http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
박수진 ( Park Su Jin ),진성열 ( Jin Seong Yeol ),유승곤 ( Yu Seung Gon ) 한국공업화학회 2004 공업화학 Vol.15 No.3
본 연구에서는 독성가스의 한 종류인 염화수소(HCI)의 제거를 위해 활성탄소섬유(activated carbon fibers, ACFs)의 표면에 전해 은(Ag) 도금처리를 실시하였으며, 도입된 Ag가 활성탄소섬유의 표면과 기공특성 그리고 HCI의 제거에 미치는 영향을 살펴보았다. Ag가 도입된 활성탄소섬유의 표면특성은 XRD와 SEM을 통해 각각 관찰하였고, 77 K/N_(2) 등온 흡착특성은 BET식과 Boer의 t-polt을 이용하여 비표면적 미세기공의 부피를 확인하였다. 또한 HCI의 제거효율은 가스 검지관을 이용하여 측정하였다. 실험결과, 도금시간이 증가함에 따라 활성탄소섬유 표면의 Ag의 함량은 증가한 반면에 활성탄소섬유의 흡착특성인 비표면적과 미세기공부피 등은 점차 감소하였다. HCI의 제거효율은 미처리 활성탄소섬유에 비하여 Ag가 도입된 활성탄소섬유에서 높은 값을 보였지만. 일정량 Ag가 도입된 Ag-5의 경우는 감소하였다. 이를 통해 활성탄소섬유의 흡착특성과 표면에 도입된 Ag는 HCI의 제거에 있어서 중요한 역할을 하는 것으로 판단되어진다. In this work, the activated carbon fibers (ACFs) containing silver metal were prepared by Ag electroplating, in order to remove the toxic HCI. The surface properties of the ACFs were determined by using XRD and SEM measurements. 77 K/N2 adsorption isotherm characteristics, including the specific surface area and micropore volume, were investigated by BET and t-plot methods. Also, HCl removal efficiency was confirmed by a gas-detecting tube technique. As a result, Ag content on the ACFs increased with increasing the plating time. However, within the range of well-developed micropore structures, a slightly gradual decrease of adsorption properties, such as BET`s specific surface area and total pore volume, were observed by increasing the plating time. HCI removal efficiency of all Ag/ACFs except extremely treated sample (Ag-5) showed higher values than those of untreated ACFs. These results indicated that the presence of Ag on the ACFs played an important role in improving the HCI removal over carbon surfaces, due to catalytic reactions of ACFs-Ag-Cl.
진항교(Hang-Kyo Jin),이정민(Jung-Min Lee),유승곤(Seung-Kon Ryu) 한국진공학회(ASCT) 1993 Applied Science and Convergence Technology Vol.2 No.4
비표면적이 다양한 피치계 활성탄소섬유에 질소와 이산화탄소를 흡착시켜 분석하여 기공특성을 고찰하였다. 질소 등온흡착선은 전형적인 Type 1이었고 이산화탄소 등온흡착선은 위로 볼록한 곡선이었다. 비표면적이 증가할 때 BET 상수, C는 감소하였고 협미세기공부피 (narrow micropore volume)은 비슷하였으나 평균기공직경, 기공크기 분포의 폭, 광미세기공부피(wide micropore volume), 총미세기공부피(total micropore volume), 총기공부피(total pore volume), 외부표면적(external surface area)는 증가하였다. 전체기공부피 중 미세기공부피는 97% 이상으로서 활성탄보다 미세기공이 잘 발달되어 있었다. The adsorption of nitrogen (77K) and carbon dioxide(273K) was performed on a series of activated carbon fiber. The adsorption isotherm of nitrogen was typical type 1 and that of carbon dioxide was convex. As the specific surface area increases, there are linear increases in BET constant C, mean pore diameter, the width of pore size distribution, wide micropore volume, total micropore volume, total pore volume and external surface area, however, narrow micropore volume was nearly constant. The total micropore volume fraction in total pore volume is above 97%.
Ding Chenfeng,Yan Xiaodong,Lan Jin-le,유승곤,Yu Yunhua,Yang Xiaoping 한국탄소학회 2019 Carbon Letters Vol.29 No.3
Sustainable biomass-derived porous carbons demonstrate excellent capacitive properties owing to their heteroatom-rich nature and distinct textural feature. Herein, a series of nitrogen-/phosphorus-/oxygen-containing microporous carbons (CWW-N/P/O-MPCs) have been successfully fabricated by etching in H2O2 solution, pre-treatment of camphor wood wastes with KOH solution and subsequent carbonization. As an electrode material for supercapacitors, the typical microporous carbon (CWW-N/P/O-MPCs-0.5) exhibits a remarkably high specific capacitance of 245 F g−1 at 0.5 A g−1, corresponding to an impressively large volumetric capacitance of 208 F m−3, and excellent long-term stability over 10,000 cycles. The excellent electrochemical performance can be ascribed to the optimal combination of heteroatom groups and ultrafine micropores.