Recently, the amount of image and audio data has been increasing dramatically for high performance. According to this trend, a high-density magnetic recording system is necessitated and the tracks of magnetic tapes are getting narrower. This, in turn, requires the capstan servo system of the magnetic recording system such as DVCR to control precisely the speed and position of the capstan motor. Especially, in case of play-back, the capstan servo system should be able to position and maintain the head on the desired place of the track. To meet this requirement, digital camcorders use ATF (Automatic Track Following). In this paper, a new ATF block using discrete Fourier transform is proposed. The proposed ATF block was designed and implemented in ALTERA FPGA chips and fully tested in a real DVCR system. It is shown through experiments that the new ATF block is more cost-effective than other existing ATF blocks using digital lowpass filters. In particular, the number of logic gates can be reduced by 20% in average, compared to the existing ATF's.
자동조종장치 동역학을 고려한 궤환 형태의 BTT 미사일용 최적 종말 유도 법칙
유성재(Seong-Jae Yoo),홍진우(Jin-Woo Hong),하인중(In-Joong Ha) 한국항공우주학회 2016 韓國航空宇宙學會誌 Vol.44 No.3
BTT 미사일은 STT 미사일과 달리 피치와 롤 채널이 동역학적으로 결합되어 있기 때문에 유도 법칙 개발 시 3차원 추적 기하학을 고려하여야 한다. 기존 연구결과들과는 달리 본 논문에서는 3차원 추적 기하학뿐만 아니라 자동조종장치의 피치와 롤 채널 동역학을 모두 고려한 BTT 미사일의 최적 종말 유도 법칙을 제안한다. 그 결과, 제안하는 유도 법칙은 상대적으로 느린 자동조종장치 동역학에서도 시간 지연 효과로 인한 성능 하락 없이 작은 요격 오차의 높은 요격 성능을 보장한다. 또한, 제안하는 최적 유도 법칙은 잔여 비행시간의 함수를 계수로 하는 궤환 형태로 구해진다. 끝으로 다양한 요격 상황에서의 모의실험을 통해 그 성능을 입증한다. In contrast with STT missiles, the guidance law design for BTT missiles should be based on 3-dimensional pursuit kinematics, since the pitch and roll channels of BTT missiles are coupled dynamically. More generally than the prior works, the dynamics of pitch and roll channels, as well as 3-dimensional pursuit kinematics are considered in the design of our terminal-phase optimal guidance law for BTT missiles proposed in this paper. Thereby, the proposed optimal guidance law guarantees high capturability with small miss distance without significant performance degradation due to time-lag effect even in case of relatively slow autopilot dynamics. Moreover, the resulting optimal guidance law is expressed explicitly in feedback-form with the coefficients given as the functions of time-to-go. The effectiveness and practicality of our work is demonstrated through various simulation results.
김창환(Chang-Hwan Kim),하인중(In-Joong Ha),하태균(Tae-Kyoon Ha),고명삼(Myoung-Sam Ko),김동일(Dong-Il Kim) 대한전자공학회 1992 대한전자공학회 학술대회 Vol.1992 No.10
In this paper, we present a DSP-based high dynamic performance torque control scheme of variable reluctance motors(VRM's) for DD(Direct Drive) robots via function inversion technique. The VRM with our controller behaves like DC motors, and hence developed torque tracks given torque command accurately with no torque ripples. Furthermore, our torque control algorithm ensures the production of maximum constant torque under maximum current limitation, minimizes power loss in each phase resistance, and takes magnetic saturation effect into account. Also, since our control algorithm is represented in the form of look-up table, it can be easily implemented with simple digital circuits and this tabular design method is computationally more accurate and simpler compared to the prior methods.