http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
등온 저압화학기상침투법에 의한 탄소/탄소 복합재료의 치밀화에 대한 제조공정변수의 영향
박희동,안치원,조건,윤병일,김광수,Park, H.D.,Ahn, C.W.,Cho, K.,Yoon, B.Y.,Kim, K.S. 한국재료학회 1994 한국재료학회지 Vol.4 No.3
프로판($C_3H_8$)을 반응가스로 사용하여 등온 저압화학기상침투법(low-pressure chemical vapor infiltration)으로 탄소/탄소 복합재료를 치밀화 할 때 반응온도, 반응가스농도, 가스유량, 반응압력 등의 제조공정변수들이 치밀화에 미치는 영향을 알아보기 위하여 실험계획법(Rdbust design method)에 의한 실험을 행하였다. 1회의 등온 저압화학기상침투 실험으로 탄소/탄소 복합재료의 부피 밀도와 표면과 내부의 부피 밀도의 차이를 특성치(characteristic value)로 한 실험계획법의 분산분석(analysis of variance)에 의하면 반응온도, 반응가스농도, 가스유량 등의 제고공정변수가 치밀화에 기여도가 높으며, 반응압력의 기여도와 제조공정변수들의 교호작용(interaction)에 의한 기여도는 낮은 것으로 나타났다. 반응온도가 $1100^{\circ}C$, 반응가스농도가 100% $C_3H_8$, 가스유량이 100 SCCM, 반응압력이 5torr인 조건에서 탄소/탄소 복합재료는 가장 높은 부피 밀도값을 나타내었으나 시편의 표면과 내부의 부피 밀도 차이값은 컸다. The effect of processing parameters, temperature, gas concentration, gas flow rate and pressure, were studied on the densification of carbon/carbon composites using a Robust design method in isothermal low-pressure chemical vapor infiltration with a gas system of $C_3H_8-N_2$ After one time of isothermal low-pressure chemical vapor infiltrat.ion, the bulk density of carbon/carbon composites in creased up to 1-9% and apparent porosity of the composites decreased down to 20-50%. ANOVA analysis of the experiment.al data revealed that the important parameters of isothermal lowpressure chemical vapor infiltration were temperature, gas concentration and gas flnw rate. 'There was almost no ~ f f e c t on densification by pressure and interaction between each parameters. In t, he present experimental conditions, the highest bulk density was obtained at $1100^{\circ}C$ temperature, 100% $C_3H_8$, concentration, 100 SCCM flow rate and 5 torr pressure.
고분자 전구체 용액으로부터 분무열분해법에 의해 합성되어진 구형 형상의 Y<sub>2</sub>SiO<sub>5</sub>:Ce 형광체
강희상,강윤찬,박희동,설용건,Kang, H.S.,Kang, Y.C.,Park, H.D.,Shul, Y.G. 한국재료학회 2003 한국재료학회지 Vol.13 No.3
Ce-doped $Y_2$SiO$_{5}$ phosphor particles of spherical morphology, fine size, high crystallinity and high photoluminescence (PL) intensity were prepared by spray pyrolysis. When nitrate precursor solution is adopted, hollow particles were formed by uneven drying rate between surface and inside of droplet. Citric acid and ethylene glycol were introduced as polymeric precursor to control the morphology of particles. When polymeric solution is adopted, polymeric chain is formed by the esterification reaction between carboxyl and hydroxy groups of citric acid and ethylene glycol, and considered as controlling the drying characteristics of droplet. $Y_2$$SiO_{5}$ :Ce phosphor particles prepared from polymeric precursor solution were spherical, filled, fine size and not agglomerate before and after post heat treatment. The optimum doping concentration of cerium was 0.5 mol% of overall solution concentration. The optimum amount of TBOS of high PL intensity and pure crystallinity of X2-type $Y_2$$SiO _{5}$ was 105% of stoichiometric amount. The PL intensity of $Y_2$X$/_{5}$ :Ce phosphor particles prepared using the polymeric precursor solution was 164% of that of the nitrate precursor solution due to homogeneous composition and good morphology.y.