http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
최현일 ( Hyeon-il Choi ),연익준 ( Ik-jun Yeon ) 한국환경기술학회 2013 한국환경기술학회지 Vol.14 No.3
본 연구에서는 2011~2012년 총 2년에 걸쳐서 국내의 작업유형별로 50개 사업장을 선정하여 제조사업장, 가공사업장, 인쇄사업장, 운송사업장, 판매사업장 및 기타사업장 등의 6개 군으로 분류하여 작업장 및 부지경계 등에서 소음을 측정하였고 각 사업장별 소음특성에 대한 분석을 통하여 얻은 결론은 다음과 같다. 제조사업장의 소음측정 결과의 평균은 플라스틱 제조사업장 51.5∼71.3dB(A), 금속가공 이용제조사업장 56.2∼76.5dB(A), 기타 제조사업장은 57.2∼84.5dB(A)로 나타났으며, 인쇄사업장은 야간소음 기준으로 최소 56.3dB(A)에서 최대 60.2dB(A)의 소음도를 보이고 있으며 다른 사업장대비 소음 레벨은 비교적 낮으나 야간 시간대에 발생되고 있어 소음피해 및 민원발생률이 높은 것으로 예상된다. 운송사업장으로 화물자동차운송업체의 경우, 업체 특성상 화물이 새벽에 주로 몰리기 때문에 대기중인 트럭의 엔진음과 하역 시 발생하는 작업소음이 가장 큰 영향을 미치고 있으며, 이의 경계부지에서 소음은 62.7dB(A), 주거지역에서는 52.3~63.0dB(A)로 측정되어 기준 대비 높은 소음을 보여주고 있다. 판매사업장은 모두 주간 시간대에 발생하고 있으며 가장 높은 소음 특성을 보이고 있는 곳은 대형마트 사업장이었고, 이 사업장의 경계부지 75.2dB(A)으로 높은 소음 피해를 유발시키고 있었다. Noise levels in working environments were measured in 50 different small workplaces from 2011 to 2012. The workplaces, in which moise levels was measured, were classified into six categories : manufacturing company, processing plant, printing company, transportation businesses, sale businesses and others. The legal standards based on neighborhood noise caused by facilities and noise exposure limits for factory workers was applied to estimate measured noise level. As a result, most of noise levels measured in workplaces were excessive the noise ceiling. The major noise sources were fan, press, cutting machine and outdoor unit cooler. The ranges of measured noise level was 51.5∼ 71.3dB(A) of plastics manufacturing and 56.2∼76.5dB(A) of metalworking in manufacturing companies, 56.3~60.2dB(A) in printing companies, 52.3~63.0dB(A) in transportation businesses, 75.2dB(A) in businesses for sales. Although the noise level meaused in printing companies is relatively low(minium 56.3dB(A) and maximum 60.2dB(A)), it is likely to cause civil complaint due to 24-hour continuous operations. And the noise level measued in sale businesses is expected to cause damage of noise because it shows the highest values(75.2dB(A))
최현일 ( Hyeon-il Choi ),임병서 ( Byung-seo Lim ),연익준 ( Ik-jun Yeon ) 한국환경기술학회 2014 한국환경기술학회지 Vol.15 No.3
본 연구에서는 2011~2012년 총 2년에 걸쳐서 주거 시설 내에 위치하는 50개 사업장을 대상으로 현장을 방문하여 소음 발생 현황에 대한 조사와 측정을 하고 소음 발생장치나 기계류의 종류에 대하여 분류하여 사업장내 존재하고 있는 소음저감 시설에 대한 현황을 조사 및 측정하여 분석하였으며, 이에 대한 연구의 결론은 다음과 같다. 제조사업장의 경우 소음에 의한 피해는 주로 주간에 발생하고 있었으며 소음을 발생하는 설비는 송풍기, 압축기, 절단기, 분쇄기 및 성형기가 주요 소음원이었다. 소음도는 81.2∼106.2 dB(A)이었으며 주요 주파수 대역은 1 kHz 대역이 가장 많이 나타나고 있다. 가공 사업장 역시 주간에 주로 소음피해가 발생하고 있었으며 소음도는 77.1∼98.0 dB(A)로 주요 주파수 대역은 2 kHz 이상 대역이 가장 많이 나타나고 있었고, 인쇄사업장은 24시간 작업이 이루어지는 경우가 많아서 야간에 소음민원이 주로 발생하고 있었으며 소음도는 78.0∼92.1 dB(A)로 주요 주파수 대역은 2 kHz 대역이 가장 많이 나타나고 있었다. 운송 사업장에서 발생되는 소음은 화물트럭의 대기 중 엔진소음과 작업소음으로 소음도는 74.2∼83.7 dB(A)로 주요 주파수 대역은 1 kHz 이하 대역이었으며, 판매 사업장소음도는 67.1∼86.0 dB(A)로 주요 주파수 대역은 1 kHz 이하 대역이 가장 많이 나타나고 있다. This study analyzes the variety of noise sources and characterizes levels and factors for the noise from factories. Noise levels in working environments were measured in 50 different industrial workplaces from 2011 to 2012. The measurement industrial workplaces were divided into six categories : manufacturing company, processing plant, printing company, transportation businesses, businesses for sales and others. Noise measurement was performed according to the standardized environment pollution test with a 1/1 and 1/3 octave analyzer. The legal standards are based on neighborhood noise caused by facilities and noise exposure limits for factory workers. As a result, most of the sites exhibited noise levels higher than the permissible noise regulation standard. The major noise sources were found to be fan, press, cutting machine and outdoor unit cooler. The measurement results show 81.2~106.2 dB(A) with a main frequency band of 1 kHz in manufacturing companies, 77.1~98 dB(A) with 2 kHz in processing plants, 78~92.1 dB(A) with 2 kHz in printing companies, 74.2~83.7 dB(A) with less than 1kHz in transportation businesses, 67.1~86 dB(A) with less than 1kHz in businesses for sales, and 74.8~97.2 dB(A) with 500 Hz in other sites.
작업장에서의 n-부틸 글리시딜 에테르에 대한 건강 위험성 평가
문형일 ( Hyung Il Moon ),최현일 ( Hyeon Il Choi ),신새미 ( Sae Mi Sin ),변상훈 ( Sang Hoon Byeon ) 한국산업위생학회 2013 한국산업보건학회지 Vol.23 No.1
OObbjjeeccttiivveess: This study was conducted to evaluate the health risk of workers exposed to butyl glycidyl ether to prevent them from developing occupational diseases. MMeetthhooddss: The workplaces that coat floor with epoxy were selected and the samples were collected and analyzed with NIOSH 1616 Method. We calculate workplace reference concentration using with NOAEL estimated by the study of Anderson et al. in 1978. Risk was calculated by the ratio of exposure to workplace reference concentration. Monte-Carlo simulation was performed to derivate the median, cumulative 90%, and cumulative 95% value by using Crystal Ball. RReessuullttss: Butyl glycidyl ether is a skin, eye irritator and can result in central nervous system depression, allergic reaction. NOAEL was 38 ppm and workplace reference concentration was calculated as 0.73 ppm corrected with uncertainty factors. Geometric mean was 1.152 ppm and geometric standard deviation was 1.522 by the workplace environment measurement. The median, cumulative 90%, and cumulative 95% value of risk were calculated as 1.617, 1.934, and 2.092, respectively. CCoonncclluussiioonnss: Not only cumulative 90% and cumulative 95% value but also the median of risk is higher than 1.0 by the risk characterization, so it can do a lot of harm to workers. Therefore, the process of derivating workplace reference concentration and the appropriacy of the uncertainty factors should be re-examined.
시화산업단지에서 주요 휘발성유기물질의 시간적, 공간적 농도 파악을 위한 능동식과 수동식 시료채취기 비교
변상훈(Sang Hoon Byeon),최현일(Hyeon Il Choi),문형일(Hyung Il Moon),이정근(Jung Geun Lee),김정근(Jung Keun Kim) 大韓環境工學會 2011 대한환경공학회지 Vol.33 No.11
본 연구에서는 시화지구의 공단과 주거 지역에서의 휘발성 유기화합물 농도를 능동식과 수동식 시료채취기를 이용해 측정하고 그 특성을 비교 분석하였다. TVOC의 평균농도는 패시브샘플러(passive sampler)의 경우 공단지역이 주거지역보다 1.86배 더 높게 나타났다. 능동식 시료채취기의 경우 공단지역이 주거지역보다 1.07배 더 높게 나타났다. Passive sampler를 이용하였을 경우 공단지역이 주거지역보다 대부분의 물질에서 농도가 높게 나타났지만 열탈착 흡착 튜브(thermal desorption tube)를 이용했을 경우는 트리클로로에틸렌, 톨루엔, 에틸벤젠, 자일렌 등 일부 물질의 농도에 있어서 주거지역이 오히려 높게 나타났다. 전체 BTEX 비율 중에서 전반적으로 톨루엔이 차지하는 비율이 가장 컸으며, passive sampler의 경우 공단지역이 주거지역보다 톨루엔, 에틸벤젠, 자일렌의 상대비율이 높게 나타났다. 그러나 열탈착 흡착 튜브의 경우는 오히려 주거지역이 더 높게 나타났다. 본 연구를 통해서 대기오염 목적성분의 시간적, 공간적 농도 특성 파악을 위한 passive sampler를 이용하면 오염관리 혹은 역학적 연구에 도움이 되는 적절한 시료채취 방법이라는 사실을 알 수 있었다. In this study, we measured the concentrations of volatile organic compounds (VOCs) in Shiwha area by using active and passive sampler. We did a comparative analysis of the characteristics of the active sampler and passive sampler. In the case of the passive sampler, the average TVOC concentration of the industrial area was 1.86 times higher than that of the residential area. In the case of the active sampler, the average TVOC concentration of the industrial area was 1.07 times higher than that of the residential area. When using the passive sampler, the concentration of VOCs in the industrial area was noted to be higher than the concentration found in the residential area. However, when we used the thermal desorption tube, the concentration of residential area was higher rather than that of industrial area in some substances such as trichloroethylene, toluene, ethylbenzene, and xylene. Toluene was a larger percentage of the overall BTEX ratio. In case of the passive sampler, the relative ratio of toluene, ethylbenzene, and xylene was higher in the industrial area than in the residential area. In contrast in case of the thermal desorption tube, the ratio of these substances was higher in the residential area rather than in the industrial area. The passive sampling in this study showed an appropriate method to analyze the temporal and spatial concentrations of air contaminants. This assessment would prove to be useful for its observance of standards or epidemical study.