http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
활용(exploitation)과 탐색(exploration)이 경영성과에 미치는 영향: K마크 등 제품임의인증을 중심으로
이도명 기술경영경제학회 2009 Journal of Technology Innovation Vol.17 No.S
본 연구는 227개의 국내 중소기업들을 대상으로 기업의 활용적(exploratory) 혁신활동 및 탐색적(exploitative) 혁신활동이 경영성과에 미치는 영향을 분석하였고, 이러한 영향이 혁신형 기업의 경우에는 어떻게 달라지는지 또한 기술환경 및 소비자환경에 따라 어떻게 달라지는지를 분석하였다.최근에 새로운 역량을 개발하는 탐색과 기존 역량을 바탕으로 하는 활용이 적절한 균형을 이루는 것이 매우 중요해졌다. 두 가지 유형의 혁신활동이 경영성과에 어떠한 영향을 미칠 것이라는 본 연구의 핵심질문은 대부분의 기업이 당면하고 있는 상충적인 전략적 요구에 대한 인식에서 비롯되었다.실증연구 결과, 활용적 혁신활동과 탐색적 혁신활동은 모두 경영성과에 정의 영향을 미치고 있었다. 기술혁신성과인 K마크인증, 신제품(NEP)인증 등 제품임의인증을 취득한 혁신형 기업의 경우 탐색적 혁신활동은 재무적 성과에 정의 영향을 미치고 있는 반면, 활용적 혁신활동은 재무적 성과에 유의한 영향을 미치고 있지 않는 것으로 나타났다. 한편 기술환경 및 소비자환경과 같은 환경요인들은 두 가지 유형의 혁신활동과 경영성과의 관계에 영향을 미치지 않는 것으로 나타났다.
활용적 혁신활동과 탐색적 혁신활동의 영향요인과 혁신성과 및 인지적 기업성과에 미치는 영향에 관한 연구
이도명(Do-Myung Lee),임성준(Seong-Joon Limb) 한국전략경영학회 2012 전략경영연구 Vol.15 No.1
본 연구는 227개의 국내 중소기업기업들을 대상으로 최고경영자의 특성, 경쟁전략, 조직구조의 분권화와 기업의 활용적 혁신활동 및 탐색적 혁신활동 사이의 관계를 실증적으로 분석하고, 두 가지 유형의 혁신활동이 기업의 기술혁신성과와 경영성과에 미치는 영향을 실증적으로 분석하였다. 실증연구 결과, 최고경영자의 혁신적 경영스타일, 차별화전략, 분권화 수준은 탐색적 혁신활동에 정의 영향을 미치고 있는 반면, 활용적 혁신활동에는 원가우위 전략이 정의 영향을 미치고 있으며, 분권화 수준은 활용적 혁신활동에 부의 영향을 미치고 있는 것으로 나타났다. 또한 탐색적 혁신활동은 신제품(NEP)인증으로 측정된 새로운 분야에서의 기술혁신성과 창출에 기여하고 있는 것으로 나타났다. 이에 비해, 기존 영역에서의 활용적 혁신활동은 K마크 등 제품임의인증으로 측정된 중소기업의 기술혁신성과에 유의한 영향을 미치지 못하고 있는 것으로 나타났다. 한편, 활용적 혁신활동과 탐색적 혁신활동은 모두 인지된 경영성과에는 정의 영향을 미치는 것으로 나타났다. This research conducts empirical analyses on the determinants of firm's exploitative and exploratory innovation activities and their effects on innovation output and perceived performance over a sample of 227 Korean small and midium-sized enterprises. Empirical results suggest that CEO's innovative management style, differentiation strategy, and decentralization level have positive relationships with firm's exploratory innovation activities. On the other hand, firm's exploitative innovation activities have positive relationships with cost-leadership strategy and have negative relationships with decentralization level. It is also found that a firm's exploratory innovation activities increase the firm's chance of having NEP certification, but contrary to the hypothesis, a firm's exploitative innovation activities do not have significant relationships with the firm's chance of having K-mark certification. However, it is found that a firm's exploitative innovation activities and exploratory innovation activities both have positive influence on the firm's perceived performance.
사출성형과정의 잔류응력을 고려한 표준인장시편의 선형구조해석
이도명(D. M. Lee),한병기(B. K. Han),이성희(Sunghee Lee) 한국정밀공학회 2006 한국정밀공학회 학술발표대회 논문집 Vol.2006 No.5월
In this study, an injection mold of tensile test specimen was manufactured by international standard. Pressure and temperature in the cavity of the injection mold was measured by sensors. Simulation of injection molding process was performed with the same condition of experiment and linear structural tensile analysis was also performed with the initial condition of the residual stress induced by injection molding analysis. Normalized elastic coefficient of tensile test was compared with that of structural analysis. It was shown that the residual stress induced by injection molding has an effect on both the experiment of tensile test and linear structural analysis.
캐비티 압력 및 온도 측정용 인장시편의 사출금형설계 및 제작
이도명(D. M. Lee),한병기(B. K. Han),이옥성(O. S. Lee),이성희(Sunghee Lee) 대한기계학회 2005 대한기계학회 춘추학술대회 Vol.2005 No.5
In the present study, design and manufacturing of plastic injection mold with cavity pressure and temperature sensor were performed for tensile test specimen. To design a molding system, standard system of mold-base and international standard of tensile test specimen were used. The dimensions of cavity and core part were defined by this standard. Cavity pressure and temperature sensors were placed on the side of fixed platen of injection mold machine to prevent them from external impact damage. The variations of cavity pressure and temperature in injection mold can be obtained by presented system.
21" RF BAND ASS'Y BOX 이송용 적재 시스템 개발
이도명(D. M. Lee),주철완(C. W. Joo),이성희(Sunghee Lee) 한국정밀공학회 2006 한국정밀공학회 학술발표대회 논문집 Vol.2006 No.5월
A transfer loading system for 21" RF band assembly box was developed in the present study. The weight of a box is approximately 60㎏<SUB>f</SUB> and total weight of one day job per person is about 4,000㎏<SUB>f</SUB>. For an efficient design and manufacturing process, three dimensional design and engineering technique were applied to the presented system. Motion analysis for a popup unit and structural analysis for belt part subjected to the load of box weight were performed, respectively. It was found that the evasion of duty and labor intensity is reduced after appling the developed system to manufacturing field of small and midium business.
사출속도 및 수지온도가 Polycarbonate 인장시편의 기계적 물성에 미치는 영향
이성희(Sunghee Lee),이도명(D. M. Lee),한병기(B. K. Han) 대한기계학회 2005 대한기계학회 춘추학술대회 Vol.2005 No.5
An injection molding system for plastic tensile test specimen was designed based on the international standard and manufactured to investigate the effects of injection molding conditions on the mechanical properties of the molded specimen in the present study. To obtain a correct value of pressure and temperature from the presented mold, cavity pressure and temperature sensors were placed on the surface of the mold. Experiments with variations of injection speed and melt temperature were performed and polycarbonate specimens were prepared for the tensile test. It was shown that injection molding processing parameters can have effect on the mechanical properties of the plastic injection molded part.