http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
일반인 리얼리티 연애 프로그램의 시청자 경험에 대한 연구: 20~30대 시청자 심층 인터뷰를 중심으로
장형민,이재신 한국커뮤니케이션학회 2023 커뮤니케이션학연구 Vol.31 No.3
본 연구는 최근 일반인이 출연하는 리얼리티 연애 프로그램이 높은 인기를 얻고 있는 상황에 주목하여, 이들 프로그램에 대한 시청경험을 탐구하고자 한다. 이를 위해 일반인이 출연하는 리얼리티 연애 프로그램을 시청한 경험이 있는 20~30대 미혼과 기혼자들을 대상으로 심층 인터뷰를 진행했다. 연구 결과, 시청자들은 출연자가 일반인이라는 점에서 동질감을 느끼고 이들의 일상적인 대화나 행동을 본인의 경우에 대입하며 공감을 경험하고 있었다. 이때 공감은 연애에만 한정된 것이 아니라 대인관계의 차원에서도 이루어졌으며, 감정이입을 바탕으로 자아성찰과 대리만족도 경험하고 있었다. 이러한 경험은 시청몰입으로 이어지기도 하며 심한 경우 과몰입에까지도 이르고 있었다. 연구 참여자의 대부분은 프로그램 시청을 통해 가치관의 변화를 겪었으며, 타인에 대한 이해가 확장된다고 보고했다. 이러한 결과는 미디어가 개인의 신념과 가치관에 변화를 주고, 나아가 다시 사회적 가치관의 형성에도 기여하고 있음을 보여준다.
등방성 방사 패턴을 갖는 유도 결합 형태의 태그 안테나
장형민,이범선 경희대학교 레이저공학연구소 2006 레이저공학 Vol.17 No.-
This paper presents an isotropic inductively-coupled RFID tag antenna (53mm×50mm) operating at UHF band. The designed isotropic tag antenna impedance is 3+j189.2Ω at 911 MHz and its simulated maximum radar cross section (RCS) is -18.6dB㎡, -25.68dB㎡, -35.17dB㎡ at short, match, open cases respectively. The 3 dB RCS bandwidth is satisfied in commercial frequency range in korea. The proposed tag antenna provides excellent isotropic RCS pattern characteristics.
히스토그램 기반 코드 영역 보상 기법을 적용한 W-CDMA 기지국용 CFR 알고리즘
장형민,이원철,Chang, Hyung-Min,Lee, Won-Cheol 한국통신학회 2007 韓國通信學會論文誌 Vol.32 No.12c
이동통신 기지국 시스템에서 송신 신호의 PAR 성능을 (peak-to-average power ratio) 개선함으로써 범용 전력 증폭기의 사용이 가능하게 되며, 이로 인해 전체적인 기지국 비용의 절감을 기대할 수 있다. 일반적으로 PAR 값을 줄임으로 인해 기지국 송신신호의 인근 대역 간섭 제한 성능을 나타내는 ACLR이나 (adjacent channel leakage ratio) 품질을 나타내는 EVM이나 (error vector magnitude) PCDE 성능의 (peak code domain error) 열화를 발생시킨다. 본 논문에서 이러한 문제점을 해결하기 위하여 필터링 기반의 CFR 방식인 (crest factor reduction) FDCFR 알고리즘을 (filter-dependent CFR) 소개하며, 히스토그램 기반 코드 영역 보상(HBWCDC; histogram based waterfilling code domain compensation)기법을 제안한다. 본 논문에서 제안한 CFR 알고리즘은 PAR 감소뿐만 아니라 앞서 언급한 ACLR, EVM 및 PCDE등의 성능 열화를 방지한다. This paper proposes a novel crest factor reduction (CFR) algorithm to be deployed on WCDMA basestation. Generally speaking, it is well described that the reduction of peak-to-average ratio (PAR) yields the possibility of using low cost power amplifier such that the basesation becomes economic However, the simple reduction of PAR could degrade the signal quality measured by either peak code domain error (PCDE) or error vector measurement (EVM), and the level of channel interference constrained by adjacent channel leakage ratio (ACLR). Regarding these imperfections, this paper introduces an effective CFR algorithm in which the function of filter-dependent CFR (FDCFR) incorporated with the histogram-based waterfilling code domain compensation (HBWCDC) carries out. To verify the performance of the proposed CFR technique, substantial simulations including comparative works are conducted with obeying W-CDMA basestation verification specification. To exploit the superiority, the performance of the proposed method is tentatively compared with that associated to the simple memoryless clipping method and the memory-required filter-dependent clipping method.
304L 스테인리스강의 열처리에 따른 입계부식민감도 연구
장형민,김동진,김홍표 한국부식방식학회 2020 Corrosion Science and Technology Vol.19 No.1
Even though 304 low-carbon (304L) stainless steel was developed to enhance the resistance to intergranular corrosion and stress corrosion cracking, it is occasionally subject to degradation in harsh environments. The degree of sensitization (DOS) of 304L stainless steel was studied as a function of sensitization using a double-loop electrochemical potentiokinetic reactivation (DL-EPR) method. Sensitizing heat treatment was performed in an Ar atmosphere at 500°C, 600°C, and 700°C, with heat treatment times varying from 0 to 96 h. DOS was measured by the ratio of the peak current density value of the forward scan to that of the reverse scan. After the EPR experiment, the specimen surface was observed by scanning electron microscopy and energy dispersive spectroscopy. The DOS of the specimens heat-treated at 600°C increased with heat treatment times up to 48 h and then decreased due to a self healing effect. The DOS was higher in specimens heat-treated at 600°C than those at 500°C or 700°C. Corrosion of the sensitized specimens occurred mainly at the δ-γ phase boundary. The corrosion morphology at the δ-γ phase boundary changed with sensitizing heat-treatment conditions due to differences in chromium activity in γ austenite and δ ferrite.