http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
이성근,이광철,이승섭,Lee, Sung-Keun,Lee, Kwang-Cheol,Lee, Seung-S. 대한기계학회 2002 大韓機械學會論文集A Vol.26 No.11
Microlenses and microlens arrays are fabricated using a novel fabrication technology based on the exposure of a resist (usually PMMA) to deep X-rays and subsequent thermal treatment. The fabrication technology is very simple and produces microlenses and microlens arrays with good surface roughness (less than 1 nm). The molecular weight and glass transition temperature of PMMA is reduced when it is irradiated with deep X-rays. The microlenses is produced through the effects of volume change, surface tension, and reflow during thermal treatment of irradiated PMMA. The geometry of the microlens is determined by parameters such as the X-ray dose applied to the PMMA, the diameter of the microlens, along with the heating temperature, heating time, and cooling rate in the thermal treatment. Microlenses are produced with diameters ranging from 30 to 1500 ${\mu}{\textrm}{m}$. The modified LIGA process is used not only to construct hemispherical microlenses but also structures that are rectangular-shaped, star-shaped, etc.
에너지 효율적인 이더넷에서 개선된 LPI 제어 메커니즘
이성근,장용재,유남현,Lee, Sung-Keun,Jang, Yong-Jae,Yoo, Nam-Hyun 한국전자통신학회 2012 한국전자통신학회 논문지 Vol.7 No.5
IEEE 802.3az LPI 메커니즘은 전송할 데이터가 없을 경우 취침 모드로 천이하여 다수의 컴포넌트들을 저전력 상태를 유지하게 함으로써 에너지 효율성을 향상시킨다. LPI는 소량의 데이터가 주기적으로 전송되는 상황에서는 잦은 전송 모드 변환에 따른 오버헤드 때문에 에너지 효율이 크게 개선되지 못하는 문제점이 있다. 본 논문에서는 전송계층 트래픽 특성 및 네트워크 상태에 따라 LPI 모드 상태 천이를 적응적으로 수행하는 개선된 LPI 메커니즘을 제안한다. 시뮬레이션 방법에 의한 성능 분석을 통해 제안한 메커니즘이 다양한 트래픽 부하에 대해서 기존 방법보다 에너지 효율성을 향상시키는 것으로 나타났다. IEEE 802.3az LPI mechanism allows an Ethernet link to reduce power consumption by entering a low-power sleeping mode and letting some components being powered off when there is no data to be transmitted through the link. However, if small amount of packets are being sent periodically, such a mechanism can not obtain energy efficiency due to a high overhead caused by excessive mode transitions. In this paper, we propose an enhanced LPI mechanism which can perform state transition adaptively based on the traffic characteristics on transport layer and network status. This simulation result shows that proposed mechanism improves energy efficiency than LPI mechanism with respect to energy consumption rate for various traffic loads.
이성근(Sung-Keun Lee),박영신(Young-Shin Park),백남열(Nam-yul Baek),이의찬(Eui-Chan Lee),김연찬(Youn-Chan Kim),김준용(Joon-Yong Kim) 대한전기학회 2021 대한전기학회 학술대회 논문집 Vol.2021 No.7
전국적으로 (택지)개발사업이 송전선로 지중화사업과 병행되어 추진되고 있다. 이에 따라 지중화사업 진행 시 필수적으로 설치되는 케이블헤드의 규모가 크고 미관을 저해하여 지역주민들의 설비에 대한 반감이 날로 증가하고 있다. 이에 지역주민들의 거부감을 해소하고, 주민의 수용성을 제고하기 위해 환경 친화적이고 주위 경관과 조화를 이룰 수 있는 新개념옥내 케이블헤드 모델을 개발하고자 한다.
TMO 모델을 지원하는 MicroC/OS-Ⅱ상의 RMMC 구조의 설계
이성근(Sung Keun Lee),허신(Shin Heu) 한국정보과학회 2008 한국정보과학회 학술발표논문집 Vol.35 No.1
최근에는 임베디드 시스템의 규모가 점차 커지고, 시스템이 노드단위로 분산되어 협업을 통한 작업을 하는 경향이 많아져, 시스템 디자인에 객체지향적인 패러다임이 필요하게 되었다. TMO 모델은 90년대 초반부터 U.C Irvine의 Kane.Kim 등에 의해 연구되고 있는 실시간 객체모델이다. TMO 모델은 SvM과 SpM의 두가지 메소드 타입으로 실시간 클럭에 의한 수행이나, 이벤트 발생에 의한 메소드 수행을 지원함으로써 분산 실시간 시스템의 설계를 용이하게 해준다. 본 논문에서는 TMO 모델에서의 향상된 채널 기반의 객체 간 통신 구조인 RMMC를 MicroC/OS-Ⅱ에 맞게 적용하는 것에 대해 제안하고자 한다.
하악골 비대칭 환자의 양측성 하악골 시상분할 골절단술 후 하악과두의 위치 변화
이성근(Sung-Keun Lee),김경욱(Kyung-Wook Kim),김철환(Chul-Hwan Kim) 대한구강악안면외과학회 2004 대한구강악안면외과학회지 Vol.30 No.5
Purpose: After the surgical correction with sagittal split ramus osteotomy, the position of the mandibular condyle in the glenoid fossa and the proximal segment of the mandible change because of bony gap between proximal and distal segment, especially in case of mandibular setback asymmetrically. In this study, positional changes in the condyle and proximal segment after BSSRO were estimated in the mandibular asymmetry patient by analyzing the in submentovertex view and P-A cephalogram for identification of ideal condylar position during surgery. Patients and Methods: The 20 patients were selected randomly who visit Dankook Dental Hospital for mandibular asymmetry. Bilateral sagittal split ramus osteotomy with rigid fixation was performed and P-A cephalogram and submentovertex view was taken at the time of preoperative, immediate postoperative, 3 month postoperative period. Results: Intercondylar length and transverse condylar angle was increased due to inward rotation of proximal segment and anteromedial rotation of lateral pole of condyle head. The condylar position had a tendency to return to the preoperative state and after 3 months return up to about half of the immediate post-operative changes, and all the results showed more changes in asymmetry patient and deviated part of the mandible. Conclusion: Based on all these results above, surgeon should make efforts to have a precise preoperative analysis and to have a ideal condylar position during rigid fixation after BSSRO.
이성근(Sung Keun Lee) 대한지질학회 2021 대한지질학회 학술대회 Vol.2021 No.10
원자핵은 고유의 스핀을 가지고 있으며, 원자핵스핀이 주변의 핵스핀 및 전자와 어떻게 상호작용하는지에 대한 정보로부터 지구물질의 자세한 원자구조를 규명할 수 있습니다. 이러한 원자핵스핀 상호작용은 핵자기 공명(nuclear magnetic resonance) 과정의 구조변수로 정량화할 수 있습니다. 이러한 구조 변수들 중에 특히 원자핵스핀 주변의 전자배열을 설명하는 화학적차폐 텐서, 그리고, 원자핵의 사중극자모멘트와 전자장 그래디언트의 상호관계로부터 격자의 변형의 정도를 설명할 수 있는 사중극자상호 상수들의 압력에 따른 변화를 정립하여, 현재까지 잘 알려지지 않은 지구/행성 내부의 극한 환경 하에서의 비정질 지구물질의 구조 변화를 규명할 수 있습니다. 이러한 중요성에도 불구하고, 지구내부에서의 비정질 산화물의 원자핵스핀의 자세한 상호작용은 백만기압이상의 극한고압환경에서 보고된 바가 없습니다. 본 연구에서는 양자계산에 바탕을 둔 핵자기 공명 분광분석(NMR)을 이용하여 백만기압 이상의 극한 압력에서 비정질 MgSiO₃ 용융체의 Mg, Si 및 O 주위의 자세한 원자구조의 변화를 규명하였습니다. 비정질 용융체의 양이온들의 연결도와 배위수의 증가가 백만기압이상의 압력에서도 점이적으로 증가합니다. 더하여, Si-O 결합 길이의 비선형 변화, Mg-O 거리의 체계적인 감소, 압력에 따른 Si-O-Si 결합 각도의 감소는 사중극자 상호계수와 화학적 차폐의 비선형 변화를 초래합니다(1). 이러한 변화를 기반으로 행성 내부의 비정질 MgSiO₃ 내의 O-17, Mg-25, Si-29의 원자구조와 NMR 매개변수 사이의 관계를 최초로 확립했습니다. 더하여, 압력 증가에 따른 NMR 변수들의 분산이 증가로 부터 극한 압축 하에 비정질 산화물 위상 엔트로피는 증가하는 경향이 있습니다. 이는 하부 맨틀의 고밀도 비정질 용융체의 점성도가 급격히 감소하는 것을 지시합니다. 본 연구는 향후 다양한 복잡한 자연계 비정질 용융체의 메가바 압력 이상 하의 원자구조와 핵 스핀 상호작용을 연결하는 토대를 제공할 것으로 예상하며, 이로부터 마그마바다의 진화 연구의 새로운 창을 열 수 있을 것으로 기대합니다.