http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
진공증착법을 이용한 P(VDF-TrFE) 공중합체 박막의 압전특성에 관한 연구
박수홍,Park, S.H. 한국진공학회 2008 Applied Science and Convergence Technology Vol.17 No.3
본 실험은 P(VDF-TrFE) 공중합체 박막을 제조하고 압전특성을 검토하는데 있다. 또한 압전 특성 분석에서 압전 계수 $d_{33}$와 압전 전압 계수 $g_{33}$는 증착 온도가 $260{\sim}300^{\circ}C$ 까지는 32.3pC/N에서 36.28pC/N, $793{\times}10^{-3}V{\cdot}m/N$에서 $910.5{\times}10^{-3}V{\cdot}m/N$으로 증가하는 경향을 나타내었다. 이상의 실험 결과로 $300^{\circ}C$의 온도에서 P(VDF-TrFE) 공중합체 박막을 제조 할 때 최적의 특성이 나타남을 알 수 있었다. 반면에 증착온도가 $320^{\circ}C$에서 증착한 경우에는 각각 25.3pC/N, $680.3{\times}10^{-3}V{\cdot}m/N$으로 감소하였다. In this research, the P(VDF-TrFE) copolymer thin films were prepared by the physical vapor deposition and studied to their piezoelectric properties. In the case of a specimen produced by varying the deposition temperature from $260^{\circ}C$ to $300^{\circ}C$, its piezoelectric coefficient($d_{33}$) increased from 32.3pC/N to 36.28pC/N, and piezoelectric voltage coefficient($g_{33}$) from $793{\times}10^{-3}V{\cdot}m/N$ to $910.5{\times}10^{-3}V{\cdot}m/N$. On the basis of these experimental results, we concluded that the P(VDF-TrFE) copolymer thin film prepared at $300^{\circ}C$ showed the optimum piezoelectric properties. At the deposition temperature of $320^{\circ}C$, its piezoelectric coefficient(d33) decreased 25.3 pC/N and piezoelectric voltage coefficient($g_{33}$) $680{\times}10^{-3}V{\cdot}m/N$.
박수홍,Park, Su-Hong 한국정보통신기술협회 2006 TTA저널 Vol.103 No.-
지난해 11월초 열린 제64차 IETF(Internet Engineering Task Force) 국제 표준화회의에서는 휴대인터넷(WiBro, 와이브로) 서비스에 필요한 IPv6 기술표준을 제정할 표준 실무그룹인 16NG(IPv6 ove IEEE 802.16(e)Networks) 회의가 한국의 주도하에 신설되었다. 2006년 상반기, 세계 최초의 상용 서비스를 목표로 하는 우리나라의 와이브로 서비스의 해외시장 확산에 기여하게 될 이번 쾌거에 따라 TTA저널 2006년 신년호 인터뷰는 한국주도의 최초 IETF 워킹그룹 탄생에 의미를 부여하며 16NG에서 다루게 될“와이브로+IPv6 컨버전스 표준화”에 대하여 본 워킹그룹의 의장으로 선임예정인 삼성전자의 박수홍 선임연구원으로부터 관련 기술의 과거, 현재, 미래에 대하여 들어본다.
Electronics System Design of a Generic Meteorological Buoy
박수홍,Park, Soohong Korea Institute of Electronic Communication Scienc 2010 한국전자통신학회 논문지 Vol.5 No.1
본 논문은 일반적인 기상관측 부이시스템에서의 전자시스템설계에 관한 것이다. 주로 기지국, 데이터처리, 파워시스템설계 등의 기상관축 부이용 전자통신시스템 설계에 관한 것이다. 연구결과 시스템 설계가 기지국에서 부이를 통하여 배터리 사용시간을 확인하였고, 추가적인 파워의 소비 없이 자체적으로 부이에서의 작용함을 알 수 있다. This paper is to study and design a generic electronics system for a meteorological buoy. It mainly covers the communication methods of a buoy with base station, data post processing and power design of a generic weather buoy system. The experiment result shows the design is capable to works well in term of data receive from buoy at base station, battery life time and able to work standalone without any power exhausted problem.
16ng: IP over IEEE 802.16 Networks
박수홍,황철주,김한성,Park Su-Hong,Hwang Cheol-Ju,Kim Han-Seong 대한전자공학회 2006 전자공학회지 Vol.33 No.8
2006년 IEEE 802.16e 워킹그룹을 통해 완료된 Broadband Wireless 기술은 무선 통신시장에 큰 변화를 가져왔다. 기존에 WLAN의 Hot Spot 서비스를 통해 좁은 범위에서 사용하던 무선 인터넷이 이제는 값싸고 질 좋은 서비스를 언제 어디서나 사용할 수 있는 기술로 발전된 것이다. 이는 곳 국내 WiBro 서비스로 이어지면서 IEEE 802.16e 기술 기반의 광대역 무선 인터 넷 서비스를 창출하고 있다. IEEE 802.16e 워킹그룹에서의 PHY/MAC 기술 개발과 함께 인터넷 표준을 연구하는 IETF에서도 IEEE 802.16 기술상에서의 IP 및 Mobility 기술을 중심으로 한 새로운 표준연구 움직임이 2005년부터 시작되었고 이는 16ng 워킹그룹 신설이라는 결과로 이어졌다. 본 논문에서는 16ng 워킹그룹의 설립배경, 목적 및 관련된 최근 동향을 살펴보고자 한다.
진공증착법으로 제조된 PVDF 유기박막의 압전 센서 응답 특성에 관한 연구
박수홍,Park, Soo-Hong 한국진공학회 2008 Applied Science and Convergence Technology Vol.17 No.5
본 논문의 목적은 진공증착법을 이용한 $\beta$-PVDF($\beta$-Polyvinylidene fluoride) 유기 박막의 제조와 제조된 유기 박막의 압전 특성을 연구하는데 있다. 진공 증착은 증발원 온도 $270^{\circ}C$, 인가 전계 142.4kV/cm, 진공도 $2.0{\times}10^{-5}Torr$에서 실시하였다. 기판 온도의 증가에 따라서 $\beta$형태의 PVDF 함유량은 72%에서 95.5%로 증가함을 알 수 있었다. 힘 모우멘트를 $1.372{\times}10^{-5}N{\cdot}m$에서 $39.2{\times}10^{-5}N{\cdot}m$로 변화시킨 응답특성의 경우, 출력전압은 1.39V에서 7.04V로 증가하였다. The purpose of this paper is to discuss the fabrication of $\beta$-PVDF($\beta$-Polyvinylidene fluoride, ${\beta}-PVF_2$) organic thin films through the vapor deposition method and to investigate the piezoelectric properties of the organic thin films produced. Vapor deposition was performed under the following conditions : the temperature of evaporator, the applied electric field and the pressure of reaction chamber were $270^{\circ}C$, 142.4 kV/cm and $2.0{\times}10^{-5}Torr$, respectively. The results showed that the amount of $\beta$-form PVDF increased from 72 % to 95.5 % with an increase in the substrate temperature. In the case of a sensor response characteristic by varying the force moment from $1.372{\times}10^{-5}N{\cdot}m$ to $39.2{\times}10^{-5}N{\cdot}m$, the output voltage increased from 1.39V to 7.04V.