http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
고령운전자 인지기능검사 점수에 따른 교육용 시뮬레이터 수행 역량 비교
이세현 ( Lee Se-hyeon ) 한국도로교통공단 2016 교통안전연구 Vol.35 No.-
고령운전자 인지기능검사를 이용한 효과적 활용 방안을 마련하고자, 모의주행 상황인 교육용 시뮬레이터를 이용하여 인지기능검사 점수에 따른 고령운전자의 운전 능력을 알아보고자 하였다. 연구 결과, 인지기능검사 전체 점수가 낮을수록 조심운전 행동이 지나치게 높아지는 경향성이 나타났다. 그러나 인지기능검사 점수가 시뮬레이터의 사고 및 위험운전 행동에 대한 영향은 유의미하진 않았다. 따라서 지나친 조심운전이 교통상의 문제와 사고 위험성을 높인다는 이전 연구들을 고려하였을 때, 고령운전자 교통안전교육 시 도로교통법과 법규 준수와 관련된 안내와 더불어 인지기능검사 점수가 낮은 교육생들에게는 저속 운행과 같은 지나친 조심 운전 행동이 교통사고의 위험성을 높일 수 있다는 점을 상기시키고, 고령운전자가 복잡한 도로 상황이나 낯선 장소에서의 운전을 자제시킬 필요성이 있겠다. In order to make effective using plan of the elderly driver 's cognitive function test, the purpose of this study is to investigate the driving ability of elderly drivers according to the cognitive function test using performed driving simulator. As a result of the study, Elderly drivers who showed the lower total scores of cognitive function test had similar tendency that their driving behaviors became too careful. However, the cognitive function test scores was not so relevant on the accident and dangerous driving behaviors of the performed driving simulator. Therefore, considering previous studies that excessive careful driving increases the risk of traffic problems and accidents, we should make elderly drivers know the guidance on road traffic laws and regulations while they take traffic safety education. In addition that it is important to remind elderly drivers with low cognitive function test scores that too careful driving behaviors increase the risk of traffic accidents. And there is a need for elderly drivers not to drive on the complicated road conditions or unfamiliar places.
마이크로웨이브 화학증착법에 의한 다이아몬드 박막의 미세구조오 미세결함
이세현,이유기,박종완,Lee, Se-Hyeon,Lee, Yu-Gi,Park, Jong-Wan 한국재료학회 1996 한국재료학회지 Vol.6 No.8
MPECVD법을 이용하여 다이아몬드 박막을 p형 Si(100)기판 위에 증착하였다. 증착하기에 앞서, 핵생성 밀도를 향상시키기 위하여 40-$60\mu$m 크기의 다이아몬드 분말을 사용하여 6분간 초음파 전처리를 행하였다. 이런 전처리 과정 후, 다이아몬드 박막을 $^900{\circ}C$, 40Torr, 1000W microwave power에서 ${CH}_{4}$와 ${H}_{2}$사용하여 증착하였다. 이렇게 형성된 다이아몬드 박막의 순수도는 Raman spectroscopy로 측정하였으며 박막의 표면은 SEM으로 , 그리고 미세구조와 미세결함은 TEM으로 조사하였다. 반응기체 중 CH4의 농도가 증가함에 따라 다이아몬드의 정형적인 Raman peak와 더불어 다이아몬드가 아닌 제 2상의 peak가 증가하였다. SEM에 의한 박막의 표면은 ${CH}_{4}$가 증가함에 따라 박막의 표면이 뚜렷한 결정형상에서 cauliflower 형태로 변화하였다. 다이아몬드 박막의 결함밀도는 ${CH}_{4}$농도가 증가함에 따라 증가하였으며 결함 중 대부분은 {111}twin이였다. 그리고 MTP(Mulitply Twinned Particle)는 5개의 (111)면으로 형성된 결정으로, 5개의 (111)면은 각각에 대해서 Twin되어 있으며 five-fold symmetry를 나타내었다. 계면에서는 다이아몬드내의 결함들이 핵생성 site를 함유한 작은 지역에서부터 V형재로 퍼져 나갔다. Diamond thin films were deposited on p-type (100) Si wafers using MPECVD. Prior to deposition, ultrasonic striking was done to improve density of nucleation sites with dimond powder of 40~$60\mu$m size. Then diamond thin films were deposited at $^900{\circ}C$, 40Torr and 1000W microwave power using ${CH}_{4}$ and ${H}_{2}$ gases. The purity, the morphology and the microstructur'e and microdefects of diamond thin films were characterized by Raman spectroscopy, SEM and TEM, repectively. In Raman spectroscopy the peaks of non-diamond phase increased as ${CH}_{4}$, concentration increased. In SEM, the morphology of diamond thin films varied from crystalline to cauliflower as ${CH}_{4}$, concentration increased. As ${CH}_{4}$ con centration increased, the density of defects increased, with most defects being {III} twin. ${MTP}_{5}$, were formed with five (II]) planes. As these (Ill) Planes were twinned, ${MTP}_{5}$, represented five-fold symmetry. ]n the interfaces, defects in diamond thin films fanned out from small regions implying nucleation sites.
MPECVD 다이아몬드 박막의 표면 형상에 미치는 증착조건의 영향
최지환,이세현,이유기,박정일,이은아,박광자,박종완,Choe, Ji-Hwan,Lee, Se-Hyeon,Lee, Yu-Gi,Park, Jeong-Il,Lee, Eun-A,Park, Gwang-Ja,Park, Jong-Wan 한국재료학회 1997 한국재료학회지 Vol.7 No.5
다이아몬드 형성에 미치는 MPECVD 증착조건에 관하여 연구하였다. 증착 실험 기판은 Si p-type (100)wafer를 사용하였으며 다이아몬드 박막은 다음과 같은 조건하에서 증착되었다. 메탄 농도:0.75%(3scm)-3%(12scm),산소 농도:0%-0.5%(2scm), 반응 압력:20torr-80torr, 반응 온도:$600^{\circ}C$-90$0^{\circ}C$. 낮은 증착온도($600^{\circ}C$)에서는 (100)의 우선성장면을 보였고 온도가 증가함에 따라 (100)과 (111)이 혼재된 cubo-octahedron이 형성되었고 90$0^{\circ}C$에서는 (111)의 우선성장면을 가징 octahedron이 형성되었다. 산소가 첨가됨에 따라 높은 메탄농도에서도 양질의 다이아몬드가 형성되었다. 낮은 압력하(200torr)에서는 비정질탄소가, 높은 압력하(80torr)에서는 양질의 다이아몬드가 형성되었다.
1차 동저항 패턴의 통계적 분석에 의한 저항 점 용접의 용접 품질 예측에 관한 연구
조용준,이세현,Jo, Yong-Jun,Lee, Se-Hyeon 대한기계학회 2000 大韓機械學會論文集A Vol.24 No.10
In previous studies, the dynamic resistance, which was calculated by the process variables measured at the electrode of the welding machine, and the electrode displacement were used for quality exa mination. However, in-process usage of such systems is not effective in systems that include a welding gun attached to a robot. In order to overcome such problems, we obtained and used the process variables from the welding machine timer. This would allow us to estimate real time in -process weld quality. For quality estimation, the features were extracted as factors from the primary dynamic resistance patterns, which were measured in t he welding machine timer. The relationship between the indexes and nugget size of the welds was observed through the regression analysis. Using the analyzed factors, a regression model that could estimate nugget diameter was developed. Two regression equations of the model were suggested depending on the factors, and it was showed that the model developed by stepwise method was effective one for weld quality estimation. The developed estimation model was in good linearity with the nugget diameter obtained through the experimentation.