http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Hybrid-RBC와 BAF의 조합공정을 이용한 고농도 도축폐수의 처리 특성
정찬일(Chan Il Jung),안조환(Jo Hwan Ahn),배우근(Woo Keun Bae),김승진(Seung Jin Kim) 大韓環境工學會 2011 대한환경공학회지 Vol.33 No.2
본 연구에서는 부착/부유 미생물 혼재형 RBC (Rotating Biological Contactor)와 BAF (Biological Aerated Filter) 공정이 가지는 각각의 장점을 조합한 호기성 생물막 처리 시스템을 고안하여 고농도 도축폐수의 처리 특성을 평가하였다. 본 공정은 상당량의 부유 미생물이 함께 있는 RBC와 침전지 그리고 BAF 공정 순으로 구성되었다. 첫 번째 공정인 RBC와 침전지에서는 유기물의 산화, 질소의 질산화/탈질 및 부유물질의 제거가 이루어지며, 후속 공정인 BAF에서는 일부 제거되지 않은 유기물과 질소의 산화 및 부유물질의 여과가 이루어진다. 돈까스 소스(시판용)와 돼지피을 이용하여 모사한 고농도 도축폐수 (TCOD 5.2~40.4 g/m2·d, TN 0.44~4.17 g/m2·d)의 처리 특성을 평가한 결과, 침전지를 포함한 RBC 공정에서 Soluble COD와 NH₃-N의 평균 제거율은 각각 90%와 82% 이상으로 양호하였으나 TCOD와 TN은 Suspended Solid (SS)의 대량 유출과 돼지피에서 기인한 콜로이드 물질 생성 때문에 각각 60%와 69%의 다소 낮은 제거율을 보였다. 후속 공정인 BAF가 잔존 TCOD와 TN을 제거하는 생물 반응조의 역할과 SS를 제거하는 여과기의 역할을 충분히 수행해 약 100 mg/L의 TCOD와 약 140 mg/L의 SS 추가 제거가 가능하였으나, 처리수질은 TCOD 300 mg/L, SS 180 mg/L 그리고 TN 53 mg/L로 상당히 높았다. RBC 유출수에 Polyaluminium Chloride를 투입한 결과, 침전성이 크게 향상되어 RBC+침전지 공정 유출수의 TCOD와 TN은 각각 93.8%, 25.6%의 제거율을 보였으며, BAF 유출수 수질은 TCOD 16.5 mg/L, SS 0 mg/L, NH₃-N 12.0 mg/L, TP 1.3 mg/L로 우수하였다. 따라서 별도의 추가 처리공정 없이 본 연구에서 고안한 RBC+BAF 조합공정에 의한 처리만으로 고농도 도축폐수를 성공적으로 처리할 수 있었다. This study was conducted to develop a novel combined system of a hybrid rotating biological contactor (RBC) process that was composed of an attached- and suspended- biomass reactor, followed by a settler and a biological aerated filter (BAF) column to treat a high strength slaughter wastewater. Long term influences of organic and nitrogen loading rates were investigated to see how the combined system worked in terms of the removal efficiency. A synthetic wastewater containing a pork cutlet steak source (commercially available) and swine blood was used to feed the combined system. The hybrid RBC process showed excellent removals: about 95% for soluble COD and 85% for ammonium nitrogen. However, the unsettled solids seriously deteriorated the removal efficiency of total COD (TCOD) and total nitrogen (TN) in the RBC process. A significant fraction of the TCOD and suspended solids (SS) was further removed in the BAF column although the effluent quality was still unsatisfactory, giving TCOD 300 mg/L, SS 180 mg/L and TN 59 mg/L. An addition of polyaluminium chloride into the RBC effluent improved the performance of the settler and BAF, producing an excellent quality of final effluent; TCOD 16.5 mg/L, SS 0 mg/L, TN 55.5 mg/L, TP 1.3 mg/L. Therefore, it was confirmed that the combined system of hybrid RBC and BAF could treat a high strength slaughter wastewater excellently.
직사각형 단면을 갖는 미세채널에서 완전 발달된 다층유동에 관한 해석
김중경,정찬일,장준근,유정열,Kim, Jung-Kyung,Jung, Chan-Il,Jang, Jun-Keun,Yoo, Jung-Yul 대한기계학회 2003 大韓機械學會論文集B Vol.27 No.5
An analytical solution for a vertically stratified viscous flow in a microchannel with a rectangular cross-section is constructed, assuming fully developed laminar flow where the interfaces between the fluid layers are flat. Although the solution is for n-layer flow, restricted results to symmetrical three-layer flow are presented to investigate the effects of the viscosity and thickness ratios of the fluid layers and the aspect ratio of the microchannel on the flow field. Relations between the flow rate and thickness ratios of the fluid layers with varying viscosity distributions are found, considering the cross -sectional velocity profiles which vary noticeably with the three parameters and differ significantly from the velocity profiles of the flow between infinite parallel plates. Interfacial instability induced by the viscosity stratification in the microchannel is discussed referring to previous studies on the instability analysis for plane multilayer flow. Exact solution derived in the present study can be used for examining a diffusion process and three -dimensional stability analysis. More works are needed to formulate the equations including the effects of interfacial' tension between immiscible liquids and surface wettability which are important in microscale transport phenomena.
김성일(Sung Il Kim),이욱현(Wook Hyun Lee),전원표(Won Pyo Chun),정찬일(Chan Il Jung) 대한기계학회 2011 대한기계학회 춘추학술대회 Vol.2011 No.5
통신시설을 비롯한 산업용 설비냉방을 위한 냉방장치는 연중 24시간 가동 되며 여름철은 물론 겨울철에도 냉방장치를 가동한다. 이러한 장치들은 냉동기의 부하를 대부분 냉각탑에 의존하고 있다. 이에 따른 설비의 연중 운전비 부담은 매우 크다. 외기를 이용하는 하이브리드 냉각탑은 압축기의 가동률을 대폭 줄일 수 있으므로 에너지소비량을 절감할 수 있다. 하지만, 하이브리드 냉각탑이 잘 알려진 기술임에도 불구하고 부하에 따른 운전특성 및 시스템 설계의 체계적인 연구는 국내에서 미미하다. 본 연구에서는 20RT 급 냉방장치에 사용되는 공냉식 열교환기를 수치적 방법을 이용해 설계하였다. 또한, 실험에서 얻어진 데이터를 이용해 외기이용 하이브리드 냉방장치와 기존 압축기형 냉방장치의 에너지소비량을 기상청의 주요도시별 평년기온을 바탕으로 비교하였다. 연구결과 외기이용 하이브리드 냉방장치의 에너지소비량은 압축기형 냉방장치의 54.3%이었으며 최대오치는 3.93%이었다. Industrial air-conditioning systems are in full operation all year around even in winter. The annual operating cost of this equipment is very big burden. A hybrid cooling tower can reduce the energy consumption due to the low operation of compressors, especially in winter. However, despite hybrid cooling towers are a well-known technology, many studies on operation characteristics and system design about the cooling load have to be done in the country. In this study, an air-cooled heat exchanger used in a 20RT hybrid cooling tower has been designed by numerical methods. In addition, the energy consumption obtained from experimental data between hybrid cooling towers and conventional cooling towers has been compared on a basis of the average temperature of major cities. The results demonstrated that the energy consumption of the 20RT hybrid cooling towers was 54.3% as compared with conventional cooling towers and its maximum error was 3.93%.
압축성 여재 여과를 이용한 하수의 고형물질 제거 타당성 연구
김예슬(Ye Seul Kim),정찬일(Chan Il Jung),오재일(Je Ill Oh),윤여민(Yeo Min Yoon) 大韓環境工學會 2014 대한환경공학회지 Vol.36 No.2
최근 미국과 일본을 중심으로 높은 공극과 압축성이라는 장점을 지닌 압축성 섬유여재 여과에 대한 다양한 기술이 개발되면서 이를 이용한 집약적 하·폐수 처리에 대한 관심이 높아지고 있다. 이에 따라 본 연구에서는 다양한 유입수질의 하수에 대하여 압축성 섬유여재 여과의 적용성을 검토하고자 하며, 해당 유입수에 대한 최적의 운전조건을 도출하고자 한다. 이를 위하여 예비 실험으로서 추적자 시험을 진행하였으며, 이를 통하여 다양한 압축률 및 여과 율에서의 여과 양상을 검토하였다. 그 결과 높은 압축률에서 높이에 따라 다른 공극률이 적용되어 이론적인 결과값과의 뚜렷한 차이를 관찰할 수 있었다. 하수처리장의 침사지 유출수를 대상으로 다양한 압축률 조건에서 압축성 섬유여재 여과의 TSS 제거 및 제거 입자크기분포를 살펴본 결과, 압축률 30%가 최적의 운전조건으로서 제거효율 70% 이상을 나타냈으며, 작은 크기의 입자 제거율 증대를 위해 최소 15% 이상의 압축률이 요구되었다. 또한 여과 유출수 농도의 주요 영향인자인 10 μm 이하 입자의 제거 효율을 증대시키기 위해서는 응집과 같은 추가 공정이 필요하다고 판단되었다. 모델링 결과를 통하여 압축률이 증가할수록 여과 초기에 입자크기에 따른 TSS 제거효율이 두드러지게 나타남을 관찰하였고, 유입수의 입자크기분포에서 가장 큰 비율을 차지하는 10 μm크기 입자를 대상으로 높이에 따른 모델링 결과 높이 150-300 mm 여재층이 해당 입자 크기에 대하여 가장 활발한 여과 작용을 나타내었다. Recently, as a variety of techniques of CMF (Compressed media filter) that has advantages of high porosity and compressibility have been developed in the U.S. and Japan. Therefore, the interest of intensive wastewater treatment using CMF has grown. This study examined the feasibility of CMF with varying sewage water quality to determine the optimum operating conditions. A preliminary tracer test that investigated the filtering process under various compression and flow rate conditions was performed. In a high compression condition, different porosities were applied to each depth of the column. Therefore, a distinct difference between a theoretical value and results of tracer test was observed. For the TSS (Total suspended solid) removal and particle size distribution of CMF for pre-treatment water under the various compression conditions, the compression ratio of 30percent as the optimal condition showed greater than 70% removal efficiency. In addition, the compression ratio of >15% was required to remove small-sized particles. Also, an additional process such as coagulation is necessary to increase the removal efficiency for<10 μm particles, since these small particles significantly influence the effluent concentration. Modeling results showed that as the compression rate was increased, TSS removal efficiency in accordance with each particle size in the initial filtration was noticeably observed. The modeling results according to the depth of column targeting 10 μm particles having the largest percentage in particle size distribution showed that 150-300 mm in filter media layer was the most active with respect to the filtering.
임대현 ( Lim Dae Hyun ),정찬일 ( Jung Chan Ill ),이규일 ( Lee Gyu Il ),지광습 ( Zi Goangseup ) 한국구조물진단유지관리공학회 2018 한국구조물진단유지관리공학회 학술발표대회 논문집 Vol.22 No.1
The purpose of this study is to develop a durable packaging concrete using silica - based LCD waste glass. In order to verify the performance of the waste glass mixed pavement concrete, four types of concrete mixture were classified into general concrete, fly ash concrete, LCD concrete and LCD + fly ash concrete. The performance of the durable concrete pavement was tested for compressive strength, alkali - silica reaction, freezing - thawing, saltation and abrasion resistance. The purpose of this study was to develop a high - performance pavement concrete manufacturing technology using LCD waste glass powder.