http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
초임계 유체를 이용한 광촉매용 나노크기의 결정질 $TiO_2$ 분말 제조
임대영,김종옥,김택남,이채현,박원규,Lim, Dae-Young,Kim, Jong-Ock,Kim, Taik-Nam,Lee, Chae-Hyun,Park, Won-Kyu 배재대학교 공학연구소 1998 공학논문집 Vol.3 No.1
습식화학법의 단점을 극복하는 이상적인 분말을 제조하기 위해서는 용질분자가 용액내에서 활발하게 움직여서 분자단위의 혼합이 가능하고 용매는 낮은 점도를 가져 용질분자의 움직임에 도움을 주어야 하며, 얻어진 분말도 결정질이어야 한다. 본 논문에서는 이러한 조건을 동시에 만족시키는 분말제조방법으로 물질의 임계온도, 임계압력을 넘어 응축된 가스상태로 존재하는 초임계 유체를 이용하여 분말을 제조하였다. 용매인 에탄올이 초임계 유체상태에서 분해될 때 생성된 물로 titanium(IV) ethoxide를 가수분해시켜 이용도가 높은 광촉매용 $TiO_2$ 분말을 제조하였다. In order to fabricate ideal powders, new processing is necessary in which the solute atoms in solution rapidly move to mix each other to the degree of molecular level, the viscosity of solution should be low not to effect the moving of solute atoms, and the powders could be directly obtained as crystalline. Supercritical fluid is defined as condensed gas state up to its critical pressure and temperature. In this paper, supercritical fluid methods were studied as a new ceramic processing of powder preparation. The crystalline anatase powders of $TiO_2$ which are useful for photocatalyst materials were fabricated by hydrolysis of titanium(IV) ethoxide using water which was ethanol as a supercritical fluid.
$BaTiO_3$ 분말합성조건 및 $CeAIO_3-BaTiO_3$계 유전체의 기초적 연구
임대영,김종옥,이채현,박원규,Lim, Dae-Young,Kim, Jong-Ock,Lee, Chae-hyun,Park, Won-Kyu 배재대학교 자연과학연구소 1995 自然科學論文集 Vol.8 No.1
It is hard to synthesize pure $BaTiO_3$ from $BaCO_3$ and $TiO_2$ in solid reaction for the activity of BaO and secondary phase. For this reason, the wet chemical techniques have been studied. Starting material which was used in these methods were expensive and the properties of powder which was synthesized in same defined. So, some process have been studying again to improve soild reaction method. This study which was one of those was to defin the forming mechanism of $Ba_2TiO_4$ and to control some condition of $Ba_2TiO_4$. The synthesis temperature of $BaTiO_3$ in solid reaction was near $1120^{\circ}C$. The quantity and forming temperature of $Ba_2TiO_4$ could be controlled by atmosphere heat treatment. $Ba_2TiO_4$ was related to expansion in Ba-rich region of $BaTiO_3$. $BaTiO_2O_5$ and $BaTiO_3O_7$ was reason to expand in Ti-rich region. The dielectrics of $CeAIO_3$ which was synthesized and sintered in reduction atmosphere and $BaTiO_3$ system were affected by $CeO_2$ which was formed for the decomposition of $CeAIO_3$ heat treatment in air. $BaTiO_3$는 일반적으로 $BaCO_3$와 $TiO_2$의 고상반응으로 얻어지는데 BaO의 활성이 높고 이차상이 생성되므로 순수하게 합성하기가 어렵다. 순수한 $BaTiO_3$를 얻기 위해서 공침법, 가수분해법등이 연구되고 있으나 출발 원료가 비싸고 제조 공정상 문제로 고상반응으로 합성한 것과 별차이가 없다. 그래서 고상반응의 공정을 개선하는 연구가 다시 진행되고 있으며 본 연구에서도 $BaTiO_3$를 고상반응으로 합성할 때 물성에 좋지 않은 영향을 주는 이차상인 $Ba_2TiO_4$의 생성기구를 밝히고, 그것을 조절하려 했다. $BaTiO_3$의 이론조성중 Ba가 과잉인 영역에서는 $Ba_2TiO_4$가 $TiO_2$가 과잉인 영역에서는 $BaTiO_2O_5$와 $BaTiO_3O_7$이 소지의 팽창에 원인이 되었다. 환원에서 소결되는 $CeAIO_3$와 $BaTiO_3$계의 유전체는 공기중에서 $CeAIO_3$가 분해되고 이때 생성되는 $CeO_2$가 $BaTiO_3$의 전기적 물성에 큰 영향을 주었다.
임대영,홍석형,정용진,박상준,조승범,Lim, Dae-Young,Hong, Seok-Hyoung,Jung, Yong-Jin,Park, Sang-Jun,Cho, Seung-Beom 배재대학교 공학연구소 2002 공학논문집 Vol.4 No.1
본 연구에서는 초임계 건조 및 유체법을 사용하여 얻어진 분말을 열처리하여 나노 크기의 알루미나 분말을 제조하였다. Al-isopropoxide를 출발 물질로 사용하였고, 용매로서는 2가 알코올류인 Ethylene glycol을 사용하였다. 또한 온도 및 압력의 영향을 조사하기 위하여 임계점 이하의 조건에서도 실험도 병행하였다. Autoclave에서 초임계 건조 및 유체법으로 제조된 알루미나는 XRD, SEM 및 TG-DTA 의해 특성을 조사하였고, 열처리 결과 새로운 route로 $\alpha-A12O3$로 전이 되었다. Nano-size Alumina powders were prepared by heat treatments which were products obtained using supercritical drying and fluid method. Al-isopropoxide dispersed in ethylene glycol as solvents were used as starting materials. The alumina powders were made by supercritical drying fluid method at Autoclave, those were characterize examined closely by XRD, SEM and TG-DTA. The powders were transformed $\alpha-A12O3$ in new route after heat treatment.
신경망을 이용한 자계기반 자율주행 시스템의 조향 제어기 설계
임대영(Dae-Young Lim),정영윤(Young-Yoon Jung),유영재(Young-Jae Ryoo) 한국지능시스템학회 2005 한국지능시스템학회 학술발표 논문집 Vol.15 No.2
본 논문에서 신경망을 이용한 자계기반 자율주행 시스템의 조향 제어기 설계를 제안한다. 자율주행시스템에서 가장 중요한 핵심요소는 자계도로상의 센서의 현재위치를 파악하고 주행하는 것이다. 먼저 자계도로상의 현재위치를 파악하기 위한 방법으로, 첫 번째 자기쌍극자 모델식이 센서에서 측정된 자계와 일치함을 보였다. 두 번째 Peak Mapping법을 이용하여 외란으로 작용하는 지자계 성분을 제거할 수 있음을 입증하였다. 세 번째로 신경망을 이용하여 높이 성분(BZ)가 변하더라도 정확한 거리가 계측됨을 확인하였다. 따라서 신경망을 이용하면 소량의 메모리를 사용할 수 있으므로 실제 시스템에서 경제적인 효과를 볼 수 있고, 정확한 거리를 계측하므로 경로를 이탈하지 않고 자율주행이 가능한 시스템을 설계하였다.
임대영(Lim Dae Young),유영재(Ryoo Young Jae),김의선(Kim Eui Sun),목재균(Mok Jai Kyun) 한국철도학회 2005 한국철도학회 학술발표대회논문집 Vol.- No.-
In this paper, an estimation system of vehicle position and orientation on magnetic lane, which is a parameter of the steering controller for automated lane follwing is described. To verify that the magnetic dipole model could be applied to a magnetic unit paved in roadway, the analysis of the the data 3-axis magnetic field measured experimentally.
임대영(Dae-Young Lim),윤기철(Ki-Chul Yoon),김길용(Kil-Young Kim) 한국정보과학회 2001 한국정보과학회 학술발표논문집 Vol.28 No.1A
플래쉬 메모리는 데이터 저장 및 변경이 가능한 비휘발성 메모리로 가벼운 무게, 낮은 전력 소모, 충격에 대한 저항성과 빠른 데이터 처리 능력 때문에 이동형 컴퓨터 시스템에서 사용하기에 적당하다. 그러나 플래쉬 메모리는 덮어쓰기(update-in-place)가 불가능하고 각 메모리 셀에 대해 초기화 작업(erasing operation)의 수가 제한되어 있다. 이러한 단점들을 고려하여 세그먼트의 데이터 중 유효 데이터의 비율과 hot 데이터(가까운 시간 안에 update가 될 것이라 예상되는 data)의 수, 세그먼트가 초기화되었던(erasing) 횟수 등을 고려한 새로운 초기화 기법(cleaning policy)을 제안하고자 한다.
자기저항센서를 이용한 페라이트와 네오디뮴 자석의 특성분석
임대영(Dae-Young Lim),유영재(Young-Jae Ryoo),김의선(Eui-Sun Kim),임영철(Young-Cheol Lim),목재균(Jai-Kyun Mok),장세기(Se-Ky Chang) 한국지능시스템학회 2004 한국지능시스템학회 학술발표 논문집 Vol.14 No.2
본 논문에서는 자기저항 센서를 이용하여 자율주행 시스템에서 필요로 하는 자석의 종류에 따른 자계의 특성을 분석하였다. 분석결과 거리에 따라 자계의 특성이 변화하고, 자석에 근접할수록 자계의 변화가 급격하게 나타난다. 센서가 자석에서 멀어질 수록 지자계의 값에 가까워진다. 또한 페라이트자석 보다 네오디뮴 자석의 자계특성이 우수함을 보였다.
임대영(Dae-Young Lim),유영재(Young-Jae Ryoo) 한국지능시스템학회 2004 한국지능시스템학회 학술발표 논문집 Vol.14 No.1
This paper describes an intelligent diagnostic system for the refrigerator which is used for the cold-storage of farm produce. The propose method measures the temperature of the compressor, condenser and evaporator in the refrigerator and uses the measured values to diagnose the system. It is shown through the implementation that the developed system is efficient for the fault observation and diagnose of the refrigerator.
자기저항센서를 이용한 자계기반 자율주행 시스템의 특성분석
임대영(Dae-Young Lim),유영재(Young-Jae Ryoo),이진(Jin Lee) 한국지능시스템학회 2005 한국지능시스템학회 학술발표 논문집 Vol.15 No.1
본 논문에서는 자기저항 센서를 이용한 자계기반 자율주행 시스템의 자계특성을 분석한다. 자율주행 시스템에서 가장 중요한 핵심기술은 자기원으로 구성된 도로를 주행하는 차량의 현재위치 파악이다. 따라서 자계 도로위의 차량의 현재위치를 검출하기 위한 시스템의 선행조건으로 센서와 자기원 사이에 존재하는 자계의 특성을 분석하기 위한 실험 장치를 설계하고 구성하였다. 그리고 자기원의 설치간격 및 기울기에 따른 자계의 3축성분과 데이터를 획득한다. 획득한 데이터를 이용하여 3축성분에 따른 거리정보와 방향에 따른 자계의 변화를 분석한다.