http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
폐(廢) 냉장고(冷藏庫) 재활용(再活用) 현황(現況)과 기술(技術) 전망(展望)
양현석,김건홍,공만식,박기진,이광원,김보생,Yang, Hyunseok,Kim, Geon-Hong,Kong, Man-Sik,Park, Kiejin,Lee, Gwang Weon,Kim, Bo Saeng 한국자원리싸이클링학회 2013 資源 리싸이클링 Vol.22 No.4
냉장고는 폐 전기전자제품(WEEE)에서 가장 많은 양이 처리되고 있는 품목이며 또한 가장 재활용이 복잡한 공정이다. 이는 가전제품 중 부피와 중량이 가장 크며 철, 비철금속, 플라스틱(PP, PS, ABS)등으로 이루어진 다양한 부품과 소재를 사용하고 있기 때문이다. 특히 최근에는 대용량 양문형 냉장고나 스탠드형 김치냉장고 등의 새로운 모델 출시와 더불어 다양한 혼합 재질의 사용으로 인해 폐 냉장고 재활용 공정의 어려움이 더욱 증가되고 있다. 뿐만 아니라 국내외 WEEE 재활용 관련 입법의 도입으로 폐 냉장고의 재활용 및 재자원화는 필수이고 관련 자원순환기술개발은 국가 기술경쟁력의 강화 및 국제 환경규제 대응 측면에서도 매우 중요하다고 할 수 있다. 따라서 현재 우리나라의 폐 냉장고 재활용 처리 및 기술개발 현황을 분석하고 선진국의 재활용 기술을 비교 분석하고자 한다. Waste refrigerator is the most large amount of item being recycled and the recycling process is the most complicated in WEEE (Waste Electrical and Electronic Equipment) because refrigerator is biggest product and consists of various parts and materials such as ferrous, non-ferrous, and plastics. Recently, recycling process of waste refrigerator has been being more complex since large capacity 2 door refrigerators and standing Kimchi refrigerators with various material are distributed on custom market. In addition, recycling of valuable resource from waste refrigerator is mandatory by WEEEs recycling legislation; therefore, high efficiency recycling enough for economic and environment-friendly recovery of valuable resource through present technical situation analysis and comparison of recycling technologies of waste refrigerator with advanced country.
박경수(Park, Kyoung-Su),박노철(Park, No-Cheol),양현석(Yang, Hyun-Seok),박영필(Park, Young-Pil),이용현(Lee, Yong-Hyun) 한국소음진동공학회 2005 한국소음진동공학회 논문집 Vol.15 No.11
L/UL(Load/unload) mechanism has been widely used in SFF(Small form factor) HDD because L/UL technology has many advantages such as an increase of areal density, reduction of power consumption and improvement of shock resistance. In this system, the most important design goal is no slider-disk contact and fast air-hearing breaking during L/UL process. To do so, we should consider many design parameters related to L/UL system. The ramp shape is the most dominant component among parameters which dramatically affect the L/UL performance. This paper makes an advanced ramp model using ANSYS/LS-DYNA. Through this FE model, this paper investigates the effect of initial ramp slope and location of air-bearing breaking. From the experiment for three different ramps, we also verify that experimental results agree with simulation results. We conclude that the ramp design should have small ramp slope at the moment which a suspension tap contacts with ramp and large ramp slope after air-bearing breaking in order to improve L/UL Performance.
고밀도 광학헤드를 위한 Bimorph 압전 액추에이터의 동특성 해석 및 위치제어
박태욱(Park, Tae-Wook),박노철(Park, No-Cheol),양현석(Yang, Hyun-Seok),박영필(Park, Young-Pil),권영기(Kwon, Young-Ki) 한국소음진동공학회 2005 한국소음진동공학회 논문집 Vol.15 No.1
This paper proposed a dual actuator using Bimorph PZT for information storage device based on prove array NSOM(near-field scanning optical microscopy). The gap between the media and the optical head should be maintained within the optical tolerance. Therefore, a new actuator having high sensitivity is required. Bimorph PZT, which has fast access time and high sensitivity characteristic, is suitable for this precise actuating system. This paper is focused on derivation of mathematical model of dual Bimorph PZT actuator and control algorithm. Hamilton's principle was used for mathematical model. The model is verified by FEA(finite element analysis), and compared with experimental results. Different control algorithms were used for two Bimorph PZT actuating same direction and opposite direction. The gap between recording media and optical head was controlled within 20nm in experiment.