http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
1 N급 단일추진제 추력기 개발모델의 장기수명 연소시험 -Part I: 환경시험 및 연속모드 성능 특성
원수희,김수겸,전형열,이준,박수향,이재원,Won, Su-Hee,Kim, Su-Kyum,Jun, Hyoung-Yoll,Lee, Jun-Hui,Park, Su-Hyang,Lee, Jae-Won 한국추진공학회 2014 한국추진공학회지 Vol.18 No.6
1 N급 단일추진제 하이드라진 추력기 개발모델에 대한 인수수준 랜덤 진동시험과 장기수명 연소시험이 수행되었다. 랜덤 진동시험 결과로부터 1 N급 추력기 개발모델로 구성된 이중추력기모듈의 고유 진동수는 부품수준 요구조건(100 Hz)을 상회하였으며, 구조적으로 강건함을 확인하였다. 또한 20 kg 이상의 추진제가 사용된 장기수명 연소시험 결과 연속모드 추력 감소는 약 7% 이하, 추력 불안정 현상은 ${\pm}5%$ 이내로 나타났다. 컴퓨터단층촬영을 이용해 추력기 내부의 촉매를 촬영한 결과 촉매의 손실은 약 7% 이하로 추력기 개발모델의 설계가 적절함을 보여주었다. Acceptance level random vibration and life firing test for development model of 1 N-class monopropellant thruster have been performed. From the results of random vibration, the natural frequency of the dual thurst module composed of 1 N-class development model thrusters was higher than the part level requirement(>100 Hz) and the structural robustness was verified. Thrust decrease of steady sate was below 7% and thrust instability was within ${\pm}5%$ in the life firing test using over 20 kg propellant throughput. The computerized tomography for catalyst bed showed a less than 7% of catalyst loss and it revealed the design appropriateness of the current thruster development model.
초기 궤도운용 분석 기반 저궤도 지구관측위성 추진시스템 성능 검증
원수희,채종원,김수겸,조성권,전형열 한국위성정보통신학회 2016 한국위성정보통신학회논문지 Vol.11 No.1
인공위성 추진시스템은 위성이 발사체와 분리되어 최종 임무궤도에 진입하기까지 궤도조정에 필요한 추력을 제공하고, 임무궤도에진입한 이후에는 궤도경사각 제어 및 항력에 의한 궤도 저하를 보상하기 위한 추력을 제공한다. 위성 발사 후 초기운용 기간 동안획득된 궤도운용결과를 바탕으로 위성의 운용모드에 따른 저궤도관측위성 추진시스템의 궤도성능 검증을 수행하였다. 또한 추진시스템을 구성하는 부품 및 배관에서의 온도변화 추이를 살펴 추진계가 정상적인 범위 내에서 운용되고 있음을 확인하였다. The satellite propulsion system provides the required thrust to insert a satellite into the desired orbit after separation from the launch vehicle and to control orbit inclination or compensate altitude loss due to drag after inserted into the desired orbit. The on-orbit performance of LEO satellite propulsion system according to operation mode was verified based on the results analysis for early on-orbit operation. The temperature trends of components and tubing were checked and the resultant trends were within the normal range as well.
1 N급 단일추진제 추력기 개발모델의 장기수명 연소시험 -Part II: 펄스모드 성능 특성
원수희,김수겸,전형열,이준희,박수향,이재원,Won, Su-Hee,Kim, Su-Kyum,Jun, Hyoung-Yoll,Lee, Jun-Hui,Park, Su-Hyang,Lee, Jae-Won 한국추진공학회 2014 한국추진공학회지 Vol.18 No.6
1 N급 단일추진제 추력기 개발모델의 장기수명 연소시험 동안 펄스모드 성능 특성 및 성능 추이를 살펴보았다. 응답 시간의 경우 주입압력조건에 따른 편차가 상대적으로 크지 않았으며, 점화지연, 반응시간, 하강시간이 각각 32-35 ms, 86-91 ms, 89-98 ms인 결과를 보여주었다. 안정화된 펄스 영역에서 주입압력조건에 따라 임펄스 비트는 $3{\sigma}$ 기준 1.41, 1.32, 2.10%의 뛰어난 재현성을 보여주었다. 장기수명 연소시험 동안 임펄스 비트가 다소 감소하지만 그 감소폭은 제한적이며, 따라서 펄스모드 성능이 유지되었다. 추력 중심 지연 또한 장기수명 연소시험 동안 일정한 것을 확인할 수 있었다. During the life firing test of 1 N-class thruster development model, pulse mode performance and performance changes were examined. The deviation of pulse mode response time according to thruster feed pressure was relatively small and the resultant ignition delay, response time, tail-off time were 32-35 ms, 86-91 ms, 89-98 ms, respectively. For the stabilized pulse region the impulse bit revealed the outstanding reproducibility of 1.41, 1.32, 2.10% at $3{\sigma}$. During the life firing test, the impulse bit was decreased with limited amounts, therefore the pulse mode performance could be considered to be maintained. The thrust centroid was also maintained during the life firing test.