http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
신명수 ( Myoung Soo Shin ),차성훈 ( Sung Hoon Cha ),김종봉 ( Jong Bong Kim ),김종호 ( Jong Ho Kim ),나승우 ( Seung Woo Ra ) 한국고무학회 2009 엘라스토머 및 콤포지트 Vol.44 No.4
본 연구에서는 전조공정의 수치해석을 수행하였다. 해석을 이용한 공정 인자 설계에 앞서서, 효율적이고 신뢰성 있는 해석을 위한 해석 조건에 대하여 연구를 수행하였다. 치형의 개수와 요소의 수에 대한 해석 결과를 바탕으로 해석의 정도를 보장하고 효율적으로 해석을 수행할 수 있는 조건을 설정하였다. 그리고, 프랭크 각도와 치형의 끝단부 라운드 등의 금형의 형상과 성형 온도가 유효 응력, 유효 변형율, 전조력, 그리고 크랙 발생에 미치는 영향을 알아보았다. 해석은 DEFORM-3D를 이용하여 수행하였다. 프랭크 각도와 치형의 끝단 부 라운드는 전조력에 영향을 미치는 것을 확인할 수 있었으며, 성형 온도 조건에 따라서 유효 변형률과 전조력, 그리고 크랙을 예상 할 수 있었다. This paper presents the numerical analysis of thread rolling. Firstly, the analysis is focused on the effective analysis conditions that guarantee the reliability of the analysis results. The investigated parameters are the number of teeth and the number of elements. Using the analysis results, the number of elements and the number of teeth that guarantee the results are found. And then, the effects of the process parameters such as tool shape and temperature on the thread rolling are investigated. The analysis is carried out using DEFORM-3D. The results show that the flank angle and crest round have an effect on the thread rolling load. It is also shown that temperature have significant effects on the effective strain distribution, rolling load, and crack initiation. The crack initiation is predicted using the Cockcroft-Latham criterion.
차성훈(Sung-hoon Cha),신명수(Myoung-Soo Shin),신현호(Hyunho Shin),김종봉(Jong-Bong Kim) 대한기계학회 2008 대한기계학회 춘추학술대회 Vol.2008 No.11
The interest in the mechanical behavior of materials at high strain rates has increased in recent years, and by now it is well known that mechanical properties can be strongly influenced by the speed of applied load. The split Hopkinson pressure bar (SHPB) has been widely used to determine mechanical properties of materials at high loading rates. However, to ensure test reliability, measurement error source must be accounted for and eliminated. During experiment, the specimens were located between the incident and the transmit bar. The presence of contact frictions between the test bars and specimen may cause errors. In this work, numerical experiments were carried out to investigate the effect of friction on test results. In SHPB test, the measured stress by the transmitted bar is assumed to be flow stress of the test specimen. Through the numerical experiments, however, it is shown that the measured stress by the transmit bar is axial stress components. When, the contact surface is frictionless, the flow stress and the axial stress of the specimen are about the same. When the contact surface is not frictionless, however, the flow stress and the axial stress are not the same anymore. Therefore, the measured stress by the transmitted bar is not flow stress. The effect of friction on the difference between flow stress and axial stress is investigated.
강재경,송정국,정현교,신명수,윤병민,Kang, Jae Kyoung,Song, Jung-Kook,Jeong, Hyun Gyo,Shin, Myoung Soo,Yun, Byung Min 대한두개안면성형외과학회 2012 Archives of Craniofacial Surgery Vol.13 No.2
Purpose: To reconstruct the midface, local flaps such as nasolabial flaps have been frequently used. These local flaps, however, have the shortcomings of requiring a secondary operation or limitations in the movement of the flap. Thus, new methods have been developed. This paper reports a case wherein the basal cell carcinoma on the cheek was resected and the skin and soft tissue defect was successfully treated using a facial artery perforator flap. Methods: A 68-year-old female consulted the authors on the basal cell carcinoma that developed on her cheek. The mass was fully resected and revealed a $2.3{\times}2.3cm$ defective region. Using a Doppler ultrasonography, the facial artery path was traced, and using a loupe magnification, the facial artery perforator flap was elevated and the defective region was covered with the flap. Results: The flap developed early venous congestion, but it disappeared without any treatment. Six months after the surgery, the patient was satisfied with the postoperative result. Conclusion: The facial artery perforator flap has a thin pedicle. It offers a big arc of the rotation that allows free movement and one-stage operation. These strengths make the method useful for the reconstruction of the midface among other procedures.
이재성,임길채,김정홍,강재경,신명수,윤병민,Lee, Jae Seong,Lim, Gil Chae,Kim, Jeong Hong,Kang, Jae Kyoung,Shin, Myoung Soo,Yun, Byung-Min The Korean Society for Head and Neck Oncology 2019 대한두경부 종양학회지 Vol.35 No.1
Recent studies have reported on the reconstruction of oral mucosal defects using acellular dermal matrix (ADM). This case report describes the reconstruction of a soft-palate mucosal defect using ADM. A 43-year-old man developed a $2.5cm{\times}3cm$ soft-palate mucosal defect after the removal of a lump on the soft palate andreconstructed the defect using ADM without further complications. Reconstruction of the soft palate with ADM could be more convenient than traditional methods including primary closure, skin graft, and local or free flap without complications.