http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
안규복(Kyubok Ahn),김종규(Jong-Gyu Kim),조미옥(Miok Joh),김성구(Seong-Ku Kim),유철성(Chulsung Ryu),최환석(Hwan-Seok Choi) 한국추진공학회 2013 한국추진공학회 학술대회논문집 Vol.2013 No.5
한국형발사체 3단에 케로신과 액체산소를 추진제로 하는 7톤급 액체로켓엔진이 사용될 예정이다. 본 논문에서는 7톤급 엔진 연소기에 적용될 재생냉각 연소실(노즐 팽창비 94.5)의 설계 및 열수력 해석 결과를 나타내었다. 또한 연소기 헤드의 평가를 위해 지상연소시험용으로 사용될 재생냉각 연소실(노즐팽창비 22.0)의 설계 및 제작에 대한 내용을 기술하였다. A 7 tonf-class liquid rocket engine using kerosene and liquid oxygen will be applied to the third stage of the Korea space launch vehicle II. The paper explains the design and heat/hydraulic analysis of a regeneratively-cooled combustion chamber with an expansion ratio of 94.5 for the 7 tonf-class engine. It also deals with the design and manufacture of a regeneratively-cooled combustion chamber with an expansion ratio of 22.0 for ground tests of mixing heads.
안규복(Kyubok Ahn),강동혁(Donghyuk Kang),최환석(Hwan-Seok Choi) 한국추진공학회 2012 한국추진공학회 학술대회논문집 Vol.2012 No.5
한국형발사체 3단에 사용될 7톤급 액체로켓엔진 연소기의 연소시험을 위해 기존 지상연소시험장 고주파 계측 시스템을 개량하였다. 본 논문에서는 개량된 고주파 계측 시스템의 설계 및 주요 기능을 설명하였다. The high-frequency data acquisition system of the rocket engine test facility has been updated to perform hot-firing tests of 7 ton-class liquid rocket engine combustion chambers which will be used for the third stage of the Korea space launch vehicle Ⅱ. The paper deals with the design of the updated high-frequency data acquisition system and explains its main functions.
안규복(Kyubok Ahn),강동혁(Donghyuk Kang),김문기(Munki Kim),임병직(Byoungjik Lim),김종규(Jong-Gyu Kim),서성현(Seonghyeon Seo),최환석(Hwan-Seok Choi) 한국추진공학회 2010 한국추진공학회 학술대회논문집 Vol.2010 No.11
추력 75톤급 액체로켓엔진용 가스발생기의 초기 검증을 위해 축소형 모델에 대한 연소시험이 수행되었다. 본 논문에서는 축소형 가스발생기 연소시험 중 발생한 저주파 연소불안정에 대하여 분석을 수행하였다. Hot-firing tests were performed on a sub-scale gas generator for development of a 75 ton-class liquid rocket engine. This paper deals with the analysis results of low-frequency combustion instability that encountered during combustion tests of the gas generator.
안규복(Kyubok Ahn),임병직(Byoungjik Lim),김종규(Jong-Gyu Kim),한영민(Yeoung-Min Han),최환석(Hwan-Seok Choi) 한국추진공학회 2010 한국추진공학회지 Vol.14 No.5
For the development of a liquid rocket engine, hot-firing tests of a regeneratively cooled thrust chamber were performed at chamber pressures of approximately 30 and 60 bars. In the paper, pressure fluctuation data, which were obtained from the dynamic pressure transducers installed in propellant manifolds and combustion chamber, were analyzed. Compared to the data at chamber pressure of 60 bar, the results at chamber pressure of 30 bar showed low-frequency oscillations around 150 Hz in the combustion chamber. The low-frequency waves in the combustion chamber were coupled with those in the manifolds. However, the RMS values of the chamber pressure fluctuations at chamber pressure of 30 bar were only 0.8% of the chamber pressures. Thus, it can be inferred that the thrust chamber operates in the stability boundary even at low chamber pressure.
75톤급 엔진 1/2.5-scale 연소기 압력 섭동 분석
안규복(Kyubok Ahn),강동혁(Donghyuk Kang),김문기(Munki Kim),임병직(Byoungjik Lim),김종규(Jong-Gyu Kim),이광진(Kwang-Jin Lee),서성현(Seonghyeon Seo),한영민(Yeoung-Min Han),최환석(Hwan-Seok Choi) 한국추진공학회 2010 한국추진공학회 학술대회논문집 Vol.2010 No.5
본 논문에서는 75톤급 액체로켓엔진 1/2.5-scale 연소기의 연소시험에서 얻어진 동적특성 결과에 대해 기술하였다. 엔진 시동 구간 및 연소실 압력에 따른 동적특성 변화를 살펴보기 위해 연소실 압력 30 bar와 60 bar 상태에서 연소시험이 수행되었으며 이에 따른 연소기의 연소안정성을 검토하였다. In the paper, the dynamic characteristics obtained from hot-firing tests of 1/2.5-scale thrust chamber for 75 tonf-class liquid rocket engine were described. To investigate the dynamic characteristics by engine start transient period and chamber pressure variation, hot-firing tests were performed in the chamber pressures of 30 bar and 60 bar. According to these variations, combustion stability in the combustion chamber was examined.
안규복(Kyubok Ahn),서성현(Seonghyeon Seo),김문기(Munki Kim),임병직(Byoungjik Lim),김종규(Jong-Gyu Kim),이광진(Kwang-Jin Lee),한영민(Yeoung-Min Han),최환석(Hwan-Seok Choi) 한국추진공학회 2009 한국추진공학회 학술대회논문집 Vol.2009 No.11
추력 75톤급 액체로켓엔진용 기술개발/검증 시제인 가스발생기의 연소시험이 수행되었다. 가스발생기 분사기 및 헤드의 성능을 먼저 확인하기 위해 heat-sink 형태의 연소실이 사용되었다. 본 논문에서는 연소시험을 위한 준비상황 및 기술검증시제 연소시험에서 얻어진 압력, 온도 분포, 압력 섭동 등의 결과들을 설명하였다. Hot-firing tests were performed on the gas generator which is a technology development/demonstration model for a 75 ton-class liquid rocket engine. A heat-sink type combustion chamber was used for initial performance examination of the injector and mixing head. This paper explains not only preparation works for hot-firing tests but also the acquired results such as pressure, temperature distribution, and pressure fluctuation.