http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
리튬 배터리 충방전 특성을 고려한 양방향 DC/DC 컨버터 설계
임재관(Jaekwan Im),임덕영(Deokyoung Lim),최재호(Jaeho Choi),권경민(Kyoung-min Kwon),정교범(Gyo-Bum Chung) 전력전자학회 2010 전력전자학술대회 논문집 Vol.2010 No.7
본 논문은 에너지 저장장치로 각광받는 Li 배터리를 이용한 양방향 DC-DC컨버터의 구성 및 빠른 통특성을 갖는 이중 루프 PI제어기 설계를 제시하였다. 제어기는 초기 충전을 위한 정전류 제어기와 초기 충전 이후에 동작을 개시하는 전력제어기를 구성하였다. 배터리 모델링 및 양방향 DC-DC 컨버터용 제어기는 PSIM을 이용한 시뮬레이션을 통하여 검증하였으며, 그 타당성을 실험을 통하여 확인하였다.
수면의 질을 측정하기 위한 안대형 생체신호 측정기기 개발
안창선,임재관,정봉수,김영주,Changsun Ahn,Jaekwan Lim,Bongsu Jung,Youngjoo Kim 한국정보처리학회 2023 정보처리학회논문지. 컴퓨터 및 통신시스템 Vol.12 No.5
우리나라 3대 수면 질환으로는 코골이, 수면무호흡증, 불면증이 있다. 수면 부족은 만병의 근원이며 수면 부족으로 인한 질병은 심혈관계 질환, 인지장애, 비만, 당뇨, 대장염, 전립선암에 이르기까지 다양하게 나타난다. 수면 관리 중요성을 인식한 정부도 2018년 7월부터 수면다원검사를 국민건강보험 혜택을 적용해서 작은 부담으로 검사를 받아볼 수 있도록 하고 있다. 그럼에도 불구하고 불면증 환자는 시간적·공간적·경제적 부담감을 해소하고 일상생활 속에서 수면의 질을 관리할 필요가 있다. 이러한 문제를 해결하기 위해서 본 논문에서는 병원이 아닌 일상생활 속에서 수면관리에 활용할 수 있는 안대형 생체신호 측정기기를 개발하였다. 측정기기에서는 6개 생체신호(안구동작, 뒤척임, 체온, 산소포화도, 심박수, 오디오)를 측정할 수 있다. 사용되는 센서로는 안구동작, 뒤척임은 자이로스코프센서(MPU9250, InvenSense, 미국)가 사용되었다. 센서값 입력 범위는 258~460°/sec 단위로 조정되며, 입력 범위값 내에서 작동상태를 확인하였다. 체온, 산소포화도, 심박수는 센서(MAX30102, Analog Devices, 미국)를 사용하였다. 체온은 30~45℃ 작동상태를 확인했으며, 산소포화도 사용범위는 미사용상태는 0%이고 사용상태는 20~90%의 작동상태를 확인하였다. 심박수의 범위는 40~180 bpm에서 작동상태를 확인하였다. 오디오 신호는 센서(AMM2742-T-R, PUIaudio, 미국)를 통해서 생체신호를 측정하며 감도는 -42±1 dB이며 주파수 범위는 20~20 kHz에서의 작동상태를 확인하였다. 시스템 구성은 생체신호 측정기기와 데이터수집 장치로 PC 및 모바일 애플리케이션으로 구성되었다. 측정된 데이터는 모바일과 PC로 수집되며 수집된 데이터는 수면의 단계를 판단하고 수면 유도와 수면장애에 대한 사전 선별기능을 진행할 수 있는 기초자료로 사용될 수 있다. 앞으로 간편하게 가정에서 불면증 환자들에게 수면의 질을 측정할 수 있게 되어 불면증 환자들의 치료에 도움이 될 것으로 예상한다. The three major sleep disorders in Korea are snoring, sleep apnea, and insomnia. Lack of sleep is the root of all diseases. Some of the most serious potential problems associated with sleep deprivation are cardiovascular problems, cognitive impairment, obesity, diabetes, colitis, prostate cancer, etc. To solve these problems, the Korean government provided low-cost national health insurance benefits for polysomnography tests in July 2018. However, insomnia patients still have problems getting treated in terms of time, space, and economic perspectives. Therefore, it would be better for insomnia patients to be allowed to test at home. The measuring device can measure six biosignals (eye movement, tossing and turning, body temperature, oxygen saturation, heart rate, and audio). A gyroscope sensor (MPU9250, InvenSense, USA) was used for eye movement, tossing, and turning. The input range of the sensor was in 258°/sec to 460°/sec, and the data range was in the input range. Body temperature, oxygen saturation range, and heart rate were measured by a sensor (MAX30102, Analog Devices, USA). The body temperature was measured in 30 ℃ to 45 ℃, and the oxygen saturation range was 0% for the unused state and 20 % to 90 % for the used state. The heart rate measurement range was in 40 bpm to 180 bpm. The measurement of audio signal was performed by an audio sensor (AMM2742-T-R, PUIaudio, USA). The was -42 dB ±1 dB frequency range was 20 Hz to 20 kHz. The measured data was successfully received in wireless network conditions. The system configuration was consisted of a PC and a mobile app for bio-signal measurement and data collection. The measured data was collected by mobile phones and desktops. The data collected can be used as preliminary data to determine the stage of sleep and perform the screening function for sleep induction and sleep disturbances. In the future, this convenient sleep measurement device could be beneficial for treating insomnia.
수술 중 신경의 시각화를 위한 시분할 액정-편광 이미징 시스템 개발 및 타당성 검증
이우람(Woo Ram Lee),임창균(Changkyun Im),임재관(Jaekwan Lim),김준민(Jun-Min Kim) 한국정보기술학회 2020 한국정보기술학회논문지 Vol.18 No.5
Since thin or buried nerves are difficult to recognize with the naked eye, many cases have been reported leading to surgical side effects or complications. Therefore, in this paper, we propose a liquid crystal-polarized light imaging(LCPi) system with a simple structure that allows visualization of nerves during surgery. The LCPi system is designed to acquire polarization images of 0 and 90 degrees by time division and to identify the region having polarization characteristics through image processing. The validation of the system was accomplished by imaging around the sciatic nerve of the rat and visualizing nerves against the surrounding tissue. The LCPi system is expected to be used as an intraoperative nerve visualization system to minimize nerve damage after the optimization process.
벡터위상결합 방식을 이용한 8비트 360도 위상천이기 설계
서동호(Dong Ho Seo),이원준(Won Jun Lee),김용주(Young Joo Kim),조용훈(Yonghoon Cho),송종환(Jonghwan Song),송동주(Dongju Song),임재관(Jaekwan Lim),김상현(Sang Hyun Kim),박명윤(Myungyoon Park),한상민(Sang-Min Han) 한국통신학회 2021 한국통신학회 학술대회논문집 Vol.2021 No.2
본 논문은 45도 스텝으로 360도의 위상천이가 가능한 360도 위상천이기를 백터 위상 결합 방식을 이용하여 설계하였다. 제안된 위상천이기는 90도 하이브리드를 이용한 0도와 90도 위상차를 갖는 1단 회로와 지연성을 위상차를 갖는 2단 회로를 연결하여 0, 90, 180, 270도의 위상 천이를 갖는 위상천이기 설계하였으며, 2개의 위상천이기를 전력 합성하여 45도 스텝으로 8개 비트의 총 360도를 커버할 수 있는 위상천이 시스템을 설계, 제작하였다. 각 위상천이기는 백터 합의 이론에 따라 위상의 변화를 나타내었으며 설계한 이론지와 매우 근접한 결과를 얻을 수 있었다.