http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
지반의 진행성 파괴와 기초의 크기 효과를 고려한 지지력 특성에 관한 실험적 연구
임종철,안민홍,홍석우,강정철,여종인 釜山大學校生産技術硏究所 1999 生産技術硏究所論文集 Vol.56 No.-
얕은 기초의 지지력을 산정하는데 있어서 기존 이론의 지지력계수(Nc,Nr,Nq)는 흙의 내부마찰 각 φ만의 함수로 표현되어져 있다. 그리고 조밀한 모래지반에서는 동시파괴(전반전단파괴)가 발생한다고 가정하고 있다. 본 논문에서는 주문지 표준사를 이용하여 중간·조밀한 모래지반을 제작하여, 재하폭 B를 변화시켜 실험하였다. 실험 결과, 조밀한 모래지반에서도 진행성파괴가 발생하며, 지지력계수 Nr의 평가에 있어서 내부마찰각 φ뿐만 아니라, 재하폭 B의 영향이 고려되어져야 함을 알 수 있었다. The bearing capacity factors(Nc,Nr,Nq) of an existing formulae are the function of only internal friction angle(φ) in calculating of ultimate bearing capacity of shallow foundations. And it is assumed that the simultaneous failure(general shear failure) occurs in the dense sand. In this study, the medium to dense sand grounds are formed by Joomunjin standard sand, and the laboratory medel tests are made with the change of load-width(B). By test it is known that the progressive failure is also occurred in the dense sand ground and so the bearing capacity factor(Nr) should be considered for not only internal friction angle(φ) but also the effect of load-width(B).
평판재하시험과 실내시험에 의한 지반의 강도정수 비교에 관한 연구
임종철,이태형,안민홍,이헌일 釜山大學校生産技術硏究所 1999 生産技術硏究所論文集 Vol.57 No.-
기초의 지지력 산정방법 중에서 이론식에 의한 지지력의 산정법은 지반의 강도정수를 요소시험을 통하여 구한 후에 그 강도정수로서 지지력 계수와 극한 지지력이 구해질 수 있다. 그러나 요소시험(삼축압축시험, 평면변형률 압축시험)에 의한 지반의 강도정수는 균질한 지반의 극히 작은 시료를 통하여 구해지는 값이므로 지반 토괴로서의 특성을 나타내지 못한다. 더우기 현장에서의 지반의 강도정수 평가는 상당히 어렵다. 본 연구에서는, 현장 평판재하시험 결과를 이용하여 지반의 강도정수를 산정하고, 실내시험 결과와 비교하여 강도정수비를 정의 하였다. 이 강도정수비를 사용하면 평판재하시험에 의해 지반의 강도정수 (c, ø)를 구할 수 있다. The bearing capacity of the foundation can be calculated by using the soil rarameters(c, ø) obtained by the element test(triaxial compression test, plane strain compression test). But, as these parameters are obtained by using small specimens, so these values can't represent the characteristics of ground as a mass. In this paper, the strength paremeters can be estimated with the results of the field plate bearing tests. The parameter ratio is defined by comparing with the results of laboratory tests. We can obtain the strength parameters of ground mass by using the results of field plate bearing tests and this parameter ratio.