http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Burow`s Graft를 이용한 안와 주위의 결손 복원 4예
박성현 ( Seong Hyun Park ),이승용 ( Seung Yong Lee ),이지현 ( Ji Hyun Yi ),홍진석 ( Jin Seok Hong ),윤석권 ( Seok Kweon Yun ),김한욱 ( Han Uk Kim ),임철완 ( Chull Wan Ihm ) 대한피부과학회 2006 대한피부과학회지 Vol.44 No.8
The skin defects made from excision of malignant skin tumors can usually be reconstructed by secondary intention, primary closure, a local flap or skin graft. When reconstructing any skin defect, we must consider the defect site and size, reconstruction method, blood supply, wrinkling, relaxed skin tension line, donor site, patient`s age, general health status, maintenance of function and cosmetic aspect. Reconstruction of the periorbital area is challenging to the dermatologist owing to the complex function of the eye, relative lack of adjacent loose tissue, free anatomic margin, and the need to maintain symmetry with the contralateral eye. The Burow`s graft is a useful technique for periorbital wound reconstruction, using a full-thickness skin graft where the donor site is the skin adjacent to the wound. The use of adjacent skin as a graft gives a better color, texture, and thickness match than traditional donor sites. It also provides a simple method for reconstruction of wounds, compared to those repaired by a tight primary closure or local flap which may have excessive tension on sutures and distortion of nearby structures. (Korean J Dermatol 2006;44(8):966~969)
황색계 천연염재와 쪽 염료의 복합염색시 염색순서와 매염제 종류에 따른 견직물의 색채특성
이지연(Lee, Jiyeun),김동은(Kim, Dongeun),이승용(Yi, Sengyoung),이승주(Lee, Seungju),이주원(Lee, Juwon),정수진(Jeong, Sujin),최종명(Choi, Jongmyoung) 충북대학교 생활과학연구소 2019 생활과학연구논총 Vol.23 No.1
This study was conducted to find green color diversity through combination dyeing of natural dyestuffs. Silk fabrics were dyed in combination with good fastness of natural indigo and yellowish natural dyes. Following combination dyeing, three kinds of mordants were treated. The color characteristics of silk fabrics with combination dyeing were measured. The greens of silk fabrics displayed slight differences according to the combination dyeing sequence. It was found that dyeing with indigo followed by yellow resulted in good green color ( GY, G, BG ). The green represented by the concentration of indigo (niram) showed a slight difference. Green colors ( GY, G, BG ) were more strongly expressed when the concentration of indigo was 5-10 g/l. The green color of combination dyed fabrics showed a slight difference according to the kind of yellowish natural dyestuffs used. The use of turmeric and Amur cork tree was more effective than the Japanese pagoda tree after dyeing with indigo first. When dyeing with indigo followed by a yellowish dye, color characteristics were different according to the type of mordant. Additionally, the color characteristics of silk fabrics treated with mordants were not significantly changed compared to fabrics not treated with mordant for dyeing with Japanese pagoda tree and turmeric. However, the color characteristics of silk fabrics dyed with Amur cork tree were slightly changed.
석탄가스화기, F-T 공정, 건식탈황공정이 통합된 0.3 배럴/일 규모 석탄액화(CTL) 공정에서 고온, 고압 연속운전에서 아연계 탈황제의 탈황 성능 파악
박영철(Park, Young Cheol),조성호(Jo, Sung-Ho),진경태(Jin, Gyoung Tae),이승용(Lee, Seung-Yong),이창근(Yi, Chang-Keun) 한국신재생에너지학회 2010 한국신재생에너지학회 학술대회논문집 Vol.2010 No.06
고온건식탈황기술은 고온고압에서 석탄가스에 함유된 황화합물을 제거하는 기술로 석탄가스화에 의해 생성된 고온의 석탄가스의 열손실을 최소화하여 열효율이 높은 기술이다. 본 연구에서는 석탄으로부터 합성원유를 생산하는 0.3 배럴/일 규모 석탄액화(CTL)공정의 연계운전을 통하여 건식탈황공정의 성능을 평가하였다. 0.3 배럴/일 규모 석탄액화공정은 석탄가스화기, 건식탈황공정, 액화공정으로 구성되어 있으며 30 atm의 고압에서 운전된다. 건식탈황공정은 석탄가스화기와 액화공정 사이에 위치하여 석탄가스화로부터 생성된 석탄가스에 함유된 황화합물을 아연계 건식탈황제에 의해 제거한 후 액화반응기로 공급하여 황화합물에 의한 촉매의 피독을 막아주는 역할을 수행한다. 본 연구에서는 기존에 개발된 두 개의 기포유동층 반응기로 구성된 탈황장치를 30 atm에서 운전이 가능하도록 수정/보완하여 실제 운전압력인 30 atm의 고압에서 연속운전을 수행하였다. 실험 결과 탈황효율은 99% 이상이며 탈황반응기 출구 황화합물의 농도는 1 ppmv 이하로 유지하였다.
석탄가스에 함유된 H₂O/H₂S 농도가 유동층반응기에서 아연계건식탈황제의 성능에 미치는 영향
박영철(Park, Young-Cheol),조성호(Jo, ung-Ho),진경태(Jin, Gyoung-Tae),이승용(Lee, Seung-Yong),이창근(Yi, Chang-Keun) 한국신재생에너지학회 2009 한국신재생에너지학회 학술대회논문집 Vol.2009 No.06
본 연구에서는 석탄가스에 함유된 H₂O/H₂S 농도변화에 따른 세가지 종류의 아연계 탈황제의 반응성능을 회분식 유동층반응기에서 분석하였다. 가스화에서 생성되는 가스의 조성은 모사가스를 이용하여 입구의 H₂O와 H₂S 농도를 변화시켜 실험을 수행하였다. H₂O의 농도는 5%부터 30%까지 H₂S의 농도는 0.5%에서 2%로 변화시켜 탈황성능을 분석하였다. 실험 결과 H₂O의 농도가 증가할수록 탈황성능이 감소하였다. 입구의 H₂S 농도가 증가할수록 탈황반응기 후단의 H₂S 농도 역시 증가하였으나, 탈황성능은 최저 99.5%로 건식탈황제를 이용하여 99% 이상의 H₂S 제거 성능을 보이는 것을 확인하였다.
벤치급 CO<sub>2</sub> 포집공정에서 흡수반응기의 내부구조에 따른 K-계열 고체흡수제의 성능평가
김재영 ( Jae-young Kim ),임호 ( Ho Lim ),우제민 ( Je Min Woo ),조성호 ( Sung-ho Jo ),문종호 ( Jong-ho Moon ),이승용 ( Seung-yong Lee ),이효진 ( Hyojin Lee ),이창근 ( Chang-keun Yi ),이종섭 ( Jong-seop Lee ),민병무 ( Byoung-moo Mi 한국화학공학회 2017 Korean Chemical Engineering Research(HWAHAK KONGHA Vol.55 No.3
본 연구에서는 벤치급 건식 CO<sub>2</sub> 포집 성능평가 장치에서 흡수반응기 내부의 구조와 형태에 따른 K-계열 흡수제(KEP-CO2P2, 한국전력공사 전력연구원)의 성능특성을 확인하였다. 흡수반응기 혼합영역(mixing-zone)에 구조와 형태가 다르게 제작된 두 종류의 열교환기가 적용되었으며, 각각 CASE 1과 CASE 2로 나뉘어 동일한 조업조건으로 연속운전을 수행하였다. 연속운전동안 흡수반응 온도는 75~80 ℃, 재생반응 온도는 190~200 ℃, 그리고 반응기체(CO<sub>2</sub>) 농도는 12~14 vol%으로 설정하였다. 특히 흡수제의 흡수능 비교를 위해 흡수반응기 혼합영역의 차압을 400~500 mmH<sub>2</sub>O로 유지하며 운전하였다. 또한 반응 후 채집한 시료는 반응성 비교를 위해 TGA를 이용하여 물성분석을 하였다. CASE 1 실험에서 CO<sub>2</sub> 제거효율과 동적흡수능은 각각 64.3%, 2.40 wt%으로 산출 되었고, CASE 2 실험에서 CO<sub>2</sub> 제거효율과 동적흡수능은 각각 81.0%, 4.66 wt%으로 산출되었다. 또한 반응 후 흡수제에 대한 TGA 측정 결과의 무게감량을 이용하여 흡수제의 동적흡수능을 계산한 결과, CASE 1과 CASE 2 실험에서 반응 후 흡수제의 동적흡수능은 각각 2.51 wt%와 4.89 wt%으로 산출되었다. 결론적으로 동일한 조업조건에서 흡수반응기 내부에 삽입되는 열교환기의 구조와 형태에 따라 흡수제의 성능 차이가 있는 것을 확인하였다. In this study, the performance characteristics of the K-based sorbents (KEP-CO2P2, KEPCO RI, Korea) has been studied in relation with the heat exchanger structure and shape in a mixing zone of the carbonator in the benchscale dry CO<sub>2</sub> capture process. Two types of heat exchangers (different structure and shape) were used in the carbonator as CASE 1 and CASE 2, in which the experiment has been continuously performed under the same operating conditions. During the continuous operation, working temperature of carbonator was 75 to 80 ℃, that of regenerator was 190 to 200 ℃, and CO<sub>2</sub> inlet concentration of the feed gas was 12 to 14 vol%. Especially, to compare the dynamic sorption capacity of sorbents, the differential pressure of the mixing zone in the carbonator was maintained around 400 to 500 mm H<sub>2</sub>O. Also, solid samples from the carbonator and the regenerator were collected and weight variation of those samples was evaluated by TGA. The CO<sub>2</sub> removal efficiency and the dynamic sorption capacity were 64.3% and 2.40 wt%, respectively for CASE 1 while they were 81.0% and 4.66 wt%, respectively for CASE 2. Also, the dynamic sorption capacity of the sorbent in CASE 1 and CASE 2 was 2.51 wt% and 4.89 wt%, respectively, based on the weight loss of the TGA measurement results. Therefore, It was concluded that there could be a difference in the performance characteristics of the same sorbents according to the structure and type of heat exchanger inserted in the carbonator under the same operating conditions.
Potassium계열 흡수제를 이용한 50 Nm³/h급 연소 후 건식 CO₂ 포집 공정: 재생 조건 최적화
원유섭(Yooseob Won),김재영(Jae-Young Kim),박영철(Young Cheol Park),이창근(Chang-Keun Yi),남형석(Hyungseok Nam),우제민(Je-Min Woo),진경태(Gyoung-Tae Jin),박재현(Jaehyeon Park),이승용(Seung-Yong Lee),조성호(Sung-Ho Jo),신명식(Myung-Sik 한국에너지기후변화학회 2020 한국에너지기후변화학회 학술대회 Vol.2020 No.11
순환유동층 형태의 건식 이산화탄소 포집 장치에서 saturation carrying capacity를 고려한 최적 설계 방법
원유섭(Yooseob Won),김재영(Jae-Young Kim),남형석(Hyungseok Nam),박영철(Young Cheol Park),이유리(Yu-ri Lee),박재현(Jaehyeon Park),이승용(Seung-Yong Lee),진경태(Gyoung-Tae Jin),이창근(Chang-Keun Yi),조성호(Sung-Ho Jo),최우성(Woosung Ch 한국에너지기후변화학회 2021 한국에너지기후변화학회 학술대회 Vol.2021 No.11
탄소 중립의 성공만이 온난화 현상을 가속화시키는 이산화탄소의 배출을 원천적으로 차단하고, 지구 온도상승을 억제하여, 세계적인 생태계 균형을 유지하게 한다. 연소 후 포집 기술은 연소 전 또는 순산소 연소와 같은 기술보다 적용이 쉽고, 대규모 이산화탄소 배출 오염원의 이산화탄소 배출을 감소시킨다. 아민계 용액을 이용한 연소 후 이산화탄소 포집 기술이 벤치마크 기술로 평가된다. 하지만, 장치 부식, 용액의 성능감소 등의 문제들이 해결되지 못하였고, 이러한 문제들을 회피할 수 있도록 건식 아민계 흡수제가 개발되고 있다. 본 연구는 아민계 건식 이산화탄소 흡수제의 성능을 평가하고, 고속 유동층인 흡수탑의 최적 설계 방안을 saturation carrying capacity를 고려하여 제시하는 것을 목적으로 수행되었다. 흡수제 성능은 다소 낮게 평가되었지만, 아민계 흡수제를 적용할 경우 최적 설계값을 확인하였다(Superficial gas velocity=1.56 m/s, sorbent flux=6.5 kg/㎡s).