http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
배주현 ( Ju-hyun Bae ),성예원 ( Yae-won Sung ),육예은 ( Ye-eun Yuk ),장윤희 ( Yun-hui Jang ) 한국정보처리학회 2022 한국정보처리학회 학술대회논문집 Vol.29 No.2
반려동물 시장 및 동물 의료분야의 성장, 동물병원 이용 과정 개선의 필요성으로 반려동물 질병의 시작부터 끝까지 전 과정을 함께하는 원스탑 모바일 애플리케이션을 개발하였다. 증상으로 예상 질병을 진단하는 머신러닝 모델과 자연어 문장을 인식하는 딥러닝 챗봇으로 사용자가 편리하게 반려동물 이상 증상에 대한 예상 질병을 챗봇으로 상담할 수 있도록 구현하였다. 챗봇 시스템을 기반으로 ‘예상 진단’, ‘질병백과’, ‘문진표’, ‘동물병원’ 기능을 추가하여 일관된 기능들로 유기적인 서비스를 구성하였다.
배주현(Ju-Hyun Bae),이형주(Hyung Ju Lee),최호진(Hojin Choi),황기영(Ki-Young Hwang) 한국추진공학회 2014 한국추진공학회 학술대회논문집 Vol.2014 No.5
본 연구에서는 고온으로 가열된 유체가 오리피스 인젝터를 통해 분사되는 경우 인젝터 내부의 유동조건에 따른 캐비테이션 현상과 그 영향을 확인하기 위한 수치적 연구를 수행하였다. ICEMCFD<SUP>TM</SUP>로 격자를 생성하고 FLUENT<SUP>TM</SUP>로 CFD 해석을 수행하였으며, 직경 0.7 mm의 오리피스 인젝터를 통해 물을 3 bar의 분사 압력으로 온도 0.1 ~ 120 ℃ 조건으로 분사하였을 때 분사 특성을 유량계수 α로 정량화하였다. 계산 결과 분사온도 50℃ 이상의 영역에서 α는 온도에 따라 감소하는 경향을 보였는데, 이는 온도가 상승할수록 캐비테이션이 활발해지면서 배출시 기포가 많이 섞이기 때문이다. 한편, α를 캐비테이션 수 Kc로 나타낸 결과 Kc가 1.0 이하의 영역에서는 Kc에 따른 α의 기울기가 이전에 연구되었던 실험치와 거의 일치함을 확인하였다. A numerical simulation has been conducted to study the mechansim and effects of cavitation dependent on flow conditions when a heated liquid was injected through an orifice injector. ICEMCFD<SUP>TM</SUP> and FLUENT<SUP>TM</SUP> were used to generate the mesh and perform the CFD analysis, respectively, for the injector with the diameter of 0.7 mm, through which water was injected at the injection pressure of 3 bar and temperature ranging from 0.1 to 120 ℃, and the results were quantified by flow coefficient, α. The study showed that α decreased at the temperature over 5 0℃ due to the high containment of water vapor caused by more active cavitation at high injection temperature. In addition, the slope of α with respect to cavitation number Kc was very similar to that obtained from a previous experimental study when Kc was below 1.0.
조종날개가 장착된 탄도수정탄의 자이로안정성 및 항력 특성 연구
배주현,Bae, Ju Hyun 한국군사과학기술학회 2017 한국군사과학기술학회지 Vol.20 No.3
This paper describes the gyroscopic stability and the drag characteristics of the smart munition with a course correction fuze(CCF). A ballistic analysis was conducted to figure out the effect of the canards on the gyroscopic stability of the projectile. The analysis used the commercial ammunition performance evaluation software: Projectile Design and Analysis System(PRODAS). In particular, we compared the PRODAS analysis results to real field test results to investigate the influence of the CCF mounted projectile. In addition, some ballistic simulations were carried out to provide the conditions suitable for wind tunnel tests. Experimental results show that the added drag force by the canards is almost uniform regardless of the Mach number when the projectile is at the normal position where the angle of rotation and the angle of attack are both 0 degrees. However, as the angle of attack of the projectile increases, the additional drag force depends on the deflection of the canards.
Preparation of Porous Hydrogels Using Blowing Agents and Application to Contact Lenses
Chang Hyun Oh(오창현),Ju-Hyun Bae(배주현),Hyun Mee Lee(이현미) 한국고분자학회 2022 폴리머 Vol.46 No.1
본 연구에서는 발포제가 포함된 고기능의 다공성 하이드로젤을 제조하고 특성을 조사하여 콘택트렌즈로의 응용성을 확인하였다. 그리고 하이드로젤에 들어가는 발포제의 종류와 함량에 따른 물성도 비교하였다. 발포제로 각각 1% 및 3% 탄산나트륨, 탄산수소나트륨, 탄산칼륨 및 중탄산칼륨을 사용하여 하이드로젤 콘택트렌즈를 제조하였다. 물리화학적 특성은 광투과율, 수분함량, 굴절률, 산소투과도, 접촉각, 단백질 흡착을 측정하였다. 발포제의 함량이 증가할수록 수분함량, 습윤성, 산소투과성은 증가하고 굴절률과 인장강도는 감소하였다. 발포제의 양이 증가함에 따라 단백질의 흡착량도 감소하였다. 발포제를 첨가한 하이드로젤은 콘택트렌즈의 기본 광학적 물성을 유지하였으며, 함수율, 산소투과도, 습윤성 등이 매우 우수하여 콘택트렌즈에 적용 가능함을 확인하였다. This study aims to confirm the applicability of a contact lens by manufacturing a high-functional porous hydrogel containing a blowing agent and examining its properties. In addition, the physical properties according to the type and content of the blowing agent in the hydrogel were compared. Hydrogel contact lenses were prepared using 1% and 3% sodium carbonate, sodium bicarbonate, potassium carbonate and potassium bicarbonate as blowing agent, respectively. Light transmittance, water content, refractive index, oxygen permeability, contact angle, protein adsorption were measured for physical and chemical properties. As the amount of blowing agent increased, the water content, wettability, and oxygen permeability increased, but the refractive index and tensile strength decreased. The adsorption amount of protein also decreased as the amount of blowing agent increased. The hydrogel added with the foaming agent maintained the basic optical properties of the contact lens, and it was confirmed that it could be applied to the contact lens because it was very excellent in moisture content, oxygen permeability, and wettability.