http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
윤의수,유일수,황순찬,오형우,Yoon, Eui-Soo,Yoo, Il-Su,Hwang, Soon-Chan,Oh, Hyoung-Woo 한국유체기계학회 2011 한국유체기계학회 논문집 Vol.20 No.1
A circulating pump with installation space constraints was developed satisfying performance requirements such as flowrate, head and NPSHAv. The development procedures are composed of conceptual design, configuration design, performance analysis by CFD and performance test which were established in KIMM. The developed pump is OH4 type centrifugal pump which has a mixed-flow type impeller, a double volute and a rigid coupling. As a result of tests, the pump proved to meet all the requirements including space constraints and performance.
민들레 [Taraxacum platycarpum]유식물 절편으로부터 부정아 발생에 미치는 auxin과 cytokinin의 영향 및 식물체 재생
이미현,윤의수,정수진,배기화,서진욱,최용의,Lee, Mi-Hyun,Yoon, Eui-Soo,Jung, Su-Jin,Bae, Ki-Hwa,Seo, Jin-Wook,Choi, Youg-Eui 한국식물생명공학회 2002 식물생명공학회지 Vol.29 No.2
민들레 (Taraxacum platycarpum)는 오래전부터 민간에서 약용으로 이용되어 왔다. 본 실험에서는 민들레로부터 효율적인 식물체 재분화 조건을 조사하기 위해 수행되었다. 부정아 유도에 있어서 적절한 생장조절제와 그 농도를 조사하기 위하여 auxin (2.4-D, NAA) 또는 cytokinin (BAP, kinetin, 2-ip)을 단독, 조합처리 하였다. Cytokinin 단독 혹은 auxin과 조합처리시 부정아가 유도되었는데 이 중 2mg/L BAP에서 가장 높게 나타났다. Cytokinin 단독처리시 종류에 따라 부위별 부정아 형성률이 다르게 나타나며, 민들레의 경우에는 특이하게 뿌리 절편에서 자엽과 배축 절편보다에서 부정아 형성률이 가장 높게 나타났다. 한편 auxin을 cytokinin과 조합처리한 경우에는 cytokinin 단독처리시보다 뿌리 절편에서 부정아 형성률이 급격히 떨어졌다. 반면 자엽 부위로부터 부정아 형성률은 크게 증가되었다. 부정아로부터 부정근의 유도는 0.2mg/L NAA에서 가장 양호하게 나타났으며 인공배양토의 순화과정에서 93%의 높은 생존율을 보였다. 비무균상태의 마사토에서 100%생존함으로써 기외의 포장이식에 어려움이 없을 것으로 생각된다. Taraxacum platycarpum has been used as a medicinal plant. We investigated optimal condition for efficient plant regeneration through adventitious shoot formation on medium with various kinds of growth regulators. Adventitious shoot formation was achieved when cytokinin was used alone. Shoot formation was higher on MS medium containing 2 mg/L BAP compared to that with 2 mg/L kinetin and 2 mg/L 2-ip. Among root, hypocotyl and cotyledon, roots were the best explant for the adventitious shoot induction. Adventitious shoot formation from roots declined markedly by the combination of both 0.1 mg/L NAA and 2 mg/L BAP, while shoot formation from cotyledons was stimulated by the same combination. Root formation from the regenerated shoots was achieved on 1/3MS medium containing 0.2 mg/L NAA. Regenerated plantlets was acclimatized and transplanted to the soil, showing 100% survival.
저비속도 원심 회전차 외경가공에 따른 축추력 불균형을 감쇄시키기 위한 평형 피스톤 수정방안에 관한 고찰
유일수(Il Su Yoo),박무룡(Moo Ryong Park),윤의수(Eui Soo Yoon) 대한기계학회 2011 大韓機械學會論文集B Vol.35 No.9
회전차 외경 가공에 따른 축추력 평형 및 체적 효율 변화에 대하여 고찰하였다. 평형장치로 평형 피스톤이 장착된 저비속도 다단 원심 펌프를 연구 대상으로 해석을 수행하였다. 수평축 다단 펌프와 2종의 수직축 다단 펌프에 대해 해석 수행을 한 결과, 회전차 외경 가공에 의해 펌프 전방으로 추가적인 축추력이 발생하였다. 이러한 축추력 불균형은 수평축 펌프보다 수직축 펌프에서 크게 발생하였다. 축추력 불균형을 방지하기 위해 평형피스톤의 외경을 증가시키는 방안을 제시하였고, 이를 위해 필요한 평형피스톤의 직경 변화율을 산출하였다. 피스톤의 직경 변화량은 회전차 외경 가공률에 비례하여 증가 하였다. 피스톤 직경 변화량이 클수록 틈새 면적 증가로 인해 체적효율이 감소하므로, 피스톤의 길이를 함께 증가시켜 체적 효율의 감소를 방지하는 것이 효과적이다. In the present study, the imbalance in the axial-thrust and variation in the volumetric efficiency that occurred during the trimming of impeller diameter were investigated. The present study was focused on low-specific-speed multistage centrifugal pumps with a balancing piston as the balancing mechanism. The effects of impeller trimming on the axial-thrust balance in multistage pumps with horizontal and vertical axes were compared. The results showed that impeller trimming resulted in an additional axial-thrust acting in direction of pump inlet. The axial-thrust imbalance due to impeller trimming was more severe in the vertical-axis pumps than in the horizontal-axis pumps. The rate of increase in the diameter of the balancing piston, which was proportional to the rate of impeller trimming, was evaluated to maintain the axial-thrust balance. Furthermore, a simultaneous increase in the piston length and piston diameter was more effective for reducing the axial-thrust imbalance along with the volumetric efficiency drop.
저비속도 다단 원심 회전차 외경가공시 축추력 평형을 위한 평형피스톤 수정방안
유일수(Il Su Yoo),박무룡(Mu Ryong Park),윤의수(Eui Soo Yoon) 대한기계학회 2010 대한기계학회 춘추학술대회 Vol.2010 No.11
In present study, the unbalance in axial thrust and the change of volumetric efficiency when trimming the impeller diameter have been investigated. Present study is for the low specific speed multistage centrifugal pumps with balance piston as balancing mechanism. The effect of impeller trimming on the axial thrust balance has been compared in multistage pumps with horizontal axis and vertical axis. As a result of impeller trimmings, an additional axial thrust acting to pump inlet direction. Axial thrust unbalance by impeller trim has presented severely in vertical axis pumps than horizontal axis pump. The balance piston's diameter is required to be increasing proportion to impeller trim rate for maintaining axial thurst balance. And increase in piston length in parallel with increase in piston diameter was more effective to reduce axial thrust unbalance and volumetric efficiency drop as well.
수두 곡선 기울기를 고려한 원자로 냉각재 펌프의 수력설계
유일수(Il Su Yoo),박무룡(Mu Ryong Park),윤의수(Eui Soo Yoon) 대한기계학회 2010 대한기계학회 춘추학술대회 Vol.2010 No.11
The RCP(reactor coolant pump), one of the key machines within nuclear plant, circulates the high-temperature and high-pressure reactor coolant. The hydraulic part in RCP consists of reactor coolant suction nozzle, casing, impeller, diffuser, and reactor coolant discharge nozzle. Among them, impeller, in particular, should be designed to satisfy performance requirements such as NPSHR and performance curve slope. Therefore a preliminary design method reflecting the performance curve slope at design flow rate is required to reduce time consuming due to design process of trial and error. Present study attempts to suggest the preliminary design method determining the approximate size of a pump to satisfy the design requirement like above. In this study, the flow field in mixed-flow pump designed by presently suggested preliminary design is simulated through the use of SST turbulent model.
임펠러 앞전 깃 두께 변화에 따른 원자로 냉각재 펌프의 수력 성능 변화
유일수(Il Su Yoo),최원철(Won Chul Choi),박무룡(Mu Ryong Park),윤의수(Eui Soo Yoon) 대한기계학회 2011 대한기계학회 춘추학술대회 Vol.2011 No.5
The reactor coolant pump consists of suction nozzle, impeller, diffuser, and discharge nozzle. Among them, impeller is required to be designed to satisfy performance requirements such as head, NPSH, and head curve slope at design point. In present study, the performance change with respect to leading edge thickness of impeller blade has been investigated in detail by computational fluid dynamics. As a results of comparison, the optimal design for leading edge thickness of impeller has been carried out to satisfy performance requirements.
임형수,최범석,박무룡,박준영,유일수,서정민,황순찬,윤의수,한상조,Lim, Hyung-Soo,Choi, Bum-Seog,Park, Moo-Ryong,Park, Jun-Young,Yoo, Il-Su,Seo, Jeong-Min,Hwang, Soon-Chan,Yoon, Eui-Soo,Han, Sang-Jo 대한기계학회 2013 대한기계학회 논문집. Transactions of the KSME. C, 산업기술과 혁신 Vol.1 No.1
본 논문은 산업현장에서 발생하는 폐열원을 이용하여 200kW의 발전을 하기위한 터빈의 개발에 관한 전반적인 과정이 제시되었다. 유기 랭킨 사이클에 적용되는 터빈은 세계적으로도 개발이 활발히 진행되고 있는 단계이며, 시장 성장에 관한 잠재성이 크다. 따라서 국내의 연구기관에서도 많은 관심을 가지고 연구가 진행되고 있지만 상품 개발까지는 아직 도달하지 못하고 있는 상황이다. 본 논문에서는 유기 랭킨 사이클에서 작동하는 200kW급 터빈을 개발 하는데, 사이클 해석을 바탕으로 비속도 분석, mean line 해석, 3차원 해석 과정이 설명되었다. 그리고 해석 결과를 바탕으로 터빈 요소 부품을 제작하였고, 회전체 안정성 시험 및 성능시험을 수행하였다. 터빈 개발은 세계적으로도 활발히 이루어지지만 개발 과정과 단계에 대한 사항은 기업 비밀이란 이유로 공개 되지 않는 실정이다. 본 논문은 유기 랭킨 사이클용 터빈의 개발에 있어 어떠한 과정과 단계로 진행되는지 참고가 될 수 있을 것이다. This paper presents the process of turbine development for Organic Rankine Cycle(ORC) system. Development of turbine for ORC system is hot issue in the electric generation market due to the characteristic of organic refrigerant which the evaporate temperature is lower than general refrigerant. Recently, the industry have an interest about ORC turbine development in Korea, and they presented numerous research results. In developing the turbine, several processes can be considered. However, there was few document about ORC turbine development because of the trade secret. This paper can be used as a reference in developing ORC turbine.