http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
퍼지 GIS 공간분석에 의한 지목변경 대상필지 선정방법에 관한 연구
조태인(Cho, Tae In),최병길(Choi, Byoung Gil) 대한공간정보학회 2011 대한공간정보학회지 Vol.19 No.3
이 연구의 목적은 퍼지 소속함수와 GIS 공간분석을 이용하여, 국공유지의 도로현황을 중심으로 토지이동현황조사 시 지목변경 대상필지를 선정하는 방법을 연구하는데 있다. 인천 중구의 구도심지역과 계양구의 신도심ㆍ임야지역을 연구 대상지역으로 선정하여, 연속지적도, 한국토지정보시스템의 도시계획 도로 레이어, 도로명주소관리시스템의 실폭도로 레이어, 토지대장 전산자료를 GIS 공간분석 하였다. 도로 및 실폭도로 레이어에 편입된 연속지적도 각 필지의 면적 비율을 임계값으로, 퍼지소속함수를 이용하여 지목변경 대상필지 적합지수를 계산하였다. 마지막으로 적합지수를 시각화한 화면과 정사항공사진을 참조자료로 활용하여, 실제 이용현황과 지목이 상이한 필지를 지목변경 대상필지로 최종선정 하였다. 최종선정 결과, 이 연구에서 제안한 퍼지 GIS 공간분석방법은 기존의 수기 방법에 비하여, 선정기간이나 방법론적으로 효율적인 것으로 판단되며, 임야지역보다는 도심 지역에, 도심지역 중 에서도 구도심보다는 신도심에 적합한 방법임을 확인할 수 있었다. The purpose of this study is to research into a method of selecting the subject parcel with a change in the category of land given surveying the land alteration state focusing on the present state of road in the government-owned and public land by using the fuzzy membership function and GIS spatial analysis. It selected the old town center of Incheon Jung-gu, and the new downtown & the forest land of Gyeyang-gu as the research subject region, and carried out GIS spatial analysis on a serial cadastral map, urban planning road layer of Korea Land Information System, practical width of road layer of Road Name Address Management System & cadastral data base, and then calculated the suitable index for the subject parcel with a change in the category of land by using the fuzzy membership function with having the critical value as the area ratio of each parcel on a serial cadastral map that was incorporated into road layer or practical width of road layer. It finally selected the parcel, which is different in land rogetac from the real land usage, as the final subject parcel for altering land category, by using the screen of visualizing the suitable index and the aerial ortho photograph. As a result of the final selection, the fuzzy GIS spatial analysis method, which was suggested in this study, is judged to be efficient in the selection period and the methodology compared to the existing manual method. It could be confirmed to be more suitable method for downtown than forest land and for the new downtown than the old town center.
Sub-threshold 영역의 MOSFET 동작을 이용한 OP-AMP 설계
조태일(Tae Il Cho),여성대(Sung Dae Yeo),조승일(Seung Il Cho),김성권(Seong Kweon Kim) 한국전자통신학회 2016 한국전자통신학회 논문지 Vol.11 No.7
본 논문에서는 IoT(Internet of Things) 시스템의 기본 구성이 되는 센서 네트워크에 사용될 수 있는 MOSFET(Metal Oxide Semiconductor Field Effect Transistor)의 Sub-threshold 동작을 이용하는 OP-AMP(Operational amplifier) 설계를 제안한다. MOSFET의 Sub-threshold 동작은 전원전압을 낮추는 효과로 회로 시스템을 초저전력으로 유도할 수 있는 특징이 있기 때문에 배터리를 사용하는 IoT의 센서 네트워크시스템의 초저전력화에 매우 유용한 회로설계 기술이라고 할 수 있다. 0.35 μm 공정을 이용한 시뮬레이션 결과, VDD를 0.6 V로 설계할 수 있었으며, OP-AMP 의 Open-loop Gain은 43 dB, 또한 설계한 OP-AMP의 소비전력은 1.3 μW가 계산되었다. 또한, Active Layout 면적은 64 μm x 105 μm이다. 제안한 OP-AMP는 IoT의 저전력 센서 네트워크에 다양한 응용이 가능할 것으로 기대된다. In this paper, we suggest the design of OP-AMP using MOSFET in the operation of sub-threshold condition as a basic unit of an IoT. The sub-threshold operation of MOSFET is useful for an ultra low power consumption of sensor network system in the IoT, because it cause the supply voltage to be reduced. From the simulation result using 0.35 um CMOS process, the supply voltage, VDD can be reduced with 0.6 V, open-loop gain of 43 dB and the power consumption was evaluated with about 1.3 μW and the active size for an integration was measured with 64 μm × 105 μm. It is expected that the proposed circuit is applied to the low power sensor network for IoT.