http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
신동익,무하마드하룬,민경성,이광명,이정윤 한국구조물진단유지관리공학회 2020 한국구조물진단유지관리공학회 논문집 Vol.24 No.1
본 연구에서는 실험을 통하여 자기치유 재료 혼입 모르타르 보의 자기치유 성능을 평가하였다. 실험에는 일반 모르타르 보 실험체와 자기치유 모르타르 보 실험체가 사용되었으며, 모르타르의 압축강도, 내력 및 균열의 자기치유 효과를 비교하여 자기치유 성능을 평가하였다. 실험결과 자기치유 재료를 혼입한 모르타르의 압축강도가 일반 모르타르의 압축강도보다 작았지만 28일 압축강도에 대한 118일 압축강도 비율은 동일하게 나타났다. 실험체의 내력은 재령일이 길어질수록 증가하는 경향을 나타냈다. 일반 모르타르 실험체는 균열이 발생할 경우 재령일이 증가하여도 하중은 회복되지 않았으나 자기치유 모르타르 실험체의 경우 반응 생성물의 영향으로 내력이 다소 회복되는 경향을 나타냈다. 균열폭은 두 종류의 실험체 모두 치유기간이 지난 후 감소하는 경향을 보였으나 자기치유 모르타르 실험체에서만 반응 생성물이 관찰되었다. In this study, the self-healing performance of mortar beams containing self-healing materials was evaluated through experiments. Normal mortar beams and self-healing mortar beams were used In the experiments. The self-healing performance was evaluated by comparing the mortar compressive strength, member strength, and self-healing effects of cracks. The experimental results showed that the compressive strength of mortar containing self-healing material was smaller than that of normal mortar, but the ratio of 118 days compressive strength to 28 days compressive strength was the same. The member strength tended to increase with increasing curing period. In normal mortar specimens, the member strength did not recover even if the curing period increased, but the strength of the self-healing mortar specimens tended to recover as reaction products were produced. The crack width tended to decrease after the healing periods in both specimens, but the reaction product was observed only in the self-healing mortar specimens.
건설자재 미세먼지 제거율 평가를 위한 선형 회귀 분석법 제안
박광민 ( Kwang-min Park ),민경성 ( Kyung-sung Min ),정상화 ( Sang-hwa Jung ),노영숙 ( Yonug-sook Roh ) 한국구조물진단유지관리공학회 2021 한국구조물진단유지관리공학회 논문집 Vol.25 No.5
미세먼지를 제거하기 위하여 미세먼지 제거 기능성 건설자재가 개발되고 있다. 그러나 미세먼지 제거율 평가 방법 및 기반 시설은 국내에 전무한 실정이다. 따라서 본 연구에서는 입자상 미세먼지 제거 성능을 평가하기 위해 미세먼지 제거율 시험 챔버를 구축하고 입자상 미세먼지 제거율 평가 방법을 제시하는 것을 목적으로 하였다. 결과적으로 건설자재는 미세먼지가 발생하는 환경에서 유효성을 가지기 때문에, 시험 입자 주입 단계 구간를 비교 대상으로 제안하였다. 미세먼지 주입 단계에서 측정한 모든 질량농도값에서 선형 회귀 분석으로 얻어진 기울기값을 상대 비교함으로써 미세먼지 제거율 평가를 제안하였다. 본 방법은 모든 측정값을 대상으로 하고 측정값 변동성에 대한 평가를 결정계수(R<sup>2</sup>)로 평가할 수 있어서 미세먼지 제거율 결과값의 신뢰성을 확보할 수 있다. In order to remove particulate matter, functional construction materials are developed. However, there is no evaluation method and infrastructure for particulate matter removal rate. Therefore, the purpose of this study was to build a particulate matter removal rate test chamber and to present a method for particulate matter removal rate. As a result, since construction materials have effectiveness in an environment where particulate matter is generated, the particulate matter injection step was proposed as a comparison target. The evaluation of the particulate removal rate was proposed by relative comparison of the slope values obtained by linear regression analysis for all concentration values measured in the particulate matter injection step. In linear regression method, all measured values can be evaluated, and the variability can be evaluated with the coefficient of determination (R-square), so that the reliability of the particulate matter removal rate can be secured.