보문 : 노년 여성의 3-D 입체형상 데이터를 활용한 상반신 원형 설계방법 연구

서추연 ( Chu Yeon Suh ),박순지 ( Soon Jee Park ) 韓國衣類學會 2008 한국의류학회지 Vol.32 No.5

보문 : 국내,외 브래지어의 패턴비교분석 및 착의평가 연구

서추연 ( Chu Yeon Suh ) 한국의류학회 2010 한국의류학회지 Vol.34 No.4

한국(韓國) 직장남성(職場男性)의 기성화(旣成靴) 착용(着用)에 관(關)한 실태조사연구(實態調査硏究)

서추연 ( Chu Yeon Suh ),박순지 ( Soon Jee Park ),박은주 ( Eun Joo Park ) 한국패션비즈니스학회 2001 패션 비즈니스 Vol.5 No.3

This study is to provide basic data for the development of domestic ready-made shoes industry by illustrating any problem in regards to the ready-made shoes for ordinary salary men through looking into its uses and gratifications. Subjects for this study were in between twenties and sixties by applying convenient random sampling method, which was done in January to February, 2001. The results were as follows: 1. General foot shape of subjects was that foot breadth was wide whereas instep height was average. In regards to the metamorphic parts of foot, the most metamorphic part was the fifth toe which could be occurred by disagreeable shoes to foot. 2. General salary men (69.5%) wear the formal shoes and their wearing time per day is over 10 hours (49%), which illustrates that more suitable and convenient functional shoes needs to be developed. 3. Almost of subjects tended to purchase ready-made shoes, and their concerns to be considered when to purchase ready-made shoes were its size and solidity. This finding suggests that the size specification of the ready-made shoes needs to be more specific in terms of its length as well as foot breadth. 4. The most unsatisfied point on the ready-made shoes was the foot breadth. According to the Crosstabulation analysis on the discomfort part and the foot breadth, there existed a significant correlation between the discomfort part and the foot breadth (p≤0.05). The above results make clear that overall salary men have complaints on the ready-made formal shoes in terms of its size and wearing comfort level. This suggests that the subdivision of the shoes size specification needs to be developed to improve the wearing comfort level.

국내외 의류 생산 동향 : 한국 봉제 산업의 해외 진출 현황

서추연 ( Chu Yeon Suh ) 한국의류학회 2008 패션정보와 기술 Vol.5 No.-

중국 남성의 슬랙스 패턴설계를 위한 연령층별 하반신 체간부 비교 분석 -절강성 영파 지역을 중심으로-

서추연 ( Chu Yeon Suh ),이소영 ( So Young Lee ),심부자 ( Boo Ja Shim ) 한국패션비즈니스학회 2009 패션 비즈니스 Vol.13 No.4

This study was focused on classifying lower-body trunk and revealing the lower-body characteristics of the Chinese males in their 20s through 40s for their slacks pattern design. Compared with the 20s, the subjects in their 30s and 40s had small vertical and big horizontal sizes and showed a somatotype difference through a horizontal change. According to the size of absolute values, the lower body of Chinese men was "tall and normal trunk"(43.9%). Based on the shape of index values, Type 3(40.3%) was representative with average hip-surface length, waist-hip width difference and long upper hip. While Type 3 was seen a lot in the 20s(51.8%), 30s and 40s were each represented by Type 2(47.1%) with the smallest waist-hip width difference, average upper hip, and long hip-surface length and Type 1(45.9%) with small waist-hip width difference, average upper hip, and short hip-surface length. As this study is confined to Ningbo City of Zhejiang Province and has a small number of subjects, the generalization of the findings should be more serious. Further research will be centered on the development of slacks patterns in consideration of the body type changes.

직장 여성을 위한 기능적인 임부복 개발

서추연 ( Chu Yeon Suh ),박순지 ( Soon Jee Park ),이희정 ( Hee Jung Lee ) 대한가정학회 2007 Family and Environment Research Vol.45 No.9

교육용 스커트 슬로퍼 개발을 위한 스커트 슬로퍼 비교분석 연구

서추연(Suh, Chu Yeon) 한국디자인문화학회 2016 한국디자인문화학회지 Vol.22 No.2

본 연구는 교육용 스커트 슬로퍼(skirt sloper) 개발에 관한 연구로 3D 가상착의평가를 통한 교육용 스커트 슬로퍼를 비교분석하였으며, 또한 대학교육을 받고 있는 학생들의 연령이 대부분 20대 초반임을 감안할 때, 20대 초반의 체형특성을 반영한 교육용 스커트 슬로퍼를 개발하기 위한 기초자료를 제시하고자 하였다. 본 연구에서는 현재 각 대학에서 사용하고 있는 패턴메이킹 관련 교과서 8종을 선정하고 각 교재에서 제시하고 있는 기본형 스커트 슬로퍼를 연구대상 슬로퍼로 선정하였고 패턴비교분석과 3D 시뮬레이션을 통한 가상착의 평가를 실시하여 그 차이점을 분석하였다. 이상으로부터 얻은 연구결과는 다음과 같다. 교육용 교재의 기본 스커트 슬로퍼는 오른쪽 반을 기준으로 앞 뒤 각각 2개의 다트가 있는 것으로 기본적으로 허리에는 0∼2.4㎝, 엉덩이 둘레는 0∼5.2㎝의 여유량을 두고 있으며, 제도에 사용되는 필요치수로는 허리둘레, 엉덩이둘레, 엉덩이길이, 스커트길이를 사용하고 그 외에 엉덩이앞길이, 엉덩이뒤길이, 엉덩이옆길이, 중간엉덩이둘레를 사용하는 슬로퍼도 있는 것으로 분석되었다. 교육용 스커트 슬로퍼의 패턴분석 결과, 각 슬로퍼 간의 차이가 분명하게 나타났으며 외관평가와 선호도 평가를 통하여 20대가 선호하는 스커트 슬로퍼 개발을 위한 기초자료를 구할 수 있었다. 3D시뮬레이션을 통한 가상 착의평가 결과, 각 패턴간의 여유 분포에 따른 차이를 알 수 있었다. 스커트는 하반신을 감싸는 형태로 엉덩이둘레에 여유분을 더하여 전체 폭으로 설정하고 있는데 3D 착의평가 결과, 넙다리 및 엉덩이 부위의 변형율이 큰 것으로 나타나 전체 폭 설정시 반드시 넙다리둘레를 고려한 치수설정이 이루어져야 함을 시사하였다. This research on development of the skirt slopers for education aimed to suggest the issues in comparison with the skirt slopers for education through 3D virtual wearing evaluation and the basic data to develop the skirt slopers for education given the body shape of those in their early 20s, as most of the university students are in their early 20s. For this study, 8 textbooks that are used in universities were selected and analyzed basic skirt sloper presented in textbooks. The results of this study are as follows. The basic skirt slopers for educational materials have two darts each at the front and back of the right half with 0∼2.4㎝ ease amount for waist circumference and 0∼5.2㎝ ease amount for hip circumference. The required measurements for drafting include waist circumference, hip circumference, hip length and skirt length and some slopers were analyzed to use front hip length, back hip length, side hip length and central hip circumference. According to the analysis on the pattern of the skirt slopers for education, there were clear differences between each sloper and the amount and position of darts should be set after considering the body shape of those in their 20s rather than fixed by drafting. The fitting test through 3D simulation discovered the difference between each pattern depending on the margin. Skirt is in the form of wrapping the lower body, and its whole circumference is set by adding the margin of hip circumference. However, the 3D fitting test had a high change rate of thigh, indicating that the whole circumference of skirt should be measured given the thigh circumference.

보문 : 체표면분할법에 의한 성인 남성용 피티드 토르소형 원형 설계

서추연 ( Chu Yeon Suh ) 韓國衣類學會 2009 한국의류학회지 Vol.33 No.7

고등학교 기술·가정 교과서의 ‘한복과 창의적인 의생활’ 영역의 교과내용 분석연구 -2015 개정 교과과정을 중심으로-

서추연(Suh Chu-Yeon) 한복문화학회 2021 韓服文化 Vol.24 No.1

This study analyzed the ‘Hanbok and Creative Clothing’ contents in Technology and Home Economics textbooks for a high school under the 2015 Revised Curriculum. Based on the results, this study presented suggestions for Hanbok education. The unit of ‘Excellence of Hanbok’ consists of functionality and aesthetics. The functionality part includes practicality, activity, and sustainability, and the aesthetics part includes lines, forms, colors, materials, balance, and patterns. However, only five types of textbooks cover the historical changes and the cultural background of Hanbok. In the ‘Clothing Culture of Other Countries,’ the name of traditional costumes for the countries are introduced, and the cultural characteristics related to the costumes are described. The constructive characteristics associated with climate, culture, and how people dress are introduced in some textbooks. The "Creative Clothing" unit covers a clothing design by applying Hanbok and a school uniform design using Hanbok elements. The unit also provides design photographs of elements that can be utilized to design modern costumes about shapes, materials, and decorative details of Hanbok and explain each photograph. Based on the above results, the following suggestions were presented. First, for the "Excellence of Hanbok" unit, the historical changes of Hanbok should be dealt with essentially for Hanbok education. Moreover, when selecting the subjects related to Hanbok in the discussion activity, those which can attract the students" attention at the students" level should be considered. Second, the "Clothing of Other Countries" unit should serve as an opportunity to explore the meaning of Hanbok once again in connection with the "Excellence of Hanbok," rather than covering many contents. Third, the "Creative Clothing" unit effectively makes articles for practical daily use rather than creating a new design. The items for the practice suited to "training of creative convergence talents" should also be developed.

목운동에 따른 목과 어깨부위의 체표변화에 관한 연구

김혜경,박순지,서추연,석은영,Kim, Hae-Kyung,Park, Soon-Jee,Suh, Chu-Yeon,Suk, Eun-Young 대한인간공학회 2002 大韓人間工學會誌 Vol.21 No.1

With the wide range of movement, the movement of neck accompanies the body surface change of neck and shoulders. And neck corresponds to the collar of garment, meaning that the body surface change of this part affects the construction of patterns for collars. So the purpose of this study was to manifest the changes of body surface in the neck and shoulder accompanied with the movement of the neck and to draw up the facts worth consideration when constructing the collar pattern. In this study, the draft of body surface of neck and shoulder was drawn up by gypsum method according to the 5 movements (standing at attention, neck bending - front, back, right, left). The length of body surface was measured and analyzed by ANOVA, post hoc test, correlation and regression analysis using SPSS 10.0 for Windows. The variation of the surface of neck was remarkable in the vertical lines than the horizontal ones. So the height of collar should be established considering the range of movement of the neck. It was the raising amount of c.f(center front) of neck and girth of neckbase (back) that were proved to have significantly varied after movement. With correlation analysis done, in every movement, the raising amount of side and the girth of neckbase had remarkably positive relation. The movement of the neck accompanied the variation of body surface in the shoulder as well. It was the part of scapula and side of neckbase that the variation was notable, suggesting that the surplus is needed in these parts.