http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
방사성동위원소 용액 분배용 리프트 장치 및 이를 이용한 분배 방법
남성수,박울재,조은하 (사)한국방사선산업학회 2021 방사선산업학회지 Vol.15 No.4
Radiation emitted from radiopharmaceuticals is medically utilized for diagnosis ortreatment of patients. However, radiation produced during the production of radiopharmaceuticalsmay result in unnecessary exposure to workers. This study concerns an automatic distributionsystem of radioactive solutions to minimize radiation exposure by workers in the productionof radiopharmaceuticals. We automated the process of recovering radioactive solutions intosyringes and distributing recovered solutions to empty vials to reduce exposure during the 131Iradiopharmaceuticals production process. In addition, we developed a distribution system thatallows the placement of a number of empty vials and the movement of the tray with empty vialsin order to perform the production process conveniently. The reduction in radiation exposurethat workers receive is directly related to worker safety. If this system is applied to the actualproduction process, it is expected to contribute to the safe performance of the radiopharmaceuticalsproduction process.
방사성동위원소 생산을 위한 표적용기 제작 및 생산효율 측정
남성수,박울재,조은하,임재청 한국방사선산업학회 2021 방사선산업학회지 Vol.15 No.3
A new type of quartz ampoule was manufactured to reduce the contamination aroundthe production system and to increase production efficiency during radioisotope production. Themanufactured quartz ampoule has a small funnel attached to the inside to prevent overflow duringthe chemical process. This has the advantage of reducing losses of the irradiated target materialand minimizing the contamination of production system. 177Lu radioisotope was produced usinga new type quartz ampoule, and it was confirmed that there was no problem with the productionprocess. When comparing the production efficiency of 177Lu with the new type quartz ampouleand the previous model, it was found that the production efficiency was usually increased by 13 to26%. Based on these results, it is planned to apply a new quartz ampoule to neutron irradiationand radioisotope production of various nuclides.
STS 204L의 Nd:YAG 레이저 용접에서 용접조건이 용접부 형상에 미치는 영향
이형근,한현수,박울재,석한길,홍순복 대한용접접합학회 2004 대한용접·접합학회지 Vol.22 No.1
The control of the weld bead shape is important in laser welding of the small parts. The effects of laser welding parameters on the weld bead shape in the pulsed Nd:YAG laser welding of STS 304L material were investigated. Shielding gas type, flow rate, pumping voltage, pulse frequency, pulse width, focal position and overlap distance were selected as laser welding parameters. Experiments were designed and conducted using the Taguchi method which was a statistical experimental method. The weld bead width, penetration, area and aspect ratio were measured and analysed as the weld bead shape properties and the welding parameters were optimized to maximize the weld aspect ratio. Weld aspect ratio were greatly affected by the pulse width, pumping voltage and pulse frequency, and somewhat by the overlap distance, and little by the shielding gas type, flow rate and focal position. A confirmation experiment were conducted using the optimized welding parameters.
조은하,최강혁,박울재,정성희 한국공업화학회 2016 한국공업화학회 연구논문 초록집 Vol.2016 No.0
방사성동위원소는 핵종별로 지니는 고유의 특성에 따라 특정한 에너지의 방사선을 방출하며, 이러한 특성을 활용하여 일부 핵종은 방사성의약품으로 개발되어 의료적으로 사용되고 있다. 대표적으로 사용되는 핵종은 PET 진단에 활용되는 F-18과 SPECT 진단에 활용되는 Tc-99m, 그리고 갑상선암 치료에 사용되는 I-131이며, 이러한 핵종을 사용하는 방사성의약품은 타 의약품과 비교하여 사용범위가 넓지는 않지만 활용되는 범위 내에서는 대체 불가능한 기능을 수행하고 있다. 최근에는 방사성동위원소에 바이오 기술을 도입한 표적 치료제와 산업적으로 활용되고 있는 밀봉기술을 도입한 근접치료제의 연구 및 개발이 활발하게 진행되고 있으며, 신약개발을 위한 제0상 임상시험(Phase 0)을 가능케 하는 핵종에 대한 연구도 시도되고 있다.
의료용 방사성동위원소의 사용기간 연장을 위한 동위원소 농축 장치에 대한 연구
최강혁,이준식,박울재,김종범,장범수 한국공업화학회 2015 한국공업화학회 연구논문 초록집 Vol.2015 No.0
방사성동위원소의 높은 투과성과 에너지는 의료분야에서 외과적 수술없이 진단과 치료가 가능하게 하는 핵심물질이다. 특히, 방사성동위원소를 편리하게 장기간 사용할 수 있는 동위원소발생기의 개발은 의료적 활용에 있어서 새로운 페러다임을 가져왔다고 할 수 있다. 그 대표적 발생기는 99mTc와 188Re이 있으며 이는 각각 진단용, 치료용으로 활용된다. 의료용 동위원소 발생기는 장기간 사용시 단위부피당 방사능의 양은 어미핵종의 반감기에 의해 지수적으로 감소하게 되어 환자의 투여 용량을 초과하게되어 의약품으로 사용이 불가능하게 된다. 특히. 2000년 후반들어 동위원소를 생산공급하는 세계원자로가 노후화로 인하여 동위원소 수급 불안이 발생하였으며 실제 국내에서도 동위원소의 공급이 중단되는 사태가 발생하기도 하였다. 이러한 문제점을 일부 해소하는 방법은 잔여 동위원소를 농축하여 활용하는 방법이 있다. 본 연구 발표에서는 화학적 프로세스와 개발된 장비를 통해잉여 동위원소를 농축 재활용하는 방법을 소개하며 나아가 동위원소 발생기 사용연장을 위한 농축기술을 소개하고자 한다.